POINTMAN NR Series Retransfer Card Printer User Guide

POINTMAN NR Series Retransfer Card Printer User Guide

Safety Precautions

Explanation of symbols used in this manual

Before using this product, please make sure that you have read the safety precautions described below. The safety precautions noted on this page are categorized as Warning, Caution, Attention, Prohibition and Note. We are not responsible for any injuries or damage when the product is not used in compliance with these precautions.

Power

Use and handling

Cleaning

Installation/storage

Etc

Product Introduction

Information

First of all, thank you for choosing our NR series.

This product is a retransfer card printer that prints images and texts worked on a computer on the surface of a film and then heats them with the pre- printed film on a PVC card. It supports not only magnetic cards designed to allow users to issue cards according to the required specifications in a short time, but also IC cards and RF card issuance functions (option) in accordance with the trend of the times, and also to meet the needs of various customers. Data such as various bar codes, magnets, and photos can be easily edited/printed by linking with Excel. This device is suitable not only for financial systems, but also for membership cards of various membership and bonus card systems, and other employee IDs and passes, and provides quick service with higher mobility by printing directly on the user’s PVC card. Do it.

Component

Important

Please open the product packaging and check the presence and condition of the above items. If there is any damaged or missing item, please contact the dealer from whom you purchased.

Name of Part

NR300 (300DPI)

3 **** Display 4-inch Touch

LCD

| Display the status of the printer and set the printer

through Touch.

4 ** Front cover| Open and close the ribbon and film when replacing it.
5 Front cover closure| Used to lock and open the front cover to prevent theft of film and critical parts.
6 Open front cover button| Press when you want to open the front cover.
7 Power Switch| Use to turn on or off the power supplied to the printer.
8 Card Stacker| used to load the ejected card. (Up to 150 prints)
9 ** Card Output| The printed card is ejected.
10 **** Filter Cover Heat

Button

| When replacing the dust filter, press and remove the filter cover when it is opened.
11 Filter cover| Used to hold filters so they don’t fall out
12 Fan| Heat is emitted from inside the printer to maintain the appropriate temperature.
13 Filter vents| Remove the heat discharged through the Fan outwards.
14 Top cover| Remove the card by opening the top cover in the event of a filter exchange and card singing.
15 Upper Cover Lock key| Use to lock and open the top cover.
16 Open Top Cover button| Press when you want to open the top cover.

computer with USB port which comply with ES1, PS2, and LPS.
3  USB sockets| It is used for USB communication with a memory stick or computer.
4 Ethernet ports| It is used when connecting to a network by connecting a LAN line.
5 RS232C Communication Device| It is used when connecting to a PC with a USB cable.
6 Power-connected ports| Connects to the power supply to supply power to the printer.
7  Filter cover| It is used to hold the filter so that filter does not come off.
8 Anti-theft device slot| It is used to attach a lock to the product for preventing theft.
9 Knob| If a card jam occurs during printing, turn it manually to remove the card.
10 Film Cartridges| It is used when installing a film. (Up to 1200 sheets of film can be installed)
11 Film recovery core knob| When installing the film, turn the knob to prevent sagging.
12 Film core knob| When installing the film, turn the knob to prevent sagging.
13 Cartridge Removable Button| It is used to remove the cartridge.
14 Ribbon Cartridges| it is used when installing a ribbon. (Up to 600 sheets of film can be installed)
15 Cartridge Removable Button| It is used to remove the cartridge attached to the printer.
16 Ribbon recovery core knob| when installing the ribbon turn the recovery core knob to prevent squashing
17 Ribbon core knob| when installing the ribbon turn ribbon core knob to prevent squashing
18 Card stacker and reject box| To prevent card theft, use the lock key to lock and open the card stacker and reject boxes.
19 Card reject box Cover| When you want to remove a card from the card reject box, open and close it.
20 Carrying handle| Prevents slipping when transporting the printer and helps convenient transport

NR600 (600DPI)

3 **** Display 4-inch Touch

LCD

| Display the status of the printer and set the printer

through Touch.

