Audioengine A1 Home Music System W/ Bluetooth Aptx Manual

: June 7, 2024
: audioengine

Audioengine ONE User Manual

Audioengine

Premium Wireless Speaker System

Welcome to the Audioengine family and congratulations on your purchase of the Audioengine Al Wireless Music System!

Audioengine is dedicated to bringing you the highest-quality listening experience possible and the Audioengine Al wireless speakers were designed with the same attention to detail and operational simplicity as all our other products.

We wish to sincerely thank our customers and the entire Audioengine team for the inspiration to create yet another great product.

What’s in the box

Al powered (left) speaker
Al passive (right) speaker
AC power cable
Speaker wire
Mini-jack
audio cable
Quick start guide

Features

Built-in power amplifiers
High-fidelity Bluetooth@ aptX@ + extended wireless range
Aux audio input
Subwoofer output
Custom aramid fiber woofers and silk tweeters
Hand-built MDF wood cabinets

Safety Instructions

Please read these instructions before using this product
Keep these instructions for future reference
Heed all warnings on the product and in Misguide.
Follow W011.01.00.
Do not use this apparatus near water or moisture.
Clean only with o dry cloth and as directed by the manufacturer.
Do not block any ventilation opening& Install in accordance with the manufacturer’s instructions
Do not install near any heat sources such as radiators, heat registers, stoves another apparatus that produce heat.
Do not defeat, the safety purpose the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug hos two blades and a third grounding prong. The wider blade or third prong me prodded for your safety.
Protect the power cord from being walked on OF pinched. Particularly at Plugs, convenience receptacles, and the point where they from the apparatus.
Use only attachments or accessories specified by the manufacturer.
Use only with the cart, stead, tripod frock.. table specified by the manufacturer or sold with the apparatus. When a port is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning gams or when unused for long periods of time to prevent derange to this product.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus hos been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects hove fallen into the apparatus, the apparatus has been exposed to ram or moisture, does not operate norm*, or has been dropped. Operating Temperature Ranger 32 to 104 F (0 to 40 C).

Caution

Quick Start

Connect the included speaker wire horn the Al left (powered) speaker to the right (passive) speaker, observing proper wire polarity to each speaker connector.
Verify that the volume/power knob on the rear panel of the left speaker is in the OFF position by rotating the knob until it clicks off.
Connect the AC power cable to the Al leftspeaker rear panel and plug the other end of the cable into a functioning power outlet.

Wireless connection

Turn power on via the rear panel volume/power knob. Al will automatically go into Bluetooth “pair mode” and the Pair button on the rear panel will start flashing
On your device (phone, tablet, computer, etc) turn on Bluetooth and go to Bluetooth preferences.
Select “Audioengine ONE” to pair and connect_ The Pair indicator light on the Al rear panel should now be on solid.
Play your music and adjust volume levels for Al and your device.
To add additional devices put Al back into pair mode by disconnecting Al from your device or by pressing the Pair button on the Al rear panel for about 3 seconds until the pair indicator light starts flashing. Repeat steps 2 & 3 to connect another device. Al wirelessly connects to one device at a time, however it will pair and remember up to six different devices.

Wired Connection

Connect an audio cable between your device and the input on the Al rear panel.
Play music and adjust the volume on the speakers and your device to your desired listening levels.

Inputs and volume settings

Multiple devices may be connected to the speakers at the same time and the wireless and aux inputs are open and active, so its easy to switch between your phone, tablet, computer, “IV, etc.

To adjust the volume, we recommend you first set a level on Al and then use the volume control on your device to adjust the overall level. Volume settings are flexible and there is no right or wrongs° feel free to experiment to find what works foryou.

Subwoofer output

The Al Speakers include a sub output so you can connect a subwoofer. This output is adjustable so the volume level of your subwoofer can be set from the Al volume control.

For specifications and other product into go to: audicengine.com

Contact support

If you have any questions please contact our customer support team: support@audioengineusa.com

Break-in period

Your speakers will sound great out of the box and will get better over time. No need to do anything else but listen to them, however, we do recommend that you give them at least 40 to 50 hours break-in time before doing any critical listening.

Cleaning

We don’t recommend using any solvents or cleaners. Just wipe down the cabinets with a soft, dry cloth.

