momo Designs Dual Automatic Watch Winder and Storage Box User Manual

June 7, 2024
momo Designs

Dual Automatic Watch Winder and Storage Box
User Manual
KAWATCHWINA

Thank you for buying this product, designed to keep your watches in top condition and always wound up, ensuring many years of use.
Please take a few moments to read through these instructions to ensure proper operation, and keep a copy for future reference.

momo Designs Dual Automatic Watch

Product Specifications

Power AC 100-240V, 50/60Hz
Features Winds clockwise or anti-clockwise
Temperature Operate between -19C and 45C
Accessories AC Adapter

NOTE: Please use the AC adapter supplied with the product. Remove the adapter when the winder is not in use. Always turn off the power when inserting or removing watches.

Attention

Please handle this product with care and inspect it regularly to ensure it is in good working order.

If the product, power supply cord, or plug shows any signs of damage: stop use, unplug, and contact Kogan.com support.


OPERATION
Insert the adaptor into the socket located on the product and plug it into an electrical outlet.
1 – Rotation Mode
Mode 1: Operation ON/OFF
Mode 2: Turn clockwise. Rotate for 2 minutes and rest for 6 minutes then repeat.
Mode 3: Turn counter-clockwise. Rotate for 2 minutes, then rest for 6 minutes, then repeat.
Mode 4: Turn both clockwise and counter-clockwise. Rotate for 2 minutes in one direction, then rest for 6 minutes. Rotate for 2 minutes in the opposite direction and then rest for 6 minutes. Repeats above cycle.
Mode 5: Turn both clockwise and counter-clockwise. Rotate for 5 minutes in one direction and then rotates in the opposite direction for 5 minutes. Repeats continuously for 3 hours, then rests for 9 hours. After the 9 hours, it will begin the above cycle again.

2 – Door Sensor
Some watch winders have this function. When the function is turned on, opening the cover will stop the motor from working (so you can change the watch). When you close the cover again, the motor will continue to work.

NOTE: Most watches on the market require clockwise winding. Some brands may require counter-clockwise winding or even alternating rotation. Please consult with your watch manufacturer or watch manual for further information.

ATTENTION

  • When inserting and removing a wristwatch, please ensure the electrical power is off as it may cause malfunction.
  • Please remove the A/C adapter when the watch winder is not in use.
  • Do not place or remove a watch on the watch holder while it is moving.
  • Please dispose of this product responsibly at an approved disposal or recycling facility. Do not dispose of this product in normal household waste.
  • To stop the winder from rotating, turn off the power or lift the lid while the door sensor mode is on.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals