BOBBLEHEADS FLAVOUR BLASTER Mini User Manual
- June 3, 2024
- BOBBLEHEADS
Table of Contents
USER MANUAL
FLAVOUR BLASTER Mini
CONGRATULATIONS
CONGRATULATIONS ON YOUR PURCHASE OF THIS FLAVOUR BLASTER MINI!
FOR THE BEST EXPERIENCE PLEASE CAREFULLY READ AND FOLLOW THIS USER MANUAL.
For the latest information and to be part of a great and growing community
please join our Bubble Heads Club:
https://www.flavourblaster.com/account/register
https://www.flavourblaster.com/account/register
WARNING
PLEASE READ THIS SECTION CAREFULLY TO ENSURE YOU RECEIVE MAXIMUM BENEFITS FROM YOUR FLAVOUR BLASTER MINI AND ENJOY THE PRODUCT IN THE MOST SAFE EFFECTIVE WAY:
-
This Flavour Blaster is designed to be used with Flavour Blaster Aroma’s and Bubble X only. It is not designed to be used with any e-liquids or loose tobacco leaf or herbal substances !
-
This product is only intended for use by adults (18+) and should not be used by children, women who are pregnant or breastfeeding, or persons with or at risk of heart disease, high blood pressure, diabetes or taking medicine for depression or asthma, or who otherwise may be sensitive to Aroma’s. l.e. toxic by inhalation, in contact with the skin or eyes, or if swallowed. Ingestion of the non-vaporized concentrated Aroma ingredients can be poisonous.
Keep away from children and pets. -
The Flavour Blaster has not been evaluated by the FDA and is not intended to be a smoking device or treat, mitigate, prevent or cure any disease or condition.
-
The Tank must be stored out of the reach of children and pets. All spare and used Tanks must also be disposed of properly and out the reach of children and pets.
-
The Flavour Blaster includes small parts such as the Tank. Always keep any small parts out of reach of children and pets to prevent swallowing or other harm.
-
Do not misuse, mishandle or store your Flavour Blaster improperly. Even though it is made of durable plastic and metal it may become damaged when dropped or otherwise mishandled.
-
Do not attempt to repair the unit by yourself as damage or personal injury may occur.
-
In order to guarantee the normal functioning of your Flavour Blaster we strongly advise that you charge the battery when the power level drops below 10%.
-
In order to prolong the operation of your Flavour Blaster, please do not place or store in excessively hot or cold environments. Keep away from sources of excessive heat as damages may occur.
-
Obey local laws or regulations regarding Electronic Cigarettes when producing Aroma Clouds. If you are in an area where there are any bans or potential dangers, please do not use your Flavour Blaster.
-
Your Flavour Blaster is not waterproof, please keep it dry at all times, especially the USB Port.
-
Do not allow any Aroma, Bubble X, or liquid to enter the device through the USB port. If any liquids enter the device, or come into contact with internal components, please discontinue using or charging the device and contact JetChill immediately.
-
Do not drop, throw, mishandle your Flavour Blaster as the Casing or inner components may become damaged.
-
JetChill is not responsible for battery and charger explosions, or malfunctions, due to the use of a low-quality charger.
Only use the original Flavour Blaster USB-C Cable to charge your Flavour Blaster. We strongly recommend that you always use a high quality USB wall charger (CE & UL Certified). The Flavour Blaster is not designed for use with a car charger and the Kit does not include a car charger. -
JetChill is not responsible for any tank or battery damage due to the use of e-liquid or dry herb.
-
Do not ingest Aroma direct from the Bottle. In case of Aroma contact with skin, wash immediately and thoroughly with soap and water. In case of contact with eyes, rinse immediately and thoroughly with water and seek full medical advice immediately. In case of an accident, or if you feel unwell, seek full medical advice.
-
Do not ingest Bubble X direct from the bottle. If swallowed, rinse mouth immediately with plenty of water and drink a glass of water. Do not induce vomiting. Rinse off the skin and eyes immediately should the liquid come into contact with them.