Speaker Placement

Although Audioengine speakers are very forgiving with regards to where you place them, it’s true that proper speaker location can have an impact on sound quality. Even though there are different theories on correct speaker placement, rooms and tastes are different so it’s difficult to recommend a perfect setup. We do suggest you feel free to experiment to see what works for you.

Asa general rule of thumb for the best soundstage and imaging, tweeters should be at about eye-level in your most frequent listening location.

Here are a few mom suggestions, assuming you have some flexibility regarding placement. No need for concern if your listening space dictates the speakers position.

Both speakers should be equal distance from your primary listening position. Placing the speakers at least 45 feet apart usually provides the best imaging and soundstage.

If you need to turn the speakers on their sides, position the tweeters toward the outside.

If used on a desktop for computer or multimedia speakers, the more solid the surface, the better your speakers will sound!

A1 Panel

Warranty Information

All Audioengine products have a 3-year Limited Warranty on parts and labor from date of purchase. The Limited Warranty applies only to Audioengine products purchased in the United States. Your warranty is automatic, so there is no need to register. For Limited Warranty coverage elsewhere, please contact the Audioengine dealer, reseller, or distributor in your country or region.

What is covered

All defective parts or faulty workmanship.

What is not covered

The Audioengine Limited Warranty does not cover damage caused by accident, misuse, abuse, neglect, excessive moisture, lightning, power surges, other acts of nature, unauthorized product modification or repairs, or failure to follow the instructions outlined in this guide.

What we will do

We will repair or replace any defective parts, at our option, within a reasonable amount of time and free of charge anytime during the warranty period. After service, we will be responsible for shipping the product back to you at our expense.

What we ask from you

You will be responsible for shipping charges to Audioengine or to an authorized dealer. We recommend you keep the original shipping materials to prevent shipping damage if service is needed. Audioengine cannot be responsible for any damages incurred during shipping due to poor packing, so please pack well and male sleet° insure your shipment.

How to Obtain Audioengine Warranty Service

If you have any questions or feel you may need service, contact the reseller where you purchased your product. You can also visit our support portal at support where you will find a searchable Knowledge Base. And if you don’t find an answer to your question you can easily contact us by opening a support ticket.

We will do everything we can to answer your questions and resolve any issues as quickly as possible.

Exclusive remedy

This Limited Warranty is fully transferable provided the current owner furnishes the proof of purchase and that the serial number on the product is intact. THE MAXIMUM LIABILITY OF AUDIOENGINE SHALL NOT EXCEED TH E ACTUAL PURCHASE PRICE PAID BAYOU FOR THE PRODUCT. IN NO EVENT SHALL AUDIOENGINE BE LIABLE FOR SPECIAL INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES.

Product returns and refunds

We sincerely hope you get as much enjoyment from our products as we’ve had treating them. However, should you have an Issue or are not satisfied with any Audioengine product for any reason contact the reseller where you purchased or contact us directly: support ®audioenOneusa.com

About Audioengine

Audioengine designs and builds Innovative audio products with all your music In mind. Great sound, simple but elegant designs, high-quality materials and truly useful features are what Audioengine is about. We sincerely hope you get as much enjoyment from our products as we’ve had creating them!

FCC Part 15 Notice

This device complies with part 15 of the FCC Rules. operation is subject to the following two conditions:

This device may riot cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible far compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class 13 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaran-tee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which con be determined by turning the equipment off and an, the user is encouraged to try to correct the interference byone or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver
Connect the equipment into an outlet an a circuit different from that to which the receiver is connected. – Consult the dealer man experienced technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth far an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Information for Users on Disposal of Old Equipment [European Union]

This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life Instead, the product should be handed over to the applicable collection point for the recycling in accordance with your national legislation.

By disposing of this product correctly, you will help to conserve the environment and human health that could otherwise be caused by inappropriate waste handling of this product. For more information about collection point and recycling of this product, please contact your household waste disposal service or the shop where you purchased the product. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

[Other Countries outside the European Union]

If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment.

Audioengine

Home Music System

© 2020 Audioengine, LLC. All Rights Reserved.

Audioengine and Audioengine Al are trademarks of Audioengine. The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth Sib, Inc. and are used by Audioengine under license.

The apt(. mark and logos are registered trademarks of Qualcomm Technologies International, Ltd.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

A1 Quick Setup

Step 1: Connect the included speaker wire from the A1 left (powered) speaker to the right (passive) speaker, observing proper polarity to each speaker connector.

