My ReadyClean®/PowerEase® Upright Carpet Cleaner Brush is Not Turning | Support
- June 7, 2024
- Bissell
Table of Contents
-
Check the Brush ends for debris build-up or broken Belt
-
Turn machine off and unplug from wall outlet
-
Remove Clean Water and Dirty Water Tanks
-
Recline and lay flat to access the brush area
-
With a Phillips head screwdriver, unscrew the 1 Screw from the Belt Cover and remove
-
Pull the Brush up and out of the brush housing, the belt can be removed by sliding off the motor pulley
-
Clean or replace Brush or Belt if necessary
-
Attach Belt to motor pulley and Brush, insert Brush into right side end cap
-
Reattach the left end cap and slide Brush back into place, replace the Belt Cover and screw into place
-
Manually rotate Brush to make sure it rotates freely and that the Belt is aligned properly
-
Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > Visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
-
Your Email
Your Name
Was this answer helpful?
Yes
No