Yonovo Waterflosser Pro User Manual

Yonovo Waterflosser Pro

SAFETY INSTRUCTIONS

Danger

• If you do not understand the operating procedures and safety instructions, please do not use this product to avoid injury caused by improper operation.
• Please do not operate the product by means other than this manual.
• Do not disassemble this product or change the components of this product to avoid damage to this product or high-voltage electric shock, and the warranty is invalid.
• Do not use water with a temperature above 40c in the water tank and clean the mouth to avoid bums.
• If the tooth cleaner falls into the water while charging, please unplug the power plug of the wall power adapter before removing the product.
• If the power cord or plug is damaged, replace the power adapter before use.
• Do not put the product into fire or heat, and do not charge, use or place at high temperature.

warning:

• Do not use this product for other purposes than oral cleaning.
• Do not press the nozzle firmly on the gums or teeth to avoid damaging the gums.
• Please place this product in a safe place to avoid falling or falling into the water.
• Do not immerse this product in water to avoid failure or cause fire, electric shock, explosion and other hazards.
• Do not plug or unplug the power plug and charging plug with wet hands.
• Before connecting the power plug, please check whether the voltage marked by the power adapter is in accordance with the local voltage.
• Do not damage or modify the power cord, do not stretch, bend, or twist the power cord with force, nor can you place heavy objects on the power cord or jam the power cord between objects.
• Do not place the product, especially the power cord, near hot objects.
• Unplug the power plug and charging plug before maintenance.
• Do not place the product in high temperature or humidity, and avoid direct sunlight.
• Do not charge this product in hot or humid places, such as bathrooms and toilets.
• If not used for a long time, please unplug the power plug and charging plug to avoid fire or danger.

ATTENTION

• This product has no replaceable or repairable parts. If you need repair, please return it to the manufacturer.
• Do not use if there is no nozzle.
• Some mouthwashes may corrode this product, please do not use mouthwashes in this product. This product is not suitable for children, infants and operators who will not use it unless they are supervised or instructed by the person in charge of safety in using this product. Please keep it out of the reach of children and babies. Do not use it as a toy.
• Patients with periodontal disease or those who have had oral surgery in the last 2 months, please consult a doctor before use.
• When plugging or unplugging the power supply, be sure to hold the plug instead of the power cord.

Structure introduction

Operation introduction

Before use, please charge the product as follows:

1. Check to make sure that the product and hands are dry, and then connect the USS plug to the 5V adapter (the adapter is prepared by the user) and plug it into the socket. (figure 1)
2. Take off the charging cover, insert the other end of the USB cable into the charging socket of the punch, please pay attention to the charging plug and make sure it is inserted into place.

Warm Tips:

• If the indicator light flashes during or after use, The battery is low and needs to be charged.
• It takes 3-4 hours to fully charge When charging, the indicator light flashes to indicate that it is charging.
• The indicator light stops flashing to indicate that it is fully charged.

When using, please follow the steps below:

1. lnsert the nozzle into the hole at the top of the handle (Figure 3-1). If you need to replace the nozzle, first shut down and then gently press the nozzle release button to easily replace the nozzle (Figure 3-2). There are two kinds of nozzle insertion: one is rotary fixation insertion, the other is direct insertion, please choose the appropriate insertion method (sorry for the inconvenience again).

2. Fill the water tank with water. There are two methods for filling water, as follows:

   • Open the water tank cover, hold the tooth flusher horizontally, put water into the water tank and then close the water tank cover. (Figure 4).
   • Rotate the water tank in the unlocking direction to remove the water tank, hold the water tank vertically, push it up during installation, and then rotate it in place in the direction of the lock to lock. (Figure 5)

3. Select the desired mode by pressing the mode button. You can also switch to the desired mode by pressing the mode button during use. This product has three modes: cleaning, pulse and surfing. Long press the mode key for each gear to adjust the pressure (30-90psi).
   The specific functions are as follows:
   Clean: Deep cleaning and quick cleaning
   Pulse: Gently massage the gums to promote blood circulation and improve gum health. It is suitable for sensitive teeth. For the first time, use a dental appliance or users who need less strength than clear.
   Surf: Surge point spray, massage gums one by one, point-to-point precise and efficient rinse
   Tips: Dental experts recommend that the first user use the pulse mode for 1 week, and then use other modes after adaptation.

4. Before use, you need to hold the tooth punch vertically, the nozzle extends into the cavity, aligns the teeth or gums, and the mouth opens slightly so that the water can flow out smoothly. (Figure 6- 1 & 2)

5. Press the switch button to use. When using, please pay attention to the following points: (Figure 7) a. The direction of water flow is perpendicular to the teeth or gums; b. Move slowly along the teeth and clean the teeth in order:

   • The nozzle is aligned with the gum line and perpendicular to the gum;
     Tips: Do not spray water directly along the periodontal pocket. After using, please press the switch button to shut down. This product has a 2- minute timer function. It will automatically shut down after 2 minutes. If you need to continue to use it, please press the switch button.

After using, please follow the steps below:

1. Open the water tank cover and pour out the water. (Figure 8).
2. Press the switch button to flush the teeth and automatically drain the accumulated water. (Figure 9)
3. Press the switch button to shut down the punch, and then close the water tank cover.
4. Dry the tooth cleaner with a cloth. (Figure 10)
   Tips: In order to avoid the spread of bacteria, please ensure that there is no residual water in the dental flusher. If you plan not to use it for a long time, please clean the product and store it after drying.

Routine maintenance
Please use clean water or neutral detergent ta clean the product, do not use corrosive or abrasive detergent, because these will damage the product. Do not wash with hot water above 50°C.

Cleaning of the body:

• Please clean the body with a dry cloth or a damp cloth.

• Do not immerse the body in water for cleaning.
  Cleanlng of Water tank:

• It can be cleaned with a dry or wet cloth, or removed and rinsed with clean water.

• If you plan not to use it for a long time, please clean the water inside.
  Cleaning of Nozzle:

• It can be cleaned with a dry cloth or a damp cloth, or removed and rinsed with clean water, then wipe dry with a cloth.

• Do not bend, pull or twist the nozzle hose.

• Dental experts recommend replacing the nozzle every 6 months.
  Cleaning of power adapter:

• Please wipe the metal part of the plug with a dry cloth every 6 months to avoid accumulation of dust and poor contact.

Troubleshooting

Disposal

This product uses rechargeable batteries. At the end of product life, before discarding the product, be sure to remove the battery and recycle or dispose of it in accordance with local waste management regulations. If in doubt, please consult your local waste management department.

Product warranty

Thank you for choosing a series of oral care products. The free warranty for products during the warranty period will be implemented from the date of purchase. The contents of the warranty during the warranty period are as follows:

1. This product warrenty is only valid in the Europe.
2. Within one years from the date of purchase, you will receive free warranty service if the authorized maintenance station personnel confirm that the product is damaged due to manufacturing processes or components.
3. This free warranty service does not include vulnerable parts (such as nozzles, etc).
4. Please note the following conditions, even during the warranty period, you can not get free warranty service:
   • In the event that this warranty and purchase certificate cannot be presented;
   • Failure to use, maintain and store according to the requirements of the product manual;
   • In the case of failure caused by unauthorized maintenance station inspection and self-disassembly and repair;
   • In the case of unauthorized alteration of the contents of the warranty and purchase certificate;
   • other situations caused by force majeure (such as natural disasters, abnormal voltage, etc.);
   • Product aging and wear caused by normal use, but does not affect the normal use of the product;
   • In case of failure caused by general household use (such as industrial and commercial use).
5. Customer support Sales@yonovo.nl or WhatsApp +316 30667463

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>