BalanceFrom FITNESS Bike Trainer User Manual
- June 7, 2024
- BalanceFrom FITNESS
Table of Contents
BalanceFrom FITNESS Bike Trainer User Manual
NEED HELP? CONTACT US
support@balancefrom.com
Explosion Drawing
Parts List
Assembly Step (1)
step1-1>>> Put 2x rubber caps #7 onto base leg #2 and 2x rubber caps #7 onto support frame #6.
step1-2>>> Insert 2x bar sleeves #15 into sleeve tube #5.
Assembly Step (2)
Step2-1>>> Assemble bolt 8 #8, washer #9 and lock nut #10 on the product of STEP 1 as shown in above picture.
Assembly Step (3)
Step3-1>>> Insert bars #14 into bar sleeves #15 on the product of STEP 2.
Step3-2>>> Assemble sleeve support #16 and bolt 17 #17 as shown in above picture, tighten bolt 17.
Assembly Step (4)
Step4>>> Attach handle cap #13, tightening handle #12 and bolt 11 #11 on the product of STEP 3 as shown in above picture.
Assembly Step (5)
Step5-1>>> Assemble Adjusting handle #18, bolt 19 #19, Resistance wheel base
20 and bolt 21 #21 on the product of STEP 4 as shown in above picture.
Assembly Step (6)
Step6-1>>> Attach resistance wheel #22 onto resistance wheel rack #1.
Step6-2>>> Insert Bolt 23 #23, washer #24 and lock nut #25.
DISCLAIMER
This equipment must be used with care by capable and competent individuals under supervision, if necessary.
The use of any fitness equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>