imperii Wireless Headphones with Load Base Lion User Manual

imperii Wireless Headphones with Load Base Lion

QUICK CONNECTION GUIDE

Take out the left and right (L/R) earphones from the charging compartment, the ears will automatically turn on and connect, and the main headset (R) will enter the pairing state (the red and green light flashes alternately ), open the mobile phone Bluetooth search, click the main ear pair name to connect

PARAMETER CONFIGURATION

• True wireless stereo, left and right channel separation, HIFI sound.
• Both the left and right ears have a full Bluetooth headset function, which can be used alone or in pairs.
• Dual Mode Bluetooth 5.0, ultra low power consumption.
• Bluetooth transmission distance: 10 meters.
• Listening to the song time: about 3 hours for both ears
• Talk time: about 3 hours
• Standby time: about 300 hours
• Charge box charging: about 3 times
• Charging time: 1 hour
• Charging box charging time: 1 hour
• Battery capacity: 3.7V 50mAh
• Charging box battery capacity: 400mAh
• Headphone charging parameters: 5V 45mAh
• Built-in CVC6.0 noise cancellation technology
• Support protocol family:
• A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/DI1.3

BLUETOOTH PAIRING

1. Take the left and right (L/R) earphones, and press and hold the touch button for about 3 seconds. The headphone white and green lights flash alternately into the pairing mode, then double-click the touch buttons of the two headphones, the headphone white light flashes quickly into the TWS pairing mode, waiting for a few The pairing is successful. After the pairing is successful, the main headset will automatically re-enter the pairing mode, and the white and green lights will flash alternately. At this time, the mobile phone opens the Bluetooth search and clicks the headset pairing name to connect;
2. After connecting a pair of headphones to the mobile phone, turn off any one of the headphones (manually shut down or put in the charging box to charge and shut down) and the unclosed headphones will automatically switch to the main headphones and continue to connect with the mobile phone. Will be disconnected, and the next time you use the headset in single or in pairs, it will automatically connect back to the last connected phone after booting;
3. After the binaural connection is successful, if you are not connected to the mobile phone, you can turn off both Bluetooth headsets at the same time if you turn off any one. If you have already connected with the mobile phone, turning off any one headset will not affect the use of another headset.

BLUETOOTH USE

1. Answer the call: When there is an incoming call, click the main button to answer the call.
2. End the call: During the call, click the main button to hang up and end the call.
3. Reject the call: When there is an incoming call, press and hold the main button for 1 second to reject the call.
4. Mobile phone and headset audio switching: In the state of talking, press and hold the main button for 1 second to switch back and forth between the handset and the earpiece.
5. Music playback: When the headset is connected to the mobile phone, click the main button to play the mobile music;
6. Music pause: When playing music, click the main button to pause playback.
7. Music up and down song: left ear (L) double-click the touch button to switch to the previous song, right ear (R) double-click the touch button to switch to the next song;
8. Add and subtract volume: left ear (L) quick combo three touch keys plus volume, right ear (R) quick combo three touch keys to reduce volume;
9. Chinese/English language switching: turn on the white and green lights alternately into the pairing mode, and quickly click the touch key three times to complete the language switching.
10. Shared media: When two headphones are connected and the main headphones are connected to the mobile phone, any one of the headphones can touch the multi-function button to play music, then tap once to pause.
11. The headset is used separately: press and hold the main button for about 5 seconds to enter the pairing mode, the white and green lights flash alternately, the phone turns on the Bluetooth search, and clicks the headset pair name to connect.

CHARGING BOX USE

Function 1: Charging

1. When the power of the headset is low, the headset will be charged into the charging box and closed. The white light of the charging box will flash, and the red indicator light of the headset will be on, indicating that the charging box is charging the earphone. After the battery is fully charged, the indicator light is off. After a while, the light is off. The charging box indicator will also go out to sleep. (Note: When the charging box is charging the earphone or the external USB is charging the charging box, the charging box indicator will flash slowly. The battery level in the box can be judged according to the number of times the indicator flashes. Within 25%, the power is continuously flashed twice, the power is 25%-50%, the power is continuously flashed three times, the power is 50%-75%, and the continuous flashing is four times for the power sufficient state, and the charging indicator battery is fully lit.
2. When the charging box is low, put it into the earphone, the charging box indicator will flash slowly, and the charging box should be charged at this time.

Function 2: Storing headphones

When not in use, the headset can be recharged into the charging box, and it needs to be taken out when it is used. The headset will automatically turn back on the mobile phone, and the headset can be used normally ( Note: When the power of the headset is completely discharged, the charging box can charge the pair of headphones 2-3 times at the same time. If the earphone is not used for a long time, please charge the charging box before use. The charging box will store the earphone for a long time. The battery inside the box will be slow and self-consumption, and may be low.

PROMPT

1. Please read the instruction manual carefully before using the product and keep it in a safe place.
2. For the first time, please fully charge this product first.
3. If the product is not used for a long time (more than 3 months), please charge it.
4. Must choose the national CCC certified charger produced by regular manufacturers
5. When the power of the headset is completely discharged, the charging box can charge 2-3 times for each pair of headphones at the same time. If the earphone is not used for a long time, please charge the charging box and the earphone before use. The charging box will store the earphone for a long time. The battery inside the box will have a slow self-consumption and may have insufficient power.

WARNING

1. Do not hit or squeeze the product
2. Do not let the device get wet with liquid
3. Do not place the device in an environment where the temperature is too low or too high (below 0 ° C or above 45 ° C)
4. Do not use the device during thunderstorms. Thunderstorms can cause the device to malfunction and increase the risk of electric shock.
5. Please avoid using the device indicator near the eyes of children or animals.
6. Please stay away from WIFI routers and other Bluetooth devices to avoid interference with other products using 2,4GHZ signals.
7. Please use this product within the effective distance (10m unobstructed)
8. This product is suitable for all mobile phones, laptops, tablets and desktop computers with Bluetooth devices.
9. Do not charge the charging box with fast charging or flash charging. Please use the charger with rated voltage of 5-5.5V or computer USB charging (the charging box will enter the automatic protection mode when the voltage is higher than 6.5V). Truncate high voltage input to prevent damage to internal components)

TECHNICAL SERVICE:http:/lwww.imperiielectronics.com/contactenos

imperii Wireless Headphones with Load Base Lion User Manual – Download [optimized]
imperii Wireless Headphones with Load Base Lion User Manual – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>