Big Green® Machine Professional Carpet Cleaner Replacing the Belt | Support
- June 7, 2024
- Bissell
Table of Contents
To Replace the belt on your machine, follow these steps:
-
Turn off and unplug the machine
-
Remove the dirty and clean water tanks from the base of the machine
-
While standing behind the machine, lay it on it’s side (cord side up)
-
Look at the bottom of the machine and find the back center of the brush carriage where the carriage latch is located, between the brush assembly and the front wheels
-
Pull brush carriage towards you with one hand until it stops
- Pinch the carriage latch with other hand while pulling the carriage towards you
-
The carriage should swing out to access belt cover
-
Remove three screws from the cover
-
Lift and remove to access brush carriage
-
Turn the belt inward towards the large pulley while lifting out
- If belt is broke or damaged, a replacement should be ordered > Go to Parts & Supplies
-
Place new belt over small pulley first and then slip the belt over the large pulley
- Test the brush roll to make sure it spins freely before moving to next step
-
Replace the brush carriage and screws
-
Push brush carriage back into place making sure the latch locks
-
Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>