MOFT MD015 Battery Pack Instruction Manual
- June 3, 2024
- MOFT
Table of Contents
MOFT MD015 Battery Pack
USB-C Port
- You can recharge the battery pack using the USB-C Charging Cable that came with the Snap Battery Pack.
- You can charge other devices that support USB-C connection.
- USB-C Input/Output: 5V/2A
LED Battery Level Indicator
Power Button
- To turn on your battery pack, press the power button once.
- To turn off your battery pack, press the button twice quickly.
Instructions
- To charge your IPhone, press the power button once, and put it on your battery pack.
- To recharge your battery pack, plug one end of the USB-C Charging Cable into the USB-C connector on your battery pack. and plug the other end of the cable Into an adapter, then plug the adapter Into a power outlet.
- You can also charge your other device that supports USB–C connection. Your battery pack will automatically wake up and begin charging when connected to your device.
- The wireless charging function activate only when your battery pack is connect to a power adapter end is in charging mode,you need first plug your battery pack into power adapter, then attach your battery pack to your iPhone. Your iPhone will be charged first, then it’s your battery pack.
- If your battery pack doesn’t detect your iPhone in a minute. it will stop charging. You can press the power button once to turn It on again.
- If you do not operate your battery pack for 30 seconds while the power is on, your battery pack will turn off automatically.
- NTC in your battery pack will monitor the temperature change of your battery pack. The temperature range for normal charging is between -10 and 45’C. At temperatures higher than 45″C, charging capacity will be reduced in half. At temperature higher than 56’C or lower than -10’C. your battery pack wil stop charging.
- Compatible devices: iPhone 12 series, iPhone 13 series and later
- You can use your battery pack with a magnetic phone stand such us MOFT Snap-on Phone Stand & Wallet as the Image shown.
Notes
- Store your battery pack in a dry, cool place.
- The operating temperature of your battery pack should be between 0 and 4O’C (32’F and 104’F)
- Don’t disassemble your battery pack. II your battery pack needs service, pleaes have it repired by a qualified person. If not h8ndled properly, it may present e fire risk or a hazard to workers.
- If your battery pack has not been used for a long period of time, we recommend fuly charging it every three months.
- It’s normal for your battery pack to get warm when charging.
- Your battery pack’s maximum capacity wll go down with use over years.
- Don’t place your battery pack in water or fire.
- Don’t use harmful chemicals or cleaners to clean your battery pack.
- If used not properly or dropped. your battery pack can be damaged.
- Don’t dispose your old battery pack with electrocchemical batteries. It should be disposed of as electrical and electronic equipment.
- Don’t use an adapter with output of 6V/7A or lower for your battery pack.
- Wireless charging is more convenient to extend the battery life, but it’s slower in charging due to the limitations of present wireless charging techniques.
- High temperature wil inevitably slow down charging, so we recommend using your battery pack in a place with a tempera lower than 26’C/77°F.
- Positioning of your iPhone or phone case on your battery pack wil affect charging speeds. When devices are properly aligned.
Specifications
- Name: MOFT Battery Pack
- Model No MD016
- Dimensions: 3.8’2.6″0.5 ln/98.6°66.8’12.3 mm
- capacity: 3400mAh
- Rated Capacity: 176OmAh (5V-2A)
- USB-C input: 6V-2A
- USB-C output: 5V-2A
- Wireless output: 7.6W/6W
- Weight: 4 oz/12O g
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is Subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be collocated or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>