ITC Ace Courtesy Light Instruction Manual
- June 3, 2024
- ITC
Table of Contents
ITC Ace Courtesy Light Instruction Manual
PARTS / TOOLS NEEDED:
|
|
|
Ace Courtesy Light| Bezel| Power Drill (not provided)| Screws (2)
Safety Instructions
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Do not install any luminaire assembly closer than 6” from any combustible materials.
- Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.
Assembly Instruction
-
Drill a hole in the customer provided mounting surface.
Feed the wires into the hole, and mark the location of the screw holes. (Pre- drill) -
Attach the light using the provided screws.
-
Snap the bezel onto the light. Face the slit towards the surface you would like the light to focus on.
-
Follow the wiring diagram below to wire the light to your system.
Single Color Wiring
RGBW Wiring
*If installing an RGB version the light will not have a white wire.
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>