4 ** Front cover| Open and close the ribbon and film when replacing it.
5 Front cover closure| Used to lock and open the front cover to prevent theft of film and critical parts.
6 Open front cover button| Press when you want to open the front cover.
7 Power Switch| Use to turn on or off the power supplied to the printer.
8 Card Stacker| used to load the ejected card. (Up to 150 prints)
9 ** Card Output| The printed card is ejected.
10 **** Filter Cover Heat

Button

| When replacing the dust filter, press and remove the filter cover when it is opened.
11 Filter cover| Used to hold filters so they don’t fall out
12 Fan| Heat is emitted from inside the printer to maintain the appropriate temperature.
13 Filter vents| Remove the heat discharged through the Fan outwards.
14 Top cover| Remove the card by opening the top cover in the event of a filter exchange and card singing.
15 Upper Cover Lock key| Use to lock and open the top cover.
16 Open Top Cover button| Press when you want to open the top cover.

computer with USB port which comply with ES1, PS2, and LPS.
3 USB sockets| It is used for USB communication with a memory stick or computer.
4 Ethernet ports| It is used when connecting to a network by connecting a LAN line.
5 RS232C Communication Device| It is used when connecting to a PC with a USB cable.
6 Power-connected ports| Connects to the power supply to supply power to the printer.
7 Filter cover| It is used to hold the filter so that filter does not come off.
8 Anti-theft device slot| It is used to attach a lock to the product for preventing theft.
9  Knob| If a card jam occurs during printing, turn it manually to remove the card.
10 Film Cartridges| It is used when installing a film. (Up to 1200 sheets of film can be installed)
11 Film recovery core knob| When installing the film, turn the knob to prevent sagging.
12 Film core knob| When installing the film, turn the knob to prevent sagging.
13 Cartridge Removable Button| It is used to remove the cartridge.
14 Ribbon Cartridges| it is used when installing a ribbon. (Up to 600 sheets of film can be installed)
15 Cartridge Removable Button| It is used to remove the cartridge attached to the printer.
16 Ribbon recovery core knob| when installing the ribbon turn the recovery core knob to prevent squashing
17 Ribbon core knob| when installing the ribbon turn ribbon core knob to prevent squashing
18 Card stacker and reject box| To prevent card theft, use the lock key to lock and open the card stacker and reject boxes.
19 Card reject box Cover| When you want to remove a card from the card reject box, open and close it.
20 Carrying handle| Prevents slipping when transporting the printer and helps convenient transport

Install Cleaning Roller

1. Hold the card Hopper and pull it in the direction of the arrow to remove it

2. Remove the existing cleaning roller by pulling it in the direction of the arrow.

Caution
When replacing the ribbon, it is recommended to replace the cleaning roller as well. (Provided with ribbon and cleaning roller)
If the cleaning roller is not replaced, it may cause fatal damage to print quality and important parts due to dust or contaminants.

3. Remove the cleaning roller installation guide as shown in the image below and discard the contaminated cleaning roller.

4. Install the new cleaning roller with installation guide as shown in the image below.

5. Remove protective tape to prevent fingerprint marks or contamination.

6. Align the cleaning roller with the ‘U-shaped holder’ on the mounting
   area’ and push it in the forward direction

7. With the cleaning roller installed, hold the cleaning roller protection tape with one hand and rotate the cleaning roller with the other hand to remove the protective tape.

Load Cards

remove the card static electricity

It is recommended to load cards in the manner shown in the image below to prevent card jams.

1. Hold the appropriate amount of cards and tilt them back and forth a  few times to separate them from each other.

2. Align cards and load cards inside the input hopper as shown in the image below.

Inserting cards with Input Hopper detached

3. Slightly press the side of the input hopper and lift it up.

4. Lift the CARD WEIGHT PRESS and fix it until it clicks

Caution:   – When the CARD WEIGHT PRESS is properly fixed, it is fixed on the top of the card hopper as shown in the image below.

5. Load the cards in the Input Hopper in the same way as in the image below.
   Caution:
   
   Make sure that the IC chip is facing the outside.
   If IC Cards are not placed correctly, then an error will occur.

6. Close the cover, and place the Input Hopper in the tray.

Note

Load the cards in the card hopper in the same way as in the image.
The hinge located in the input card hopper to prevent card separation. When the input card hopper is installed, the card is transferred to the printer with the ‘Hinge’ open. And when the input card hopper is removed, the ‘Hinge’ is automatically closed to prevent displacement.

Inserting cards with Input Hopper detached

1. Slightly press the side of the input hopper and lift it up.

2. Lift the CARD WEIGHT PRESS and fix it until it clicks
   Caution: When the CARD WEIGHT PRESS is properly fixed, it is fixed on the top of the card supply tray as shown in the below image.

Caution: When the CARD WEIGHT PRESS is properly fixed, it is fixed on the top of the card supply tray as shown in the below image.

3. Load the cards in the Input Hopper in the same way as in the image below.
   Caution: Make sure that the IC chip is facing the outside.

4. Close the card input hopper cover and when it is closed, the Card Weight Press automatically moves to the card loading position.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>