American Built Pro WHP26-1D Drilled Plastic Water Heater Instructions
- June 3, 2024
- American Built Pro
Table of Contents
American Built Pro WHP26-1D Drilled Plastic Water Heater
GENERAL
- Recommended for use with electric water heaters only
- Be sure to purchase drilled (drain hole pre-drilled in the side) or undrilled as desired
WATER HEATER PAN INSTALLATION
- Place water heater pan under the area where the water heater is to be placed
- Set water heater down onto the center of pan without putting any weight or force on the sides of the pan
INSTALLING DRAIN HOSE ADAPTER
- Remove circular nut and rubber O-ring from drain hose adapter
- Install drain hose adapter with threaded side through to the inside of pan
- Place the O-ring on the threaded side of adapter (inside of pan) and slide it to the pan inside wall
- Hand-screw the circular nut until the nut is firmly up against the O-ring and inside wall of the pan (hand tight)
- Attach hose (not included) to the outside of the drain adapter, with appropriate cement or glue and run hose to a terminus per your local building code
PLEASE AVOID
- Avoid setting the water heater on the edge of the pan or it may crush the pan
- Avoid stepping on the pan
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>