My PowerTrak®/PowerSwift™ Compact Vacuum brush is not turning | Support
- June 7, 2024
- Bissell
Table of Contents
-
Unplug machine
-
Recline the vacuum handle and turn it over to expose the brush
-
Remove the 5 Screws holding on the brush access plate.
-
Clear any debris off the brush and brush ends
-
Inspect the belt for damage
- If damaged, a new belt will need to be ordered
-
The brush should spin easily by hand
- If it does not, a new brush will need to be ordered
-
Place the belt over the belt guard on the brush roll and wrap it around the metal motor pulley
-
Place the brush roll back in the machine through belt, ensuring the end caps line up with the brush housing
-
Spin the brush roll to align the belt on the belt guard
-
Reinstall the brush access plate
- If the brush roll continues not to spin, please visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
-
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>