BOLT® Lithium Pet 2 in 1 Cordless Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove Dirt Tank from Hand Vac
- Press button on top of Hand Vac to remove
- Press release button on front of Hand Vac to remove Dirt Tank
-
Turn the Filter removal tab clockwise to operate the Clean-Turn feature (clears excess dirt & debris from filter dropping it into the dirt bin)
-
Pull the Filter from top of Dirt Tank
- Empty debris from Dirt Tank
-
Turn the Filter Assembly tab counter clockwise > Remove Mesh Filter Frame
- Clear debris from Filter & Filter Frame (machine should not be used without Filter & Filter Frame installed)
- Filter and Filter Frame can be rinsed in warm water > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Return Filter into Filter Frame > Turn tab clockwise to lock > Insert into Dirt Tank
-
Attach Dirt Tank to Hand Vac
- You should hear a click when Tank is secure
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Brush/Foot Area
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>