SENTRILOCK Bluetooth Realtor Lockbox Installation Manual
- June 8, 2024
- SENTRILOCK
Table of Contents
Bluetooth® REALTOR® Lockbox
Installation Manual
The Bluetooth® REALTOR® Lockbox is designed to be attached, by a shackle,
directly to a building or other secure structure. The Lockbox has been
certified to Loss Prevention Standard (“LPS”) 1175, Level 1 when attached to a
substrate or object where it cannot be compromised or removed. Attaching the
lockbox to an unsecure substrate will invalidate the security rating. It is
important that the end-user follows this instruction manual to retain the
awarded LPS certification. Should it be required to attach a lockbox on other
than a secure substrate, please contact SentriLock to discuss suitable
options. The purpose of this manual is to act as a reference manual for the
installation of The Bluetooth® REALTOR® Lockboxes. The document remains the
property of SentriLock, LLC.
Installation
Location/Position
- It is recommended that the Lockbox be mounted in a location that makes attacks more difficult to reduce the leverage an attacker can impart on the lockbox.
- It is important that the lockbox is hanging vertically from the shackle to prevent rain/moisture from entering the lockbox. Failure to mount in a vertical position may render the lockbox inoperable.
Installation
SentriCard®
1. Insert your SentriCard® into your lockbox.
2. Wait for the lockbox to display the CODE light, then type your PIN into
the lockbox keypad and press ENT.
Note: Do not remove your SentriCard® from the lockbox.
3. When the lockbox displays the READY light, press FUNC + 1 + ENT.
4. While firmly holding the lockbox, the lockbox will display the READY
light, indicating that it is time to pull the shackle out of the lockbox. The
shackle will come all the way out of the lockbox. If you are not holding onto
the lockbox when the shackle unlatches, it could fall to the ground.
Note: When using FUNC+1 to release the shackle, please wait for the motor
to reset itself and the red DND light to go out before re-inserting the
shackle into the lockbox. To reinsert the shackle, firmly press the shackle
into the lockbox. The shackle is reversible, so it does not matter which way
you insert it. You may have to wiggle it slightly to get it to go into the
lockbox. Make sure you hear or feel a positive “click” that confirms the
shackle latch has engaged.
SentriSmart® App
1. Launch the app.
2. Select My Lockboxes from the navigation tray at the bottom of the screen.
3. Select the lockbox serial number you would like to attach to the property.
4. From the menu provided, select Release Shackle for BLE products or Shackle
Release Code for Non-BLE products
5. Following the screen prompts for assigning a lockbox to a listing.
SENTRILOCK Bluetooth Realtor Lockbox Installation Manual – Download
[optimized]
SENTRILOCK Bluetooth Realtor Lockbox Installation Manual –
Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>