SMARTIFY Nintendo Switch Controller User Manual
- June 7, 2024
- SMARTIFY
Table of Contents
User manual for SMARTIFY Nintendo Switch Controller
- Direction Pad (D-pad)
- Action Buttons
- Left Analog Stick (L2)
- Right Analog Stick (R2)
- HOME Button(Power on/off)
- LED Indicator 1,2,3,4,
- Turbo Button
- Capture
- Menu selection –
- Menu selection +
- Left triggers
- Right triggers
Functions of the controller
- Compatible with Nintendo Switch, Windows, Android, and Nintendo Switch Lite
- Two double schock motors for optimal vibration function
- Turbo function, screen capture function and home function
- Comes with 0.7m USB charging cable
- Two high quality analogue sticks, without deadzone
- Wireless controller firmware 2.1 EDR
- Built-in 550 mAh Li-ion battery, supports up to 10 hours of play time.
- With Sensor, no NFC, and no wake-up function
Turbo function and connecting
Turbo function
- Press a button of choice and press the Turbo button respectively.
- For example: hold button A pressed and press the Turbo button. Button A will keep going as if it is continously pressed. Button A is now being spammed without the user actually pressing it.
How do I connect the controller?
- Place the Switch in the Switch station. Connect the Smartify controller using the USB cable to the Switch Station.
- Press the H button on the Smartify controller.
- Go to system settings and go to controllers and sensors. Next press disconnect all controllers.
- Wait until the controller is paired.
- Disconnect USB from Smartify controller.
- The controller is now connected.
Attention: a reset button is located on the bottom of the controller. Use a needle to press the button. Use this button when the controller is unable to connect.
LED function indicators
- The LED light indicates the following meaning:
- The first led light indicates that he or she is player 1.
- The second led light indicates that he or she is player 2.
- The third led light indicates that he or she is player 3.
- The fourth led light indicates that he or she is player 4.
- Charging led indicator:
- 4 LED light that blink slowly indicate that the controller is empty, and needs to be charged.
- 4 LED lights that blink slowly indicate the controller is charging correctly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>