marsoar Glide 3-Axis Gimbal Stabilizer for Smartphones User Manual

marsoar Glide 3-Axis Gimbal Stabilizer for Smartphones User Manual

Thank you for purchasing marSoar series product. marSoar Glide is specially created for amazing videos by using a powerful app and superior motion stabilization algorithm. It enables people to be a director of their own life at anytime and anywhere, free their hands to marSoar every wonderful moment with its many useful function . The marSoar Glide will bring you a unique new user experience. please read this Manual carefully before using the product.

TIPS:

1. Please download the app using the product. (Note:Applicable mobile system is above IOS 8.0 or Android 5.0) For Apple user,please search a marSoar” in APP STORE.For Android user,please search marSoara in Google Play or download ” marSoar.apk” on official website.
2. Before turning on the marSoar Glide , please make sure that the mobile device is mounted correctly on the marSoar Glide.
3. Please adjust the position of the mobile device on the marSoar Glide holder to make sure the phone stands in a balanced horizontal balance state when you turn on the marSoar Glide ( Note incorrect balance of mobile device will affect the battery duration and stability augmentation and will make the motor heating.)

INCLUDED:

1. fmarSoar Glide x 1
2. User Manual x 1
3. Micro USB cable x 1

Overviews of Product

(Please note smartphone as below photos shows is not included)

Battery
Battery Type: LI-ion18650
Voltage: 7.4v
Capacity: 1800Mah

Bluetooth
Name: rnarSoar Glide
Version: Low power
consumption
bluetooth 4.0

Operation introduction of marSoar Glide

marSoar Glide Functions including joystick, shootrig, photographing, working mode and vertical and the horizontal switch etc. All these functions as following are operated on the application.

Status Indicator

Please refer to the list below for the instruction of the state indicator during the marSoar Glide running.

Battery power Indicator

One LED on| Battery remains 0% to 25%
Two LED on| Battery remains 25% to 50%
There LED on| Battery remains 50% to 75%
Four LED on| Battery remains 75% to 100%
Four LED are flickering| System will he automatically off after 10 seconds
Four indicator lights all power off| Activate overt’ ii rent protection
Status Inoicator

Red LED is on| Pan following mode
Blue LED is on| Following mode(Default mode)
Green LED is on| Locking mode
White LED| Calibrating
All LED are off| Calibration finished
Charging Indicator

Red LED is on| Charging
Red LED is off| Charging finished

Low Voltage alarm

The system will be automatically shut off when the voltage is be ow 6.8V for more than 10 seconds.

marSoar application and Firmware upgrade

How to Connecting

1. Turn on the power of stab izer and the bluetooth
2. Enter marSoar application, click connecting device’ .find the stabilizer you want to connect.

Please follow marSoar official We-chat or check the website for the tutorial video.

Firmware upgrade

Upgrade the firmware via marSoar application.

Gyro calibration

Please following below steps to start Gyro calibration when the Roll axis was not horizontal, the Pan axis drifts or other abnormal condition  after long time use.

1. Power on marSoar Glide

2. Click the button of vertical and the horizontal switch 3 times and then press it for 3 seconds, then marSoar Glide will stop working

3. Put marSoar Glide on a horizontal place (as the photo below), click the button of vertical and the horizontal switch to star:the calibration. (Please keep the marSoar Glide static during calibration)
   

4. When the status indicator all are off in indicates that the calibration is finished

5. Restart marSoar Glide”

(Notes Please repeat above steps f abnormal condition is still exist after calibration.)

(Notes: Above data are from laboratory, please refer to the actual data when use.)

Attention

1. After the stabilizer is assembled, please make sure the smartphone is mounted properly before turning on the power
2. Please turn off the stabilizer when it is not being used or left unattended.
3. Any damage to the product caused by improper use will not be covered in the warranty but can be sent back to factory for repair at buyer’ s expense.

Warning and Disclaimer

1. All illegal usage is prohibited. User will be liable for all his actions when using this product.
2. marSoar shall not assume any risks and responsibility (including direct or indirect lost of third party) of all kinds of operation by terminal customer.
3. marSoar will not provide any service for the product from abnormal channel or unknown purpose.
4. Due to the possible upgrade and modification of the software for the products, it may trigger difference of the functions vary from that in the illustrations. Please read the upgrade illustration carefully before upgrade of the software and follow the instruction on the illustration.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>