FlowerHouse Pumpkin Chair Instruction Manual

June 7, 2024
FlowerHouse

FlowerHouse Pumpkin Chair

a piece of luggage

Assembly Instructions

  1. Open the package and unwrap the four short legs and put rubber feet on each of the four legs (if not already attached).
    a hand holding an object in his hand

  2. Connect the four legs to the X-frame on the lower bow of the Pumpkin Chair Stand using the 4 shorter nuts and bolts
    a close up of a device

  3. Attach upper bow to lower bow to make C- frame, attach using 2 longest nuts and bolts.

  4. Open Pumpkin Chair Frame completely and put the four smallest nuts and bolts in place.
    a hand holding an object in his hand
    Make sure the flat tops are on the inside of the chair, so they do not poke through the fabric or through the seat

  5. Take the center loop and slide through top flap opening.

    Proceed to close top and bottom flaps by connecting hooks to eyelets.

  6. One at a time, slide the O-rings of the side straps over the center attachment strap.

  7. Pull the center strap taut through the stacked O-rings.
    diagram

  8. Lift the chair and slide the attachment strap over the end cap into the securing tabs.
    Place flat cushion in chair, followed by large over-stuffed cushion.

  9. Make sure all nuts and bolts are tightened throughout the stand and chair. Place in any level location and enjoy your Pumpkin Chair!
    a piece of luggage

Thank you for your business!

PATENTS:
www.flowerhouses.com/patent

  • PO Box 595 Clio, Michigan 48458
  • Office: (810)-686-8252
  • Fax: (810)-686-5492
  • customerservice@flowerhouses.com

logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals