TIME TIMER Watch Plus Instructions

TIME TIMER Watch Plus Instructions

GETTING STARTED WITH YOUR TIME TIMER WATCH PLUS

The Time Timer Watch Plus uses a red disk to visually depict how much time remains. As time elapses clockwise, the disk gradually disappears, helping you see and manage time more effectively.

For more detailed instructions and how to video, visit the Time Timer Support Page.

**CHOOSE YOUR MODE

**

The Time Timer Watch PLUS comes in three modes: Clock, Time Timer, and Alarm. Toggle between modes by simply pressing the MODE button on the upper right.

• Clock

1. Time Timer
   

2. Alarm
   

QUICK START

• * To set the watch PLUS is any mode, press the SET button (top left) for 3 seconds.

  • The first value will start to flash. Set that value by using the Adjust Setting (-) and (+) buttons.
  • Once the value is to your liking, press the NEXT button on the top right
  • Continue setting until all values are selected.
  • To exit at any time, press the SET button.
    

CLOCK MODE

The Clock mode displays time of day using both a traditional analog clock face and a digital numeric display. If a Time Timer is running or an Alarm has been set, a unique icon displays on the right side of the watch face. Time can be viewed in 12- or 24-hour format.

TIME TIMER MODE

The Time Timer mode includes two options: 1) Original 60-minute Timer or 2) Custom Timer. The Custom Timer allows the disk to be scaled to represent any duration from 1 minute to 99 hours. A numeric display of time remaining is shown below the red disk. Alert can be set to audible, vibrate, both, or no alert. Timer can also be set to repeat upon completion.

ALARM MODE

The Alarm mode can be set in 12- or 24 hour time formats. Set alert to activate alarm. Alert can be set to audible, vibrate, both, or no alert.

QUESTIONS? WE’RE HERE TO HELP: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>