Bissell 2151 Series Multi Reach Stick Vacuum User Guide

: June 8, 2024
: Bissell

Table of Contents

MULTI REACH Stick Vacuum
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MULTI REACH Stick Vacuum

USER GUIDE
2151 SERIES

2151 SERIES

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE. RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

Do not use in rain or leave outdoors while raining.

WARNING: Basic safety precautions should always be observed when using an electrical appliance, including the following to reduce the risk of fire, electrical shock, or injury:

Personal Safety:

Store indoors in a dry place out of the reach of children.
Always use responsibly. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Don’t let children play with the appliance; supervise children using or maintaining the appliance.
Use only manufacturer’s recommended attachments as described in this manual; misuse or use of any accessory or attachment other than those recommended, may present a risk of personal injury.
Take extra care when cleaning stairs.
Keep the appliance and accessories away from hot surfaces.
Do not block the appliances openings or hinder air flow; keep openings free of any objects including dust, lint, clothing, fingers (and all parts of the body).
Particularly keep hair, hands and feet away from the brush bar and other moving parts.
Do not store appliance leaning up against the wall.

Electrical safety:

Only use batteries and chargers supplied by BISSELL.
Never modify the charger in any way.
The charger has been designed for a specific voltage. Always check that the mains voltage is the same as that stated on the rating plate.
A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack; never use the charger with another appliance or attempt to charge this product with another charger.
Before use, check the charger cord for signs of damage or ageing. A damaged or entangled charger cord increases the risk of fire and electric shock.
Do not abuse the charger cord.
Never carry the charger by the cord.
Do not pull the cord to disconnect from a socket; grasp the plug and pull to disconnect.
Don’t wrap the cord around the charger when storing.
Keep the charger cord away from hot surfaces and sharp edges.
The supply cord cannot be replaced. If the cord is damaged the charger should be discarded and replaced.
Do not handle the charger or the appliance with wet hands.
Do not store or charge the appliance outdoors.
The charger must be removed from the socket before removing the battery, cleaning or maintaining the appliance.
Ensure the appliance is off before connecting or disconnecting the motorised brush bar.

Battery safety:

This appliance includes Li-Ion batteries; do not incinerate batteries or expose to high temperatures , as they may explode.
Liquid ejected from the battery may cause irritation or burns.
In an emergency situation contact professional help immediately!
Leaks from the battery cells can occur under extreme conditions. Do not touch any liquid that leaks from the battery. If the liquid gets on the skin wash immediately with soap and water. If the liquid gets into the eyes, flush them immediately with clean water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle the battery and dispose of immediately in accordance with local regulations.
Shorting the battery terminals may cause burns or fire.
When the battery pack is not in use, keep it away from paper clips, coins, keys, nails, screws or other small metal objects that could make a connection from one terminal to another.
When you dispose of the appliance remove the battery and dispose of the battery safely in accordance with local regulations.

Service:

Before using the appliance and after any impact, check for signs of wear or damage and repair as necessary.
Do not use the appliance if any part is damaged or defective.
Repairs should be carried out by a service agent or a suitably qualified person in accordance with relevant safety regulations. Repairs by unqualified persons could be dangerous.
Never modify the appliance in any way as this may increase the risk of personal injury.
Only use replacement parts or accessories provided or recommended by BISSELL.

Intended use:

This appliance has been designed for domestic dry vacuum cleaning only.
Do not pick up liquids or use on wet surfaces.
Do not pick up anything that is flammable, burning or smoking.
Use only as described in this manual.
Don’t use on concrete, tarmacadam or other rough surfaces.
The brush bar may damage certain floor surfaces. Before vacuuming flooring, rugs or carpets, check the flooring manufacturer’s recommended cleaning instructions. If damage occurs, stop use immediately.
May damage delicate fabrics or upholstery. Care should be taken on loose-weave fabrics or where there are loose threads. If in doubt please test on an inconspicuous area first. If damage occurs, stop use immediately.

WARNING:

Do not use water, solvents, or polishes to clean the outside of the appliance; wipe clean with a dry cloth.
Never immerse the unit in water and do not clean in a dish washer.
Never use the appliance without the filter fitted.

Thanks for buying a BISSELL vacuum!

We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your Multi Reach works as well as it does today for years to come, so this guide has tips on using (pages 5-7), maintaining (pages 8-9), and if there is a problem, troubleshooting (page 10).

In just a few simple assembly steps, you’ll be ready to vacuum. Let’s get started!

What’s in the Box

Operation

You can use the Multi Reach straight out of the box. The dusting brush can be slotted onto the nozzle. The crevice tool is stored inside the handle.

Push the button to switch the Multi Reach ON. Push again to switch OFF.

Power floor head assembly

To attach the powered floor head, remove the nozzle by pulling gently on the green locking ring until the nozzle comes free from the body. The power must be OFF while changing tools.

Take the powered floor head and attach it to the extension wand. It will click into place.

Attach the extension wand to the Multi Reach by aligning white dots and clicking into place.

Emptying the dirt bin

To remove the dirt bin, firmly grasp the dirt bin and pull out.

Locate the release latch and pull to open the dirt bin and empty. You may also remove the filter from the dirt bin. Gently tap the filter to help remove excess dust and debris. Ensure all debris is removed from the seal and latch before closing the lid.

Battery charging

Recharge the battery when a single green light flashes. 1-4 slow blinking green lights indicates it is charging.

Plug the charger in and connect it to the battery

After 5 hours the LEDs turn green and charging is complete.

It is OK to charge for 1 hour for a burst of cleaning.

BATTERY LIGHT STATUS

Removing and cleaning the brush bar

Remove the extension wand from the Multi Reach by pulling gently on the green locking ring.

Before you remove the brush bar, you will need to remove the power floor head from the extension floor tube. To do this, gently pull on the green locking ring.

Rotate the latch on the side of the powered floor head and pull out the brush bar.

Clean the brush bar as needed. Never operate the powered floor head without the brush roll installed.

Cleaning the filter

Remove the filter by pulling it from the top of the bin. Tap the dirt from the filter and tip any dirt from the filter housing. Wash the filter if necessary.

You may gently wash the filter under warm water. Do not use detergents or soaps. The filter must be completely dry before using it. Never put the bin back without the filter inside. You could damage the motor.

Removing the battery

Press the green buttons and pull to remove the battery. The battery can be charged on or off the main unit.

Product Care

Your BISSELL Multi Reach doesn’t need much maintenance: keep the filter clean, check for blockages, remove hair from the brushbar and charge the battery. Wipe it with a dry cloth if it gets dirty, including the area under the bin. Never wash it with liquid, run it under a tap or use it without the filter.

Trouble Shooting

Service

If your BISSELL product should require service:

Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.

Service