Angel City Smart Wristband Heart Rate Monitor and Blood Pressure Monitor User Manual
- June 3, 2024
- Angel City
Table of Contents
Heart Rate Monitor and Blood Pressure Monitor
User Manual
Wear it properly
The wristband is best worn after the ulnar styloid Adjust the size of the
wrist according to the adjustment hole: Buckle belt buckle. The sensor should
be close to the skin to avoid moving.
Charge the bracelet
For the first time, make sure that the battery is in normal pow er. If the pow
er is not turned on normally, please connect the charger to charge the device,
and the bracelet will automatically turn on.
Install the bracelet app on your phone
Scan the QR code or go to the App Store, app do waload and Install the app
https://fitpro.jusonsmart.com/public/fitpro_download.html
System Requirements: Android 3.0 or above: i0S9.0 or above:Support for Blum/Kl. 4.0.
Device connection
For the first time. you need to connect to the APP for calibration. After the connection is successful, the bracelet will automatically synchronize the time.
- Open the phone app—.click to start scanning—.click onthe device connection
- After the pairing is successful. the APP will automatically save the Bluetooth address of the bracelet. and when the APP is opened or running in the background. it will automatically search and connect the bracelet:
- Android mobile phone Please ensure that the APP runs in the background and the mobile phone system settings are given all permissions such as running the background and reading the contact information.
Bracelet function description
- When the device is turned off, touch and hold the function button for more than 3 seconds to turn the device on
- In the Bluetooth address interface of the bracelet, press and hold the 2 second wristswitch to turn off the phone. Short press will exit the shutdown page
- Bracelet reset device This function will clear all data of the bracelet (such as stepcounting)
- Under the power on state. touch the short press function key to light up the screen
- Whether the default clock page of the bracelet, press the short press function key to switch to view different pages. no operation default five-second screen to the heart rate three-in-one interface to start the test. bean rate.
- Switch Cf three-in-one interface 60s timeout automatically off screen (heart rate and blood pressure need bracelet hardware support)
Clock Interface
After syncing with the phone. the bracelet will automatically calibrate the
time.: Press and hold the standby interface for 2 seconds to switch the clock
interface of 24/12 hours. ( tracks Step ) Number of steps Wear the bracelet
and record the number of daily movement steps to view the current real-time
steps.
Distance
The distance of motion is estimated based on the number of walking steps.
Calorie
Estimate the ealories burned based on the number of walking steps Heart rate,
blood pressure, blood oxygen three- in-one After entering the heart rate
three-in-one test interface for a few seconds, the current heart rate, blood
pressure, and blood oxygen test results are displayed. This feature requires a
wristband to support heart rate and blood pressure sensors
Multi-sport mode
(Running Mode)
Under this interface, you can record the calories and duration of running.
(Skipping rope mode)
Under this interface, you can record the calories and duration of rope
skipping. (Sit-up mode ) Under this interface, you can record the calories and
duration of sit-ups.
( Sleep mode )
When you fall asleep, the bracelet will automatically enter the sleep
monitoring mode: Automatically detect your deep sleep/shallow sleep/wake up
all night and calculate your sleep quality: Sleep data is only supported for
APP viewing.
Note: Wearing a bracelet to sleep will have sleep data and start to
detect sleep at 10 o’clock in the evening. Sleeping 314 hours of sleep data
will be synchronized to the APP while sleeping
Information mode
When the bracelet pushes multiple reminder messages, enter this interface to
view the last 3 message records.
APP function and settings
Personal information:
Please set your personal information after entering the app. Settings Personal
Information, you can set gender – age – height -weight.
You can also set your daily goal steps to monitor daily completions
(Application push)
incoming, call: In the connected state, if the call alert funetion is
enabled, when the call comes in, the wristband will vibrate and display the
name or number of the caller.(You need to give APP read address book
permission)
SMS notification: In the connected state, if the SMS reminder function is
enabled, the bracelet will vibrate when there is a text message.
Other reminders: In the connected state, if this function is enabled,
when there is a message such as WeChat, QQ, Facebook, ete., the bracelet will
vibrate to remind and display the content received by the app.(You can also
view the last three message records in the ring information menu).(You need to
give the APP permission to get system’ notifications. The wristband can
display 20-40 words).
Other funections : Turn on vibration to set this funetion, When there is
a call, message or other reminder, the bracelet will vibrate. if it is closed,
the bracelet will only have a screen reminder without shaking to avoid
disturbing.
Tips for Android users: When using the reminder funetion, you need to set
it to allow “FitPro” to run in the background; it is recommended to add
“FitPro” to the rights management and open all permissions. (Alarm setting)
In the connected state, 8 alarms can be set. After setting, it will be
synchronized to the bracelet; offline alarm is supported, After the
synchronization is successful, even if the APP is not connected, the bracelet
will be reminded according to the set time,
(Looking for a bracelet)
In the connected state, click the “Look for the bracelet” option and the
bracelet will vibrate.
(Remote photography)
In the connected state, start the photo from the wristband or the APP to enter
the remote camera interface, shake/turn the wrist/touch the bracelet, and
automatically take a photo after 3 seconds of counting down. Please allow the
APP to access the photo album to save the self-portrait photo. (Sedentary
reminder)
Set whether to enable the sedentary reminder function, you can set the
reminder interval, ifyou sit for a long time in the set time, the bracelet
will remind.
(Raise your hand to brighten)
Turn this function on. When the wristband is in the state of the screen,
lift your wrist and turn the screen to yourselfto light up the screen.
(Do not disturb mode)
Turn on the Do Not Disturb mode. You can set the Do not disturb time
period. During the set time period, the bracelet stops receiving notification
messages to avoid reminding messages.
(Device reset) Setting this feature reset will erase all data in the
bracelet (such as step counting)
(Remove device)
Remove device This feature will erase data and remove device
Basic pa rameters
Equipment type | smart wristband | 111 ypeof battery | Lithium polymer |
---|---|---|---|
Vibration motor | support | tillittiod of synchronization | 13 I uetooth4.0 |
Operating temperature | -10°C-50 °C | sensor | Low Power Acceleration Sensor |
System Requirements | i0S9.0 and above/Android 5.0 and above |
Precautions
- Bathing and swimming should not be worn.
- Please Connect the bracelet when synchronizing data.
- Use the included charging cable to charge.
- Do not expose the bracelet to high moisture, high temperature, or very love temperatures for long periods of time
- The bracelet appears to crash and restart. Please Check the phone memory information clear and try again, or exit the APP and reopen it.
Component introduction
Host Wrist strap Charging cable Packing box and instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>