CONTENTS
1x Mini Flavour Blaster
1x USB-C Cable
2x Disposable Tank
2x Aroma
1x Bubble X (60ml)
1x Bubble X Bowl
1x Atomiser
QUICK START
|
---|---
1. CHARGE BLASTER
Insert Micro Mag USB-C Cable| 2. PRIME COIL & FILL TANK
Pour Aroma into Tank
|
3. INSERT TANK
Insert Tank & add Nozzle| 4. TURN ON
Press Trigger 3 times
|
5. DIP NOZZLE TIP
Into Bubble X Jigger| 6. HOLD TRIGGER
Creates Aroma Filled Bubbles
BATTERY
To charge your Flavour Blaster Battery connect the correctly powered USB-C
Cable to the USB-C Input Port. The Screen will show the Battery charge %. A
full battery charge will take 4 hours with a 1 AMPS charger, giving the
Flavour Blaster 8 hours of usage time.
PLEASE READ AND ADHERE TO THE FOLLOWING WARNINGS WHEN CHARGING YOUR DEVICE:
– Only charge the Flavour Blaster with a high quality CE & UL Certified 1 AMP
wall charger.
– Never charge a Battery that has been damaged or dropped.
– Never plug a Charger into a non-approved Mains Power Transformer.
– Do not overcharge, remove the USB-C Cable from the Flavour Blaster when
complete to prolong battery life.
– Remove Tank before charging.
– Never leave a charging battery unattended.
– Only use the included high quality USB-C Charging Cable.
– Do not charge your Flavour Blaster in your car.
– Remove the Tank from the Flavour Blaster when shipping or travelling.
– If there are any issues with the device please contact JetChill immediately.
LED INDICATOR
|
---|---
Flash 5 times
Power on/off| Flash 5 times
Tank detected
|
Flash 3 times
Tank temperature too high| Flash 3 times
Tank not detected
|
Flash 3 times
Tank resistance lower than 0.05Ω| Flash 3 times
Overuse
| Solid light
Battery too low
BATTERY
|
---|---
100% power| 70% power
|
40% power| 10% power
| Less than 10% power
LED Indicator will go into battery saving mode after 60 seconds meaning all
lights will go out.
Press trigger once to wake Blaster up.
FILL DISPOSABLE TANK
|
---|---
1. OPEN FLAP
Pull Outer Hole Flap open| 2. FILL TANK
Pour Aroma into Outer (Not Inner) Hole
|
3. FILL LINE
Fill to Max then rest for 2 minutes| 4. CONNECT TANK
Connect to Mag Base
|
5. REPLACE TANK
Every 8 weeks
Or once Aroma Cloud smells burnt| 6. CLEANING
Clean Base with alcohol wipe
LIQUIDS
|
---|---
1. STORE UPRIGHT
Handle with care around liquids| 2. ONLY DIP NOZZLE END
Don’t dip whole Nozzle into Bubble X
|
3. DON’T TIP BACKWARDS
To prevent Bubble X leaking into Blaster| 4. NO BUBBLE X IN TANK
To prevent Tank damage and leaking
|
5. CLEANING
Clean with alcohol wipe after use| 6. REMOVE TANK
When not in use to prevent leaking
ATOMISER
Dry bar environments can sometimes be a challenge for the bubble.
To improve it`s stability, we recommend using the Atomiser.
|
---|---
1. TWIST OPEN
Twist upper half of Atomiser to open| 2. REMOVE INNER BOTTLE
Remove inner tube from Atomiser outer casing
|
3. FILL WITH WATER
Unscrew lid and fill clear container with water Screw lid back on and place
into outer casing| 4. SPRAY OVER DRINK/GLASS
Increase bubble success rate by spraying cocktails/glassware 1/2 x with water
|
5. SPRAY OVER BUBBLE
Spray over bubble to further increase stability| 6. TWIST CLOSED
Twist upper half in the opposite direction to close when not in use
CLEAR BUBBLE
|
---|---
1. PRESS TRIGGER TWICE| 2. LED INDICATOR WILL FLASH
|
2. DIP NOZZLE IN BUBBLE X| 3. PULL TRIGGER
| 4. PRESS TRIGGER TWICE
To produce Aroma again
BUBBLE X
Create bubbles filled with aromatics, fill cloches with aromatic clouds, make
your own aromatic clouds for cocktail & drinks, add theatrical clouds for
desserts, and much more.
|
---|---
1. Bubble mixture should be shaken gently prior to use or every 24 hours| 2.
Bubbles can be created on both wet and dry rims. You can create a wet rim by
rinsing the glass or by using a fine mist spray bottle like an atomiser.
