PowerForce®/PowerGroom®/PowerTrak® Bagless Upright Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
No > You’ll want to follow the complete list of steps before continuing > Go to No Suction
Yes > Remove & empty Dirt Tank
-
Release the Cyclone Assembly by twisting to the left to disconnect & remove
- Clean Cyclone Assembly of all debris
- Cyclone Assembly can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove Filter Cup
- Remove Filters from Filter Cup
- Filters can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before reinstalling
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>