Step 2: Verify that the volume/power knob on the rear panel of the left speaker is in the OFF position by rotating the knob until it clicks off..

Step 3: Connect the cable from the external power supply to the A1 left speaker rear panel.

Step 4: Connect the Ac power cord to the A1 left speaker rear panel and plug the other end of the cable into a functioning power outlet.

Wireless Connection

Step 1: Turn power on via the rear panel volume/power knob.
A1 will automatically go into Bluetooth “pair mode” and the Pair button on the rear panel will start flashing. Step 2: : On your device (phone, tablet, computer, etc), turn on Bluetooth and go to Bluetooth preferences. Step 3: Select “Audioengine ONE” to pair and connect. The Pair indicator on the A1 rear panel should be solid.

Step 4: Play your music and adjust volume levels on A1 and your device.

Step 5: To add additional devices put A1 back into pair mode by disconnecting A1 from your device or by pressing and holding the Pair button on the A1 rear panel until the pair indicator starts flashing. Repeat steps 2 & 3 to connect another device.

A1 can wirelessly connect to only one device at a time, however it will pair with and remember up to 6 different devices.

Wired Connection

Step 1: Connect an audio cable between your device and the input on the A1 rear panel.

Step 2: Play your music and adjust the volume on the speakers and your device to the desired listening levels.

A1 Troubleshooting Tips

The following troubleshooting tips can help diagnose and correct most concerns with the A1. We have attempted to make this list as comprehensive as possible, so some of these may not apply to your issue, but please go through each tip.

If the power indicator on the A1 is not illuminated, try these tips:

Make sure the AC power cord is connected to the power supply unit and to a working AC power outlet.
Check that the cable at the other end of the power supply is correctly connected to the rear panel of the left speaker.

If the power supply light is on but you are experiencing an audio-related issue with a wired connection, try these tips:

Verify that the volume/power control on the rear panel is not turned all the way down or powered off (we recommend setting the volume to at least the 10 o’clock position)
Check that the volume level of your audio source components or devices is not set to minimum volume or powered off.
Check speaker wire connections from the left (powered) speaker to the right (passive) speaker. Confirm this by removing the speaker wire from on each speaker and reconnecting. Also check the speaker wire polarity by verifying that the wires are going to same terminals on both speakers.
Check that the cable from your audio source to the speakers are properly connected. Confirm this by unplugging the audio cable and then reconnecting.
Decrease the volume of the input audio source and increase the volume of the speakers.
Try using different audio input sources and/or devices to see if the problem follows.
If you are using a computer with your A1, make sure the volume is up on your media players, internet radio, master control, device volume, etc. and the balance control is centered.

If your input source has its own EQ, please make sure the low end is at a moderate level, as having too much bass can cause distortion.

If you are using a wireless adapter, preamp, or external DAC with these speakers, remove them (temporarily) and connect the audio input source directly to the speakers.
Move your speakers to a different location to see if something is causing interference in the current setup. Something as simple as a wireless internet router, cordless or mobile phone, or halogen lamp near the speakers can cause interference.

A1 troubleshooting tips – Bluetooth

Verify that the A1 is connected to power and that the front volume knob is turned clockwise past the detent position (you should feel a click). If you haven’t already, power-cycle your speakers by switching them off and back on.
If your A1 is already connected to a device via Bluetooth, the Bluetooth pair light on the back panel of the left speaker will be on and solid (note that if your A1 has been idle and not connected to a device for more than 2 minutes, the Pair light will automatically turn off). Tap the Pair button and it should begin blinking (or pair to your A1 using your source device, and the LED will go from off to on and solid).
Try playing audio from more than one application on your phone/tablet, or computer.
Check to make sure your source device (computer, tablet, phone, etc) is running the most up-to-date version of software available. For Mac OS users, be sure to check the App store to see if there’s a newer version of Mac OS you could be running.
Try disconnecting from and forgetting the A1 through your device’s Bluetooth settings, and re-pairing to the A1.
Try using a different source device with your A1 to see if the issue follows. Also be sure to test your A1 using the analog input as well.
If possible, try your A1 in a different location to see if something is causing an issue in the current setup. Something as simple as a wireless internet router, cordless or mobile phone, or halogen lamp near the speakers may be causing interference in your setup.

Downloads

Audioengine A1 Home Music System W/ Bluetooth Aptx User Manual – Download