Smart Standard 36″ x 84″ K-Barn Door Installation Guide
- June 7, 2024
- SMART STANDARD
Table of Contents
Smart Standard 36" x 84" K-Barn Door Installation Guide
Please visit www.smartstandard.com/k36n2 to watch our step-by-step installation video
Email: smartstandard@aliyun.com
Stile and Slat End Views
- On a flat, clean surface, lay out one side stile (A) with the groove facing to the right. Assemble top rail (B1) , middle rail (B3) and bottom rail (B2) to A1 by fitting the tongue into the groove of A.
- Assemble the left side slat (C1) with the tongue facing right. Lay all middle slats (C2) next to C1 with the tongue facing right. Lay the right side slat (C3) to the right of the last C2 with the groove facing left.
Place the other side stile (A) beside the assembled slats and rails with groove facing left. Slide to the left to cover the top and bottom rail tongues and the edge of the slat assembly.
- Insert 3⁹⁄₁₆” lag bolts (E) into holes on the side of side stile (A), use phillips screwdriver to fasten lag bolts to B1,B3 and B2 Insert wood plugs (G) into holes on the side of side stile (A) to complete the installation.
- Install the diagonal overlays (D1) by using ¹³⁄₁₆” lag bolts (F) on the assembled door surface. Turn the door over, Repeat the former step to install D2 on the other side.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>