resideo CBU146 Braukmann User Guide
- June 7, 2024
- resideo
Table of Contents
Break units
Braukmann CBU146
Compact Booster Unit To ensure the quality of drinking water according to EN 1717
APPLICATION
Speed controlled compact booster unit with a vertical high-pressure pump as a
safety device to separate potable water from category 5 fluids according to EN
1717.
Fully automatic, fully wired Compact Booster Unit with a modular design
comprising a single pump system and a buffer tank for the hygienic separation
of potable water and category 5 fluids according to EN 1717, on a common base
frame.
The modular design makes it possible to disconnect modules for installation in
buildings with limited space. The system is switched on and off regulated by
pressure, the flow rate is controlled via a frequency inverter.
APPROVALS
- CE
SPECIAL FEATURES
- Pre-assembled, ready for installation
- No risk of microbial contamination due to hygienic separation of potable water from non-potable water
- Flow rate regulation per frequency inverter
- Easy installation due to modular construction and draining with integrated siphon trap
- Reliable operation due to buffer tank with usable volume according to EN 806-2
TECHNICAL DATA
Separation of systems as a means to protect potable water from being contaminated by fluids of the category 5 according to EN 1717.
Media
Pump Medium:| Non-portable water
Without aggressive, abrasive and solid components
Flow rate:| see Chapter Dimensions
Pumping head:| Adjustable within the range of pump characteristics, preset to
60 m see chapter Dimensions
Pressure values
Nominal pressure p:| PN 16
Inlet pressure:| 1.5 – 8 bar (depending upon the model)
Operating temperatures
Medium temperature:| up to 30 °C
Ambient temperature| up to 40 °C
Specifications
Supply voltage:| 3/PE, AC 400 V, 50 Hz
MATERIALS
Pump
Part:| Material:
Inlet housing| Stainless steel
End housing| Stainless steel
Hydraulics| Stainless steel
Seal| FPM 80
Sliding bearing| Aluminium oxide
Floating ring seal| according to EN 12756
Floating ring| Silicon carbide
Counter ring| Hard coal
Elastomer| EPDM
Hydraulic components
Part:| Material:
Pipeline| Chrome steel
Switching device| Steel, lacquered
Control tank| Connection made of stainless steel
Membrane| Suitable for potable water
Shut-off valves
Part:| Material:
Housing| Spheroidal cast iron
Butterfly disc| Stainless steel
Bellows ring material| EPDM-XV
Buffer tank| Polyethylene
Check valve| Cast steel
CONSTRUCTION
Overview
| **| Components**|
Materials
---|---|---|---
|
1| Speed-controlled compact booster unit with:
• One normal sucking, vertical high-pressure rotary pump with all components
in contact with the medium
• High efficiency motor with frequency inverter, energy efficiency class IE4
according to IEC-CD60034 – 30 ED. 2
• Check valve
• Shut-off valve on the inlet and outlet sides
• Diaphragm expansion vessel on the outlet side as vessel
• Pressure sensor on the pressure side
• Vibration damper between pump and base frame
• Pressure gauge display
• Shut-off valve, lockable
• Piping
• The system is connected to the installation pipeline with G1 ¼”, G2″ or G2
1/2″ (depending on version)
• Base frame| • Stainless steel
• Stainless steel
• Coated steel
2| Self-cooled frequency converter adapted on the motor
• Refer to instructions of frequency inverter|
3| Buffer tank:
• Non-circular, free overflow according to EN 13077, Type AB
• Drainage connection with integrated siphon trap: DN100 for CBU146-32A-060
and CBU146-40A060 DN150 for CBU146-50A-060, CBU146-65A-060, CBU146-65B-060 and
CBU146-80B-060
•Tank volume according to DIN 1988-500 or individual approved
• Potable water backfeed via float valve, suitable for potable water|
| Not depicted components:|
| Switch cabinet consists of:
• Power supply connection via 3/N/PE, AC 400V,50Hz
• Lockable emergency stop main switch (repairswitch)
• LED, green for normal function, yellow for warning, red for alarm and
description text in the display.
