MEEaudio Truely Wireless Sports Earphones X10 User Manual
- June 8, 2024
- MEEaudio
Table of Contents
truly wireless sports earphones
www.MEEaudio.com/X10
Model: X10
GETTING STARTED
UNDERSTANDING THE X10
The right earpiece connects to your
Bluetooth device. It can also be used
independently as a mono headset.
The left earpiece automatically connects to the right earpiece. It cannot be
used
independently.
STEP 1: CHARGING
Connect charging case to a USB charger.
Charging Case Battery Indicator Lights
Place both earpieces in case to charge.
Controls are disabled when
earpieces are inside charging case.
Earpiece Indicator Lights
3: FITTING
Select the eartips with the best sound
and comfort for your ears.
Identify the left and right earpieces.
Put each earpiece in the corresponding ear.
Adjust each earpiece until it fits flush in your ear and the eartip seals the
ear
canal. If your music sounds tinny or lacks bass, try different eartips.
STEP 4: POWERING OFF
When done listening, place both
earpieces back in the case.
If earpieces are sweaty or damp, allow them to dry fully before
storing them in the case.
SUBSEQUENT USE
When removed from the charging case, the X10 reconnects automatically to the
last paired Bluetooth device that is in
range.
To reconnect manually, open the Bluetooth menu on your device and
select “MEE audio X10” from the Bluetooth device list.
You can also use just the right earpiece as a mono headset by leaving the left
earpiece in the case.
PAIRING NEW DEVICES
To manually enter pairing mode:
Remove right earpiece from case, press and hold the
button for 5 seconds to power it off, then press and hold
the button for 5 seconds again until the blue and white
lights flash indicating pairing mode.
Select “MEE audio X10” in the Bluetooth menu of
the new device you wish to pair to complete the
pairing process.
FUNCTIONALITY & CONTROLS
Controls are disabled when earpieces are inside charging case.
TROUBLESHOOTING
Factory Reset
A factory reset can be used to restore all features to their factory settings
and delete all previous Bluetooth pairings from memory. Before the X10 can be
used again, a new pairing will need to be created.
-
Place both earpieces in the case. Next,
remove the right earpiece from case.
-
Press and hold the button for 5 seconds to power it off, then press and hold the button for 5 seconds again until the blue and white lights flash in an alternating manner, indicating pairing mode.
-
Once the right earpiece is in pairing mode, press the button 6 times rapidly
to reset the earpiece. A white light will come on indicating that it was reset.
-
Put the right earpiece back in the case.
-
Take left earpiece out of the case.
-
Press the button on the left earpiece 6 times rapidly to reset the earpiece.
A white light will come on indicating that it was reset.
-
Put the left earpiece back in the case.
-
Take both earpieces out of the case and follow the instructions in the “PAIRING” section to create a new pairing with your device.
WARNINGS
Using headphones at high volumes for extended periods of time will result in
permanent hearing damage. It is advised you keep volume levels moderate to low
at all times for your safety. Turn
the volume all the way down after connecting your earphones, then gradually
increase thevolume until you reach a comfortable listening level. Do not use
headphones while driving a car,
cycling, operating machinery, or performing other activities that require
hearing surrounding sounds.
Keep the device and packaging out of reach of children.
This device is designed and manufactured to operate within its defined design
limits. Misuse
may result in electric shock or fire. Read and follow these instructions
carefully.
-
If submersed in water, do not turn the device on until completely dried.
Note: liquid submersion voids the warranty. -
To prevent fire or shock hazards, do not expose this unit to rain or moisture. If the device
comes in contact with liquids, quickly wipe away. If submersed in water, do not turn the
device on until completely dried. Note: liquid submersion voids the warranty. -
Danger of explosion or fire if batteries are damaged. Keep away from direct sunlight, naked
flames, flammable gasses, or heat sources such as radiators or stoves -
Do not use around flammable gasses as fire or explosion may occur.
-
There are no user replaceable/reparable parts in the device. Disassembling it will void your warranty.
-
Only use attachments/accessories specified by the manufacturer
Changes or modifications to this unit not expressly approved by MEE audio could void the user’s authority to operate the equipment.
COMPLIANCE INFORMATION
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC RULES
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the
following measures:
- Relocate the receiving antenna.
- Increase the separation between equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
DISPOSAL AND RECYCLING
Dispose of this product in accordance with all local laws and regulations.
Because this product contains electronic components and a battery, it must be
disposed of separately from household waste. Contact local authorities to
learn about disposal and recycling options.
WARRANTY
MEE audio products purchased from authorized resellers are covered by a
1-year manufacturer warranty. For more information, contact your local MEE
audio dealer or visit MEEaudio.com/Support
MEE audio and its logo are registered trademarks of S2E, Inc. All rights
reserved.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license.
Other trademarks and trade names are those of their
respective owners. Siri® is a registered trademark of Apple Inc.
Google Assistant is a trademark of Google Inc.
FOR ADDITIONAL SUPPORT
Scan QR code or enter the URL 
below into your web browser:
MEEaudio.com/X10Support
QUESTIONS?
WE’RE HERE TO HELP!
Phone Support: 626-965-1008
Monday ~ Friday 9:00 am to 5:00 pm PST
Email Support: support@MEEaudio.com
All emails are responded to within 2 business days
Read More About This Manual & Download PDF:
MEEaudio Truely Wireless Sports Earphones X10 User Manual – Optimized
PDF
MEEaudio Truely Wireless Sports Earphones X10 User Manual – Original
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>