WISE DeviceOn Motherboard User Manual

June 7, 2024
WISE DeviceOn

logo

WISE DeviceOn Motherboard

product

Features

  • Supports Intel Pentium, Celeron, Atom, Quad Core & Dual Core processor
  • Two 260-pin SO-DIMM up to 32 GB DDR4 3200 MHz SDRAM
  • Supports DP++ 1.2/HDMI 1.4b/eDP (optional)/LVDS(optional)
  • Supports 1 PCIE x1 or 2 M.2 (B+E key), 6 COMs(4 COM optional), 3 USB 3.2 Gen2, and 5 USB 2.0
  • Lower total cost of ownership with DC12V support and onboard TPM2.0 (optional)
  • Supports Device-On and Embedded Software APIs

Specifications


Processor System

| CPU (10nm)                                    J6413                    J6412 J6426                    N6211                   N6210 x6413E
---|---
Core Number                                   4                            4 4                            2                            2         4
Base Frequency                               1.8GHz                   2.0GHz 2.0GHz                   1.2GHz                   1.2GHz 1.5GHz
BIOS                                                AMI 256 Mbit SPI


Expansion Slot

| M.2                                                  E key for wireless module (Type: 2230)

B key for storage and LTE module, only support PCIex1 signal (Type: 2242/2280)

PCIe                                                PCI Express x1


Memory

| Technology                                     Dual channel DDR4 3200 MHz SDRAM
Max. Capacity                                   32 GB/32 GB per SO-DIMM
Socket                                             2 x 260-pin SO-DIMM (Non- ECC)



Graphics

| Controller                                         Intel Gen 11 Graphics Engines
LVDS/eDP                                        1 (Sku option) / 1 (BOM option)
HDMI                                               1 HDMI 1.4b
DP++                                               1 DP 1.2
Triple display                                    DP + HDMI, DP + HDMI + eDP (optional), DP + HDMI + LVDS(optional)


Ethernet

| Interface                                          10/100/1000 Mbps
Controller                                         GbE LAN1: Realtek 8111H

GbE LAN2: Realtek 8111H

Connector                                        Max. RJ-45 x 2
SATA| Max Data Transfer Rate                      600 MB/s
Channel                                          1



Rear I/O

| DP 1.2                                             1
HDMI 1.4b                                      1
Ethernet                                          2
USB                                                 4 (3USB 3.2 Gen2 + 1USB2)
Audio                                               1 (supports Line-out by default, converts to Mic in or Line in)
DC jack                                            1 (2.5 mm)





Internal Connector

| LVDS & Inverter                                 1 (optional)
eDP                                                 1 (optional)
USB                                                 4 USB2.0
Serial                                               6 (COM1 support 5V/12V selection; COM2 support RS-232/422/485, set by Jumper; COM3~COM6 support RS-232

(COM3~6 BOM option))

SATA                                                                      1
SATA PWR Connector                     1
M.2                                                  2 (B key for storage and LTE module, E key for wireless module support)
GPIO                                                8-bit
PS/2 KB & MS                                1
Watchdog Timer| Output                                              System reset
Interval                                             Programmable 1 ~ 255 sec/min
Power| Power Type                                      Single voltage 12V DC input; 1 x External DC jack; 1 x Internal 4-pin (2×2) power connector; Supports AT/ATX mode
Typical Power Consumption              TBD


Environment

| Operating Non-Operating
0 ~ 60 °C (32 ~ 140 °F) with 0.7m/s air flow (for D/J/L

Temperature                                     SKU) -40 ~ 85 °C (-40 ~ 185 °F)

-20 ~ 70 °C (-4 ~ 158 °F) with 0.7m/s air flow (for Z SKU)

Physical Characteristics| Dimensions                                     170 x 170 mm (6.69″ x 6.69″)

Block Diagram

Ordering Information

Part Number| CPU| Memory| LVDS/eDP| HDMI| DP| GbE LAN| COM| SATA III| USB3.2/2.0| M.2| TPM| AMP| PCIex1| Thermal Solution| Operating Temp.
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
AIMB-218L-S0A1E| N6211| 2| -/-| 1| 1| 1| 2| 1| 3/5| 2| –| –| 1| Passive| 0 ~ 60 °C
AIMB-218LA-S0A1E| N6210| 2| -/-| 1| 1| 1| 2| 1| 3/5| 2| –| –| 1| Passive| 0 ~ 60 °C
AIMB-218D-S0A1E| J6426| 2| 1/(1)| 1| 1| 2| 6(High Speed)| 1| 3/5| 2| 1| 2 x 6W| 1| Passive| 0 ~ 60 °C
AIMB-218J-S0A1E| J6413| 2| (1)/(1)| 1| 1| 2| 2(+4)| 1| 3/5| 2| (1)| (2 x 6W)| 1| Passive| 0 ~ 60 °C
AIMB-218JA-S0A1E| J6412| 2| (1)/(1)| 1| 1| 2| 2(+4)| 1| 3/5| 2| (1)| (2 x 6W)| 1| Passive| 0 ~ 60 °C
AIMB-218Z-S0A1E| x6413E| 2| 1/(1)| 1| 1| 2| 6(High Speed)| 1| 3/5| 2| (1)| (2 x 6W)| 1| Passive| -20 ~ 70 °C

Note: Passive = fanless

  • () BOM options available on MP version
  • Bulk packing(wo/Cables, Startup manual, M.2 Screw)

Packing List

Part Number Description Quantity
1700003194-21 SATA HDD cable 1
1700018785-01 SATA power cable 1
1701200220-01 1-to-2 serial ports cable kit, 22 cm 1
1700029538-01 1-to-4 serial port cable, 35cm for AIMB-218D 1
1960100026T001 I/O port bracket 1
2046021800 Startup manual 1
1960064228T011 Fanless heatsink for AIMB-218L/J/D 1
1700023082-11 ATX 210P to 13P-2.0 25cm cable 1

Optional Accessories

Part Number Description
96PSA-A60W12V1-4 Adapter AC100-240V 60W +12V/5A
96PSA-A84W12V1-3 Adaptor AC100-240V 84W, 12V/7A

Optional Chassis

Part Number Description
AIMB-B2000-00YE Mini-ITX chassis with optional DC Adaptor

Embedded OS/API

OS/API Part No. Description
Win 10 20706WX9ES0145 img W10 19EL AIMB-218 64b 1809 ENU

logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals