HEASN Automatic Hot Stamping & Die-cutting Machine User Manual

HEASN Automatic Hot Stamping & Die-cutting Machine

Product name:
SH-1060SEF Automatic Hot Stamping & Die-cutting Machine

Main technical parameters: SH-1060SEF

Excellent features assure perfect quality
Non-stop Offset feeder
Non-stop-feeding with pre-loading platform for high-speed efficient production. Strong 4 lifting & 4 forwarding suction heads can feed various substrates smoothly, up to B-flute corrugated board.
BECKER vacuum pump
German brand BECKER oil-less vacuum pump delivers quiet, cool operation and long vane life.
Feeding table

• A double sheet detector and front lay register device can calibrate the sheet feeding.
• Push and pull 2-in-1 side lay can handle different stocks.
• Driven-type brush wheels with wide Nitta belt for smooth conveying of various substrates, even the curved corrugated board.
• The slow-down device on the feed table ensures precise sheet feeding, especially for thin paper.

Die-cutting section

• The segment gear indexing mechanism provides smooth and accurate sheets running.
• State-of-the-art drive mechanism with a heavy-duty structure for steady and high precision worktable movement.
• Cutting pressure can be fast setting and recording by touch screen, with max. ability to 300tons.
• Pneumatic chase lock makes operation much easier.
• Various stock cutting range from light paper to B-flute.

Hot stamping section

• 16 heating zones with individual
  temperature control on the touchscreen.

• Honeycomb plate adopts high heatproof material through specific processing with optimized hole layout.

• Equipped with an air blasting bar to separate foil and sheets, blasting volume and air pressure are adjustable.

Foil advancing

• 3 Longitudinal and 2 Transversal foil feeding shafts are equipped to meet the demand for different products.
• The Longitudinal foil unwinding roller can be pulled out for quick installation of foil roll.
• 45°angle guide bar and foil leading device delivery out the waste foil to collection box by the brush wheel.
• Foil run-out alarm function, need to replace foil in advance when there is an alarm.

Hot stamping control station

• You can set the foil stepping program by the touch screen.
• The foil step is controlled by an imported brand servo motor.
• The sample desk with perfect illumination for qualified stamping results checking.

Non-stop delivery

• The brush push down device and
  jogger device at the delivery section ensures proper stacking

• The belt table will switch on for nonstop delivery production.

• A pneumatic sampling device allows the operator to check the finished product easily without stop the machine from running.

Pressure & lubrication

• Worm, worm gear, crankshaft with unique processing greatly improved the life of core components.
• Japanese imported brand single-point clutch make feeder and the main machine can be separated or synchronized combined at any time which simplifies the operation.
• Italian pneumatic clutch brake system to ensure stable brake and minimum attack on the machine.
• An automatic pump cooling circulation system ensures the main die-cutting section with constant lubrication at high speed running.

Gripper system

• TAN TZU brand precision intermittent divider with gear drive box for high precise gripper bar position control.
• 7pcs imported gripper bar, 10pcs grippers on each bar.
• Single gripper bar can be front and back adjusted to meet the precision requests.
• All gripper bars are made of light, low inertia, rigid, and super-hard high-quality anodized aluminum alloy profiles.
• The transmission chains of the gripper bar are pre-pull treatment to ensure strong durability and no deformation.

Intelligent electric control system

• SCHNEIDER and TOSHIBA frequency converter, SCHNEIDER servo motor for foil shaft control, PANASONIC PLC and sensor, MOELLER(EATON) switch button, circuit-breaker, and contactor.
• ABB brand motor for main machine transmission, MAC Electromagnetic valve.
• The colorful man-machine interface can present a whole machine running situation. The troubleshooting manual provided on the touch screen helps fast solution for the errors.

Factory gallery

Documents / Resources

| HEASN Automatic Hot Stamping & Die-cutting Machine [pdf] User Manual
Automatic Hot Stamping Die-cutting Machine, SH-1060SEF A
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>