Smart Code Touchpad Electronic Deadbolt Quick Installation Guide

June 8, 2024
SmartCode

Smart Code Touchpad Electronic Deadbolt Quick Installation Guide
Models #49709 / 02 909
Smart Code Touchpad Electronic Deadbolt

For select models only.

Smart Code Touchpad Electronic Deadbolt procedure

Smart Code Touchpad Electronic Deadbolt Parts
guidelines

Tools Needed

Smart Code Touchpad Electronic Deadbolt required tools

Check Dimensions
Smart Code Touchpad Electronic Deadbolt Dimensions
Procedure

Smart Code Touchpad Electronic Deadbolt Dimensions
Procedure

Smart Code Touchpad Electronic Deadbolt Dimensions
Procedure

Smart Code Touchpad Electronic Deadbolt Dimensions
Procedure

Smart Code Touchpad Electronic Deadbolt Quick Installation Guide Dimension
procedure

warning icon
Do not use electric drill or electric screwdriver to tighten screws.

Smart Code Touchpad Electronic Deadbolt Dimension
procedure

Insert key and test latch. If latch does not extend or retract smoothly, adjust  crews (H). Remove key when finished.

Smart Code Touchpad Electronic Deadbolt Dimension
procedure

Smart Code Touchpad Electronic Deadbolt Dimension
procedure

Smart Code Touchpad Electronic Deadbolt Deadbolt Dimension
procedure

Smart Code Touchpad Electronic Deadbolt Deadbolt Lock
button

(1) Hold LOCK button on keypad while (2) inserting the battery pack into the interior. The lock will extend & retract deadbolt latch. Two beeps will sound in  approximately 30 seconds to confirm successful installation.

Smart Code Touchpad Electronic Deadbolt Deadbolt Models
only

Keypad

Smart Code Touchpad Electronic Deadbolt keypad

Program Button

Smart Code Touchpad Electronic Deadbolt Program Button

How the keypad works

Each button represents two numbers (i.e. 1 and 2 for the first button). You only need to push the button once to get either 1 or 2. For example: If your code is 1-2-5-6-8,

keypad works

User Codes

Adding User Codes

A total of 8 User Codes (UC) may be programmed.

keypad procedure

Press the Program Button the number of times that corresponds to the UC position being programmed.
Example: If programming the third code, press the button three times.

keypad 4 to 8 digit code

Enter 4 to 8 Digit Code

keypad lock button

Press Lock Button

Keypad test code

Test code. If the code does not work, repeat steps 1-3.

Note: During programming, if no button is pressed for 5 seconds, the system   will time out, and you will need to restart the procedure.

Keep track of the person and code assigned to each UC positon.

Deleting A Single User Code

In order to delete a single UC, you must override the code by programming a new code in the same position. Test the old code to make sure it is inactive.

CAUTION: Prevent unauthorized entry. Since anyone with access to the back panel can change the user codes, you must restrict access to the back panel and routinely check the user codes to ensure they have not been altered without your knowledge.

Normal Operation

Unlocking the door

keypad unlocking door

Optional: Press Lock Button to light up keypad at night.

keypad unlocking 4 to 8 digit code

Enter 4 to 8 Digit Code

Locking the door

keypad locking door button

Press Lock Button

If three incorrect codes are entered consecutively, the keypad will lockout for 60 seconds, after which you may try the code again.

Keypad Warnings

Keypad warnings table

Status LED Color

Status LED Color: Lock Status:

blinking green:  Unlocked:
blinking amber: Locked:
blinking red: Low Battery:
Will still blink red for low battery when switch # 1 is of:

warning iconWARNING: This Manufacturer advises that no lock can provide complete security by itself. This lock may be defeated by forcible or technical means, or evaded by entry elsewhere on the property. No lock can substitute for caution, awareness of your environment, and common sense. Builder’s hardware is available in multiple performance grades to suit the application. In order to enhance security and reduce risk, you should consult a qualified locksmith or other security professional.

For assistance or warranty information:
Kwikset product
1-800-327-5625, USA  & CANADA
or visit www.kwikset.com
Weiser product
USA: 1-800-327-5625
CANADA: 1-800-501-9471
or visit www.weiserlock.com

Smart Code Touchpad Electronic Deadbolt Quick Installation Guide – Download [optimized]
Smart Code Touchpad Electronic Deadbolt Quick Installation Guide – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals