Haier Washing Machine User Manual

Washing Machine

User Manual Washing Machine

HWF90BW1

1400 1200 1000 800

Elements
Thanks for purchasing a Haier Product
Please read these in ons carefully before using this appliance. The ins ons contain important informa on which will help you get the best out of the appliance and ensure safe and proper installa on, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance. If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the new owner can become familiar with the appliance and safety warnings.

Accessories
Check the accessories and literature in accordance with this list:

1x User Manual

User Manual HWF90BW1

1x Drain hose bracket

1x Bo om Cover

5x Blanking Plugs

1x Felt Denoise pad

1x Inlet hose assembly
Y Y

1

Index

………………………………………………………………………………………………………………………………. 3

re e …………………………………………………………………………………………………………………………….5

……………………………………………………………………………………………………………………………….8

e ………………………………………………………………………………………… ……………………………..16

Tr ubl

g …………………………………………………………………………………………………………………..19

Technical data ………………………………………………………………………………………………………………………20 rvi e …………………………………………………………………………………………………………………..21

Legend

Ye

N

O

l

Disposal
The pre a i

bh

i

l

e

f h

life he a

el r a

i

T pr

a ge he r

r

l a pa

e e ie r

e

e e . Th

e

ur .

ra not
l e
ef a

h

i he re

her h

e

p

e relev

he

k

rr

l afe re

fety.

r

k

he

pur ha e. Thi pr u a i ele r a

e h not

r a.

2

This appliance is not intended for use by persons (including children) with reduced physical,

their safety. Children should be supervised to ensure that they do not play with the appliance.
Do…
Make sure that the transport bolt is removed. Use a separate earthed socket for the power supply. Make sure that the plug is accessible. Hold the plug and not the electric cable when unplugging the power supply. Make sure that the fuses in the power circuit are rated for 15A.
and rubber components from aging. Make sure that the power card is not caught under or in the appliance and avoid damage to the power cable.
there will be leakage, turn o the water supply an x it. Do not use the washing .
Make sure that the water pressure range in 0.03MPa-1MPa
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. This washing machine is used for the following places: ­ staff kitchen areas in shops, offices and other working environments; ­ farm houses;
­ bed and breakfast type environments;

Do not…

Touch or use the appliance when barefoot or with wet or damp hands or feet.

ammable detergent or dry cleaning agent.

Use any ammable sprays in close vicinity to the appliance.

Remove or insert the plug in presence of

e gas.

Allow children or

persons to play with the appliance or packing materials.

Install the appliance outdoors in a damp place, or in an area which may be prone to water leaks such as under or near a sink unit. In the event of a water leak allow the machine to dry naturally.

Place the washing machine directly on a carpet, or close to a wall or furniture.

3

During daily use of the appliance
Do…
loose threads to prevent the items from being entangled. If necessary, put small items into a small bag or net

electricity, and for safety. Wipe clean the lower part of the porthole.
odors. Let the power cord be replaced by the manufacturer, his service agent or other accordingly
, in case it is damaged. Use the hose-set supplied with the appliance.Old hose-sets should not be reused.
Do not…
Touch the washer door during the washing process, it gets hot. Place heavy objects or sources of heat or damp on top of the appliance. Hot wash from rubber or sponge-like materials

Force the washer door to open,the door he washing procedure is ended.

ed with a self-lock device and will open shor tly

Open the washer door if the water level is visibly over the porthole.

Cover the washing machine with

c cover so that the washing machine can dry out when not in use

Saving Tips

Achieve the best use of energy, water, detergent maximum load size

e by using the recommended

Do not exceed the detergent dosages indicated in the manufacturer’s instruc ns.

Save

me by

before using a tumble dryer.

n speed to reduce the water content in laundry

Choose the correct washing temperature.Modern detergents can wash with very good result already in lower temperature than 60°C. Only use higher temperature than 60°C for very dirty laundry.

Do not overload the washing machine: HWF90BW1 Max.load is 9kg

4

Before Use

Before Use
Descrip on
This diagram may be slightly purchased.

nt from the layout of the washing machine you have just

Control panel Door handle Work top Start/Pause Washer door
Filter cover
1400 1200 1000 800

Drain hose

Water inlet valve

Power cord

Back cover screws

Back cover

T3

S1

T4

S2

S4

T1

T2

S3

Preparing the machine
Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon opening the package, water drops may be seen on the pla bag and the porthole. This is normal phenomenon resul ng from water tests in the factory.

5

Before Use

In

on

screw the bolts through the four holes on the board on to the tub firmly.(Figure 3.)
4
upright again(Figure 4.)
8BSNUJQ /PJTFSFEVDUJPOQBEJTPQUJPOBM
DPVMEIFMQUPSFEVDFOPJTF
QMFBTFBTTFNCMFJUPSOPU BDDPSEJOHUPZPVSPXOEFNBOE

Y

Y

1

Dismantle the transport on bolts

The transpo on bolts are designed for clamping an vib on components inside of the washing machine during the transpo on process.

Remove the back cover. Remove the four bolts on the rear side and take out

Replace the back cover. Fill the holes le by the bolts with blanking plugs.
Note:
When you replace the back cover, the convex must face to outside, and you have to insert the back cover from the two gaps as shown in fig.5. Keep the transporta on bo stabilizers in a safe place for later use.

6

Adjus ng the feet and locking nut
There are adjustable feet under the bo om of the washing machine. Before use, they should be adjusted so that the machine is level. This will minimize vibr ons and thus noise during use. It will also reduce wear and tear. We recommend to use a spirit level for adjustment.Floor should be as stable and flat as possible. 1. Loose the lock nut (1) by using a wrench. 2. Adjust the high by turning the foot (2). 3. Tighten the lock nut (1) against the housing.
Inlet Hose
Connect the nut on the inlet hose to the connector on the water valve.
Connect inlet hose to a water tap with cold, fresh water.

Use the hose-set supplied with the appliance. Old hose-sets should not be reused.
Drain Hose

Use the drain hose bracket to keep the end of the

drain hose retained and prevents the

of

water. Don’t extend the length of the drain hose; if

an extended hose is required, please consult a

serviceman or plumber.

The height of the drainage outlet must be 80-100
cm. Fix the drain hose to the clip at the back of the washing machine to prevent it from dropping off.

The drain hose should not be submerged in water and should be securely fixed and leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less than 80cm, the washing machine will con nuously drain while being filled (self-siphoning).
Conne ng to Power Supply
Before connec ng to the power supply, check:
The socket is adequate for the maximum power of the washing machine (For safety, fuses in the power circuit should be rated for no less than 10A). The voltage should meet the requirement The power outlet should be capable of accep ng the was hing machine plug. Connect the machine to an earthed socket outlet.

7

ons
Control Panel

10
1400 1200 1000 800

1

4 5 67 89

3

2

1. 2. 3. Program Dial 4. Wash Temp 5. Spin Speed

6. 7. Extra Rinse 8. Delay 9. 10. LED Display

Oper onal Func ons

Nº Func on

Explica on

1 Detergent

Open the drawer, three compartments can be seen:

drawer

Compartment 2: Detergent for programs 1 to 15.

2 1

for the various washing temperatures, please refer to the manual of detergent.Use low Sudsing or Front Loader liquid

2

press
3 Program Dial By turning the knob clockwise/counterclockwise, the required program can 6
corresponding light will illuminate.

4 Wash Temp Press

indicator. Select a temperature according to the type of laundry.Note: If there

is no indicator light displayed, this means cold wash.

5 Spin Speed

Press

will be displayed on the indicator.Note: If there is no indicator light displayed,

this means no spinning.

Di erent water temperatures and spinning speeds can be set for

special requirement.

6

very dirty,

8

7 Extra Rinse

8 Delay

disappears when the extra rinse ends.
1-15 are used. Press
press

programs

the washing machine will start the wash program directly.
9 Start/Pause When the washing machine is connected to the power socket and a press
press Press press
screen start blinking, press the Power switch, the program will be cancelled.
10 LED Display

accordingly. When the laundry is not balanced during spinning, the

To cancel audible alarm Alarm sound can be cancelled if it is required (not recommended) Switch on the washing machine and turn the program knob to spin cycle, then press the
R

been cancelled. To reinstate audible alarm Switch on the washing machine and turn the program knob to spin cycle, then press the
R

Speed Up Extra Rinse D

SPEEd uP

P

SPEEd uP

9

ons
Program Modes

2

1 Detergent compartment for prewash mode

1 2 Detergent compartment

P rogram
n c

T emp . Max
90° C

Preset
30°C

60°C 30°C

3 Mix 4 Wool
5 Underwear 6 Sport 7 Jeans 8 Hygienic 9 Fast 10 Express 15 11 Daily Wash 12 Baby Care 13 Delicate 14 Hand Wash 15 Duvet 16 Spin

60°C 30°C 40°C —

60°C 40°C

40°C 20°C

60°C 30°C

90°C 90°C 40°C 40°C 40°C —

60°C 30°C

90°C 40°C

30°C 30°C

30°C 30°C

40°C 40°C

—

—

2 3 1 Fibre Type Preset Spin Speed SPEEd uP

1400 rpm

Chemical fibre fabrics

1200 rpm 1000 rpm

Woolen fabrics Underwear Sports Wear Jeans
n

800 rpm
1000 rpm 800 rpm
1000 rpm 1000 rpm

n

1000 rpm

h 1000 rpm

s 1000 rpm

1000 rpm

Silk Duvet

800 rpm s 400 rpm
800 rpm

—

1000 rpm

Yes

No

10

Program
Synthe c Mix Wool Underwear Sport Jeans Hygienic Fast Express 15 Daily Wash Baby Care Delicate Hand Wash Duvet Spin

Max Load
9 kg 5 kg 5 kg 2 kg 2 kg 2 kg 5 kg 5 kg 5 kg 2 kg 2 kg 5 kg 2 kg 2 kg 2 kg 9 kg

Temp.
30°C 30°C 30°C –40°C 20°C 30°C 90°C 40°C
–30°C 40°C 30°C 30°C 40°C —

Washing Time
Auto Auto Auto 0:48 h 1:03 h 0:25 h 1:17 h 2:16 h 1:00 h 0:15 h 0:51 h 1:35 h 0:41 h 0:46 h 1:12 h 0:07 h

The actual water temperature may differ from the declared cycle temperature. If the machine is used for commercial purposes the warranty will be void. Do not use for purposes other than that which the machine is designed for. Follow the instruc ons given on the label of each garment and wash only machine – washable garments.
HWF90BW1
Co on , 40°C, 1400rpm and the intense op on selected is recommended water and energy saving cycle for normally soiled, everyday washing. The detergent dosage: rated capacity 12.5g9 and -foam aid is 18g. Detergent dissolvent method: Dissolve the detergent first and pour the dissolved detergent into the machine when the main wash starts.

11

Washing Methods
the machine is use for commercial purpose the guarantee will not be valid anymore. Do not use it for purposes other than that for which
on the label of each garment and wash only machine-washable garments.
Power Supply
Connect the washing machine to the power supply (220V to 240V~/50Hz).
Turn on the tap. The water must be clean and clear. Before use, check for leaks in the joints between the tap and the inlet hose by turning on the tap.
Preparing the Laundry
Sort out clothes according to fabric (c how dirty they are. Separate white clothes from colored ones. Wash them rst by hand to check if they fade or run.
washing machine). Close zippers and hooks, make sure place small items such as socks, belts, bras, etc. in the wash bag. Unfold large pieces of fabric such as bedsheets , bedspreads, etc. Turn shirts inside out.
which user has to pay by him and can cause damage in the machine. Empty pockets (keys, coins, etc.) and (e.g. brooches).
12

ons

Loading the appliance
1400 1200 1000 800
Open the washer door and put in the laundry piece by piece. Close the door ghtly.
using the washing machine, let it run unloaded for one program to prevent the laundry from being tainted by oil or dirty water from the washing machine. Before washing you should run the machine, but without detergent, with 60°C program.
Do not overload the washing machine.Note the different maximum load according to programmes.Rule of thumb for maximum load: Keep six inches between load and drum top.Close the door carefully. Make sure that no pieces of laundry are pinched.
Sele ng Detergent

The wa

cy and the performance is determined by the quality of detergent used. Special

non-foaming detergent produces good washing results. Use spe etergents for duvet and

woollen goods. Do not use dry cleaning agents such as trichloroethylene and similar products.

Do not add more detergent than needed; otherwise, it may cause the situa ons as following

and washing machine malfun on imp g washing machine’s life.

Due to the increasing foam, the rinse me will be longer than normal;

The foam may

from the detergent drawer because of the increasing pressure of

the foam;

It may remain foam without cleaning out er th al

spinning cycle.

Recommend on: Clean the detergent drawer once a week.
Please follow the dosage recommend on on the powder or liquid detergent package.

Adding Detergent
Slide out the detergent drawer and put the required detergent and so ening agent into the corresponding compartments. Push back the drawer gently. (Refer to the instruc ons on the drawer)

Detergent should be added to compartments 2.

Do not add detergent to compartment 1.

2

Use liquid detergent according to the instru ons on its package. Do

not use liquid detergent if the prewash mode or “Delay” is

1

selected.

Do not overuse so ener; otherwise, it will damage the ar l bers.

13

ons

Sele ng program

1400

1200

To get the best washing results, an appropriate

1000 800

washing program should be selected according to

the laundry type. Please turn the program knob to

select the right program.

Sele ng fun on
Select the required op ons. (Refer to the “Control panel” pages 8,9 and 10)

Se ng washing temperature
Press and hold down the temperature bu on un he desired temperature is selected.

Se ng spin speed

Press and hold down the speed bu on un e desired speed is selected. See ”

onal

fun ons” on the “Control Panel” pages (08 and 09) for selec ng temperature and spin speed. It is

advisable to select the recommended value.

Washing
Press the Start/Pause bu on. The washing machine will operate according to the preset programs. The washing machine will stop op on autom ly when a washing cycle ends. The “End” sign will appear on the display. Open the washer door and take out the laundry.

A er washing
Turn o the water supply and unplug the power cord. Open the washer door to prevent forma on of moisture and odors. Leave the door open while not used.

14

Care Chart

Machine Wash, COLD
Machine Wash, WARM Machine Wash, HOT
Machine Wash,COLD Permanent Press Machine Wash,WARM Permanent Press
Machine Wash,HOT Permanent Press Machine Wash,COLD Gentle Cycle
Machine Wash,WARM Gentle Cycle
Machine Wash,HOT Gentle Cycle

Hand Wash
Do Not Wash
Bleach as needed Any bleach, like Clorox® , may be safely used
Non-chlorine Bleach as needed Use only a color-safe bleach, like Clorox 2®
Do Not Bleach No bleach product should be used including detergents with bleach – or follow bleach package test procedures to test for bleach safety.
Wool Mark

Tumble Dry,NO HEAT
Tumble Dry,LOW HEAT
Tumble Dry,MEDIUM
Tumble Dry,HIGH
Tumble Dry,Permanent Press, NO HEAT Tumble Dry, Permanent Press,LOW HEAT Tumble Dry,Permanent Press, MEDIUM Tumble Dry,Gentle Cycle, NO HEAT
Tumble Dry, Gentle Cycle, LOW HEAT Tumble Dry,Gentle Cycle, MEDIUM

Do Not Tumble Dry Line Dry
Drip Dry
Dry Flat
Don’t dry clean
Iron, Steam or Dry, with LOW HEAT Iron, Steam or Dry, with MEDIUM HEAT Iron, Steam or Dry, with HIGH HEAT Do Not Iron with Steam Do Not Iron

a professional drycleaner Do Not Dryclean Dry cleaning with any solvent
Dry cleaning with pericloride

Load Reference
Material Bed Sheet Blanket Blended fabric clothes
Jeans
Ladies Pyjamas Shirts Socks
Underwear

Made of
Wool /
/
/ / Blended fabrics
Blended fabrics

Load in grams Approximately 800 Approximately 3000 Approximately 800
Approximately 800
Approximately 200 Approximately 300 Approximately 50
Approximately 70

15

Maintenance
Cleaning and Care
A er washing
Turn o the water supply and remove the electrical plug each wash. Open the washer door to prevent
form on of moisture and odors. If the washing machine is idle for a long period, drain the water in the machine and replace the drain hose.
Cleaning the detergent drawer
Take always care there are no detergent residues. Clean the drawer regularly :

1. 2. Press 3.
      insert the drawer back in the appliance.
      Cleaning the machine
      Unplug the machine during cleaning and maintenance. Use a so cloth dampened with soap liquid to clean the machine case and rubber components. Do not use organic chemicals or corrosive solvents.

Clean the lter once a month:

1

2

3

4

1. Turn off and unplug the machine(Fig.1). 2. Open service flap. You can either use a coin or a
screwdriver(Fig.2) . 3. Provide a flat container to catch leach water(Fig.3).
There could be bigger amounts!

4. Pull the drainhose out and hold its end above the

5

6

container (Fig.3).

5. Take the sealing plug out of the drainhose (Fig.3).

7

8

6. and push it back into the machine(Fig.4).
7. Unscrew and remove counter clockwise the pump(Fig.5). 8. Remove contaminants and dirt (Fig.6). Clean carefully pump filter, e.g. using running water((Fig.7). Refix it thoroughly((Fig.8). Close service flap.

r must be in place, or it may lead to leakage.

Place a container under th

ter, to collect any excess water that may come out

of the drain pump

In case of power failure

”

When power

sumed.

door opening is mechanically blocked. To get out any laundry water level should not be seen in the glassy porthole of the door. – Danger of burns!

case of abrupt power failure or the need to cut o
resume when the power is on again. 16

power

Maintenance
Water inlet valve and inlet valve r
To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and inlet valve regularly.
Moving the machine
Remove the back cover. Remove the blanking plugs.
Tighten the bolts with a spanner. Replace the back cover.
Long periods of disuse

Display Codes

Codes CLr FLtr
E2

Causes 6 minutes. Door is not properly shut.

Clean the filter and check the drain hose
contact the maintenance personnel. Shut the door properly, and then press the

F3

Temperature sensor not properly

Contact the maintenance personnel.

connected or damaged.

F4

Heater error (Appears at the end of a

Contact the maintenance personnel.

cycle).

E4

Water level not met in 8 minutes .

Make sure that tap is turned on, and water

The height of the drain hose is below 80 pressure is normal.

cm.

The drain hose is in water.

maintenance personnel.

Install drain hose within 80-100 cm of

height.

Make sure the drain hose is not in water.

17

Maintenance

F7 E8 FA FC1
FC2
End 19:30 1:25 UNb

Motor Error

Water level sensor error.

display board and inverter

between

between display board and power board

End of wash cycle.

Contact the maintenance personnel. Contact the maintenance personnel. Contact the maintenance personnel. Contact the maintenance personnel.
Contact the maintenance personnel.

Washing machine has an unbalanced load 1.In case washing 1 piece of laundry(carpet, bed sheet,table sheet,ect) make it
weight is greater than allowable maximum, symmetrical inside the drum. the washing machine will not spin and will 2.Lower the wet weight of laundry pieces
by wringing manually and placing them and noise
pieces inside the washing machine in a
of the drum. 4.Add 1 or 2 pieces of laundry into the drum to reduce the unbalanced load effects. 5.Restart the spin cycle by choosing spin programme.In case the failure persists, please ask a qualified technician to repair it.
6.Select a lower spin speed, and if OK then select Spin program and a higher spin speed.

Temp.

Intense

It shows “lock”.

knobs. To unlock press the ” Temp.” and Intense

case of abrupt power failure or the need to cut o resume when the power is on again.

power

choose another program.

Power on, then turn program selector again to

During the spin process, if too much foam is inspected, in order to protect the motor, the

18

Trouble-Shoo ng

Trouble-Sho
Problem

Causes

Solu ons

Washing machine fails to operate. Washing machine c with water. Machine is draining while being Drainage failure.
wash cycle. Excessive foam in the drum, which is

Power failure. The washer door is not properly closed. Machine has not been switched on.

Check the power supply. Close the washer door properly. Make sure the machine is switched on.

Water tap is not turned on. Water pressure is less than 0,03 MPa. The inlet hose is kinked. Water supply failure. The program knob is not properly set. The washer door is not properly closed.
ter is blocked.

The height of the drain hose is below 80 cm. The drain hose is in water.

Drain hose is blocked.

Drain hose end is higher than 100 cm

above

vel.

ter is blocked.

removed. Washing machine is located on an uneven surface or is not level. Machine load is over 9kg.

Water or electricity failure. Washing machine gives an error message.

The detergent is not a low-foaming type or for manual wash. Excessive use of detergent.

P Turn on the water tap. Check water pressure. Check the inlet hose. Ensure the water supply. Set the program knob properly. Close the washer door properly.
ter.

Install drain hose within 80-100 cm of height. Make sure the drain hose is not in water.

Unblock the drain hose.

Make sure the drain hose end is lower

than 100 cm abov

vel.

ter.

Make sure the washing machine is on an even surface and levelled. Reduce amount of laundry in the drum.
Check the power supply or water supply.
Check display codes. the Start/pause button again to
Check if your detergent is appropriate.
Reduce amount of detergent in the

Spinning fails

adjusted Unbalance of the laundry

This is normal and doesn’t a ect the
Add clothes or run a spinning program again.

19

Technical data

Basic technical informa on regarding the appliance.
Power source Max. working current (A) Water pressure (MPa) Nominal load (kg) Spinning speed (r/min) Washing programs Rated power (W) Dimensions (HxDxW mm) Net weight (kg) Power consump on of the off-mode(W) Power consump on of the -on mode(W)

HWF90BW1
(220-240)V~ 50Hz 1 0
0.03P 1 9.0 1400 1 6 2000
850 x 650 x 595 72 0.44 0.44

20

Card included in the product.

not solved. Please check the Warranty

21

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>