SpinWave Robot Removing/Replacing Battery | Support
- June 7, 2024
- Bissell
Table of Contents
-
Turn the Power Switch OFF
-
Use a Phillips-head screwdriver to remove the two screws and battery cover
-
Gently lift the battery out of the Robot
- Squeeze the tabs on the connection wire to disconnect the battery
-
Connect the new battery and install into battery compartment
- Do not remove the plastic shrink sleeve from battery pack
-
Use a Phillips-head screwdriver to secure the battery cover
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>