My ProHeat® ClearView®/Pro-Tech®/PowerSteamer® Pro Upright Carpet Cleaner is Continuously Spraying | Support
- June 7, 2024
- Bissell
Table of Contents
If your machine appears to be continuously spraying, follow these steps to
resolve:
-
When the Hose is wrapped around the tool caddy, if the end of the hose is misplaced it could cause the trigger to be depressed and spray when the machine’s turned on
-
Remove the upper handle of the cleaner
-
Unscrew the two handle screws from the front of the machine and pull the upper handle up and off the cleaner
-
Inside where the upper handle was resting on the machine is a square white spray button
-
With a long tool press the square white button down
-
Did the machine stop spraying?
- Yes > Order a new handle > Go to Parts & Supplies
- No > Visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>