Skmei 1081, 1063 Watch Instruction & Manual
- June 7, 2024
- Skmei
Table of Contents
Skmei 1081, 1063 Watch Instruction & Manual
Skmei watch direct sales
A. Features:
-
Display Month ,Day Week Hour ,Minute ,Second ,
-
Display Two area time,
-
Daily Alarm and Chime hourly ,
1/100 second Chronograph with split functions -
EL backlight
B. Operational Manual
LIGHT: In any Mode Press LIGHT Key for LED light ON:
SET: In normal mode,Press SET key 2s to enter into set mode,”second”,”hour” and “minute” will Flash one by one .
MODE :{In set mode, Press MODE to adjust the function(+)(-) }
In normal mode, Press MODE key to convert display the function as following:
The time Setting:
In Normal Mode, press SET key 2s enter to set mode, the “Seconds” flashing, Press MODE(D) Key to zero.
- Press SET the “Hours” flashing. Press MODE to adjust “Hours” (Pay attention: A/P/H,”A” means “AM”, “P” means “PM”,“)
- Press SET the “Minutes” flashing. Press MODE to adjust “Minutes”.
- Press SET the 12/24H format flashing ,Press MODE to adjust Hours format 12H /24H.
- Press SET to exit.
Date Setting:
In Normal Mode, press MODE enter to date function display :
- Press SET key 2s “Month” flashing ,press MODE to adjust “Month”
- Press SET key the “Date” flashing ,press MODE to adjust “Date”
- Press SET key the “ Week”” flashing ,press MODE to adjust “Week”
- Press SET key exit.
Alarm & Chime ON/OFF Setting:
Alarm Setting:
In normal mode press MODE key twice to enter alarm mode ,
- Press SET key2s” Hour” flashing, Press MODE key to adjust hour. Pay attention to AM/PM
- Press SET key “Minute” flashing, Press MODE key to adjust minutes.
- Press SET key to exit.
Alarm & Chime ON/OFF
- In normal mode press MODE (D)key twice to enter alarm mode , press SET key 2S enter to set mode,press SET key three times ,The “ “and “ ”flashing ,press MODE key to ON/OFF the “ALM”/“CHI” function , Press B key to exit.
The second area time setting:
In Normal Mode, press MODE three times enter to the second area time display (you can see “DL” function word) :
- Press SET key 2s” Hour” flashing, Press MODE key to adjust hour. Pay attention to AM/PM
- Press SET key “Minute” flashing, Press MODE key to adjust minutes.
- Press SET key the 12/24H format flashing ,Press MODE key to adjust Hours format 12H /24H.
- Press SET key exit.
Chronograph functions
In normal mode: press MODE key four times key enter Chronograph mode, the “ST” function word comes out.
- Press SET key to Start running ;When running, If press SET key again will stop running, If press SET key
go on running ,,Press SET key again , will running again. Press SET key 2s to zero. Press MODE key exit.
Downloads
Skmei 1081, 1063 Watch Instruction & Manual – Download [Optimized PDF]
Skmei 1081, 1063 Watch Instruction & Manual – Download [Original PDF]