Sometimes bubbles are fragile so it’s always best to prepare the glass for the
best chance of achieving the perfect bubble.
|
3. Carbonated drinks can occasionally pop your bubble as gas bubbles hit the
rim of the glass, breaking the surface tension. Always leave a 2cm to 3cm gap
between top of drink and rim. Note if alcohol is strong or neat, the bubble is
harder to form, as the alcohol will evaporate the water in the film of the
bubble.| 4. Sharp glass edges, shaped glassware, plastic rim and drinks
containing ice will be very difficult to form a bubble upon. We recommend using
glassware with soft rolled edges.
|
5. Glassware must be clean and washed correctly. Residue detergent from a
glass washer may compromise the forming of the bubble.| 6. Always try and
keep the bubble mixture at 18c room temperature. If it gets too warm it can
make it harder to form bubbles!
BUBBLE QUANTITIES
- 60ml bottle of Bubble X makes up to 350 bubbles.
- 10ml bottle of Aroma makes 250 aroma clouds.
SAFETY
ALWAYS STORE THE FLAVOUR BLASTER IN AN UPRIGHT POSITION: THIS WILL PREVENT ANY
LIQUIDS ENTERING INSIDE THE CASING.
POWERING THE FLAVOUR BLASTER ON & OFF:
Press the Trigger three times in quick succession to turn on the Flavour
Blaster. Press the Trigger three times in quick succession to turn off the
Flavour Blaster. Always power off the Flavour Blaster when it is not being
used and remove the Tank.
8 SECOND CUT OFF:
If Trigger is pressed for 8 seconds Flavour Blaster will stop firing until
Trigger is released and pressed again.
TANK:
Do not pour alcohol into tank, this can cause fire. Tank /Coil will get hot
during use so ensure Tank is allowed to cool down before removing Tank from
Blaster.
SHIPPING & TRAVELLING:
Remove Tank when shipping or traveling to prevent Tank activating if Flavour
Blaster inadvertently turns on. Follow rules regarding shipping or traveling
with a device with 2 permanently installed Lithium Ion Batteries. The
Batteries are not removable or loose in the device.
SHORT CIRCUIT PROTECTION:
Short Circuit Protection prevents the Flavour Blaster against short circuiting
and will stop the unit from functioning in unsafe conditions. The Flavour
Blaster features automatic real-time Tank Ohms detection.
OVER CHARGE PROTECTION:
Flavour Blaster monitors the battery voltage and will automatically power off
when the battery is over charged.
TECHNICAL SPECIFICATIONS
Battery (Lithium Ion): | 2,500 mAh, 3.6 V (INR18650–30Q ) |
---|---|
Output Power: | 15 W |
Output Voltage: | 2.99–3.7 V |
Output Current (continuous): | 4.0-7.0 A |
Atomizer Resistance (cold): | 0.1–1.2 Ohm |
Temperature Limit: | 200–600 oF |
Input Voltage (unloaded): | 2.2–4.1 V |
Input Current: | 8.0–10.0 A |
Quiescent Current: | <50 mA |
Power Down Current: | 32-106 uA |
Efficiency: | 90% |
WARRANTY INFORMATION
JetChill provides a 12 month warranty on parts and labour for the Flavour
Blaster.
Please consult www.flavourblaster.com
for full terms and conditions.
For warranty assessment the Flavour Blaster needs to be returned to the
factory.
Empty Tank before shipping and ensure Tank is not connected to the Mag Base.
JetChill Ltd
Print Centre Fulwell Road
Roker
Sunderland
UK
SR6 0HR
www.flavourblaster.com
www.jetchill.com
info@jetchill.com
(uk): 00 44 (0) 208 1243014
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>