• Motor protection device (included in the frequency inverter)
• Terminal strip/clamps with labels for all connections
• Plug connectors to connect easily with the electrical equipment fitted to
the supply container|
| Messages sent via potential-free contact for
• Alarms and warnings
• Pump run indicator|
TRANSPORTATION AND STORAGE
Keep parts in their original packaging and unpack them shortly before use. The following parameters apply during transportation and storage:
| Parameter | Value |
|---|---|
| Environment: | clean, dry and dust free |
| Max. ambient temperature: | up to 40 °C |
| Max. ambient relative humidity: | 60 % * |
*non condensing
TECHNICAL CHARACTERISTICS
Pressure drop characteristics
DIMENSIONS
Overview
| Parameter | Values | |
|---|---|---|
| Length: | [L] | mm |
| Width: | [B] | 800 |
| Height: | [H] | 1185 |
| Weight: | kg |
Noise expectancy values
Refer to pump manual for noise value of the pump.
Authorised environmental conditions
Ambient temperature 5°C …40°C
Relative air humidity max. 60% r.h. at 40 °C ambient temprature
ORDERING INFORMATION
The following tables contain all the information you need to make an order of an item of your choice. When ordering, please always state the type, the ordering or the part number.
Options
|
CBU14632A-060
| CBU14640A-060| CBU14650A-060| CBU14665A-060| CBU14665B-060|
CBU14680B-060
---|---|---|---|---|---|---
Volumetric flow rate Qmin:| m3/h| 0.6| 1.1| 1.6| 4.0| 4.0| 4.6
Volumetric flow rate Qmax:| 7.0| 11.0| 19.0| 28.0| 34.0| 43.0
max. pump head*| m| 86| 89| 85| 81| 100| 86
Connection:
| Inlet| G21/4”| G21/4”| G2″| G2″| G21/2”| G21/2″
Pump| DN32| DN40| DN50| DN65| DN65| DN80
Nominal performance:| P2 kW| 2.2| 3.0| 5.5| 7.5| 11.0| 15.0
Usable volume:| l| 350| 350| 540| 540| 540| 540
- Pump head is depending on the flow rate. See characteristic curves on following pages.
Spare Parts
Overview
| | Description| Dimension|
Part No.
---|---|---|---|---
| 1| Pump
Movitec
| V 0609 B| DN32| 0904149
| V 1008 B| DN40| 0904150
| VF 1506 B| DN50| 0904151
| VF 2504 B| DN65A| 0904152
| VF 2505 B| DN65B| 0904153
| VF 4004-2 B| DN80| 0904154
2| Pressure sensor
| | all| 0904155
3| Pressure gauge
| | all| 0904156
4|
| | all| 0904157
5|
| 1 1/4″| DN32 and DN40| 0904158
| | DN50| 0904159
| | DN65| 0904160
| | DN80| 0904161
6| Shut-off valve
| 1 1/4″| DN32 and DN40| 0904162
| 1 1/2″| DN32 and DN40| 0904163
| | DN50| 0904164
| | DN65| 0904165
| | DN80| 0904166
7| Shut-off valve
| Pump drive 2.2 kW| DN32| 0904167
| Pump drive 3 kW| DN40| 0904168
| Pump drive 5.5 kW| DN50| 0904169
| Pump drive 7.5 kW| DN65A| 0904170
| Pump drive 11 kW| DN65B| 0904171
| Pump drive 15 kW| DN80| 0904172
Manufactured for and on behalf of Pittway Sàrl, Z.A., La Pièce 4, 1180 Rolle, Switzerland by its authorised representative Ademco 1 GmbH
For more information
homecomfort.resideo.com/europe
Ademco 1 GmbH, Hardhofweg 40,
74821 MOSBACH, GERMANY
Phone: +49 6261 810 Fax: +49 6261 81309
Subject to change. EN0H-1376GE23 R0420
© 2020 Resideo Technologies, Inc. All rights reserved.