LifeFitness Universal Tablet Tray and Handlebar Bracket Installation Guide
- June 7, 2024
- LifeFitness
Table of Contents
LifeFitness Universal Tablet Tray and Handlebar Bracket Installation
Guide
|
VI-BYOD-01 Installation
---|---
Release Date: 08.05.2020| Models Affected:
VI-BYOD-01| Service Document
Prepared by: Oliver Duke SD- 86
Prepared by: Oliver Duke| |
☒ Assembly instructions| ☐ Installer Alert| ☐ Parts Manual
---|---|---
☐ Service Bulletin| ☐ Service Manual| ☐ Software
☐ Product information| ☐ Trouble Shooting|
Part number| Description
---|---
VI-BYOD-01| Universal tablet tray and handlebar bracket for IC567
Required tools: 2.5mm & 3mm Allen key
| VI-BYOD-01 Installation
---|---
Release Date: 08.05.2020| Models Affected:
VI-BYOD-01| Service Document
SD- 86
Prepared by: Oliver Duke
-
Remove the bolt and both spacers between the handlebar and console with a 3 mm Allen key.
-
Remove the bolt from the BYOD bracket with a 2.5mm Allen key. The bolt will be used to fix the bracket to the handlebar at a later point.
-
Carefully slide the bracket on the handlebar.
-
The BYOD bracket will fit snuggly on the handle bar and over the console as depicted below
| VI- BYOD-01 Installation
---|---
Release Date: 08.05.2020| Models Affected:
VI-BYOD-01| Service Document
SD- 86
Prepared by: Oliver Duke -
Hand tighten the bracket using the removed bolt from step 2 with a 2.5mm Allen key.
Assembly completed