BASSPAL F013 Pro WIRELESS SPEAKER User Manual
- June 7, 2024
- BASSPAL
Table of Contents
WATERPROOF
FO 1 3 Pro WIRELESS SPEAKER MP3 PLAYER & SPEAKERPHONE
Quick Start Guide & User Manual
SPECIFICATIONS
- Frequency Response: 120Hz-22 KHz
- Operating Distance: Up to 66 ft
- Battery Capacity: 730mAh
- Power Rating: 8W
- Charging Voltage: DC 5V
- Microphone: Built-in
- Charging Time: Approx.2 Hours
- Playback Time: Up to 8 Hours
- SNR: 85+2dB
- Housing Material: ABS+Silicone
WIRELESS PAIRING
please charge the speaker for 3 hours before using
KEY FUNCTION
- ****Hold the power button for 3 seconds to switch the speaker on and off.
- Short press to switch multiple colors LED lights in turn.
- Breathing light: Gradually change from one color to the others
- Lock only one color (From Dark Blue, Grey. Red, Green, Yellow, Purple to Light Blue)
- Beat-driven light show
- Seven colons change rapidly
- No light.
On-screen Display
- Bluetooth mode: Time, U (Volume range: 0-30)
- FM radio mode: Radio channel, P (Stations), U (Volume range: 0-30)
Connect the antenna for better signal reception.
-
Press and hold to the previous song. Short press to turn down the volume.
Press and hold to the next song. Short press to turn up the volume.
1. Press to play or pause the music. Press to answer or end the phone call. -
Press and hold to reject the incoming calls.
-
In FM radio mode, long press to automatically search for stations, quick click to lock station, long press “+”-” to the station you want to play.
-
In Bluetooth mode, press and hold this button for 3 seconds, adjust “+”-” to set local time, press once to lock the time you have selected.
1. Press to switch the mode between wireless and FM radio.
2. Press and hold to cut off the current wireless connection.
MAIN FEATURE
- wireless 5.0
- Waterproof Grade: IPX7
- Multiple Color LED Light
- LED Display
- Portable Lanyard
- Strong Suction Cup
- Hands-free Talk
- Charging by USB
- Fm Radio with Signal Enhancement Antenna for the first time.
- Make sure the power is off, place the mobile phone or media player device next to it. Press and hold the power button for 3 seconds to pair.LF Bluetooth is not connected within 10 minutes, the product will shut down automatically.
- Activate the wireless feature on the media player device and search for “F013 Pro” from the list for pairing. Enter “0000” if the media device prompts for a password.
- If the connection fails, please refer to the user manual of the media player device for wireless setup. Remove all the excessive unused models from the list of paired devices and start over from step 1 again.
RECHARGING THE DEVICE
The wireless speaker is powered by a built-in rechargeable lithium battery that can be operated by the following steps.
- Release the DC 5V charging port cover.
- Connect the USB charging cable to a standard USB charging port such as a computer or USB charger from the DC 5V socket on F013 Pro.
PACKAGE CONTENTS
- F013 Pro Waterproof Speaker
- USB Charging Cable
- Portable Lanyard
- Dedicated Suction Cup
- Special Antenna
- User Manual
- VIP Card
PRODUCT FEATURE
TROUBLESHOOTING
| Symptoms | Causes | Solutions |
|---|---|---|
| F013 Pro Can’t be powered on | The battery is too low | Recharge the speaker |
| Can’t pair with the speaker | F013 Pro already paired or not in pairing mode |
Refer to “Wireless Pairing Section” on the previous page
Volume too low| A low battery or the volume on F013 Pro and the media player
is not set to maximum| Increase the volume of F013 Pro and media player
FM Radio Signals| 1. To receive an optional FM radio signal, relocate F013
Pro to open enrolment. Remove it from a closed-loop area or other electronic
devices to reduce interference.
2. If applicable, inserting the antenna may enhance the signal.
SAFETY INSTRUCTIONS
- Please make sure the plug cover is tight before dropping it into the water.
- Keep the product away from extreme weather to protect the unit against electric shock, explosion, or bodily injury.
- Do not use the product in an overheated place, such as a stove or an open flame.
- Keep the product out of the reach of children. Do not turn the volume too high to avoid hearing
- Clean the product with a soft cloth and do not use harsh corrosive chemicals. Always unplug from the power source before cleaning.
- Do not puncture or disassemble the exterior surface of the product in any way.
- Do not insert any metal objects into the device to avoid damaging the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>