EBS Stanley Clarke Signature Acoustic PREAMP User Manual

USERS MANUAL EBS STANLEY CLARKE PREAMP

A -TUNER OUT. This output is taken at the FX send and can be used to connect
to a tuner. This output becomes active when Mute is on.

B/C -FX LOOP. Connect a TRS cable, such as the EBS ICY-30, to B to create an
Effects Loop where you can insert your effects. C offer the choice to set the
effects loop in parallel mode.

D-OUTPUT. This is the master output jack to be connected to another amp or
power amplifier.

E- CHANNEL B INPUT. This input is a direct input to the B channel or to both A+B
if the A+B switch is in its’ inner position.

F- A+B. When A+B push switch is in its’ OUTER position:
Selects between A or B channel when only the A input (INPUT) is used.
If XLR input or B channel 1/4” jack is used at the same time, B selects this source.

When A+B push switch is in its’ INNER position:
Selects between A or A+B, i.e. either only A or A in series with B channel when
only A input is used. When B channel input jack is used or XLR is selected for
channel B, both channels are mixed together and the A/B foot switch has no
effect.
G- INPUT – The A channel input is a low noise, high impedance instrument input.

TECHNICAL SPECIFICATIONS

FOR MORE PEDALS, AMPS &
ACCESSORIES, SCAN THE QR-CODE TO VISIT
WWW.EBSSWEDEN.COM

BLOCK DIAGRAM – STANLEY CLARKE ACOUSTIC SIGNATURE PREAMP

Read More About This Manual & Download PDF:

EBS Stanley Clarke Signature Acoustic PREAMP User Manual – Optimized PDF
EBS Stanley Clarke Signature Acoustic PREAMP User Manual – Original PDF

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>