Bangtong and LI Power Tower Workout Pull Up and Dip Station Instructions

June 7, 2024
Bangtong and LI

Bangtong logo

Instruction
User Guide

The following exercise actions are for reference only

Bangtong and LI Power Tower - user guide

Confirm the contents of the package are all concluded

Bangtong and LI Power Tower - asembly

Bangtong and LI Power Tower - asembly 2

Pull-up fitness equipment assembly steps

1.Please connect (A) Base and (B) Major frame as shown in the figure. Please be careful not to take the wrong orientation for (A) and (B).| Bangtong and
LI Power Tower - asembly 3
---|---
.

2.Assemble (C) U plate as shown in the figure. Note: if in unstable condition, please pay attention to prevent the product from dumping.

| Bangtong and LI Power Tower - asembly4
3.Please assemble connecting pipes (D) and (E) as shown in the figure. Note: if in unstable condition, please pay attention to prevent the product from dumping.| Bangtong and LI Power Tower - asembly 6
4.Assemble (F) crossbars B as shown in the figure. Note: if in unstable condition, please pay attention to prevent the product from duping| Bangtong
and LI Power Tower - asembly7
5.Adjust the height of the expansion pipe (G) and fix it with the knob. Note: if in unstable condition, please pay attention to prevent the product from duping.| Bangtong and LI Power Tower - asembly 8
6.Assemble the (H) cross-bar A as shown in the figure. Caution: be careful not to pinch your hand.| Bangtong and LI Power Tower - asembly
10
7.Assemble (I) armrest as shown in the figure. Caution: be careful not to pinch your hand.| Bangtong and LI Power Tower - asembly
12
8.Please assemble the (J) armrest cushion as shown. Caution: be careful not to pinch your hand.| Bangtong and LI Power Tower -
asembly13
9.Please assemble (K) safety cushions as shown in the figure. Caution: be careful not to pinch your hand.| Bangtong and LI Power Tower -
asembly14

Notification of the product

Bangtong and LI Power Tower - correct motion

  1. Kindly please use this product in-house, since it is designed for households.
  2. Before use, please check that screws, nuts, and other fixing parts have been installed. Confirm that these parts are fixed.
  3. Please wear sports clothes, warm-up before exercise, and stretch for about 5 minutes after exercise to adjust the body well.
  4. This product can also be used with rehabilitation exercises by the elderly, children, people. with disabilities. But keep away from children to prevent danger.
  5. Pay special attention to children. Plastic bags can cause asphyxiation.
  6. Due to the weight and height of the product, please carry or move it by more than two people. Please tip or fall carefully.
  7. Do not place or keep in the following places; An unstable place, such as one that is inclined or slippery, or one that often vibrates. A place of smoke, moisture, or dust. A place with poor ventilation. Extremely hot or cold places. Direct sunlight or close to heating appliances. In case of an earthquake, please keep it in a safe place.
  8. If you have any questions, please feel to contact us by email at any time.

Tightening instructions for non-slip screws

Bangtong and LI Power Tower - instalation

Secure the nuts on either side with two wrenches,One hand doesn’t rotate, the other hand rotates,ln this way, the screw can be turned.
Sand exit instructions
Sand used to clean pipes, No influence on use ,In order not to affect beautiful, You can move it to the back.
Guarantee
We promise a one-year warranty. If there are any problems with the products you received, please feel free to contact us. We will take it seriously. We just want to you know that your satisfaction is always our top priority.

Bangtong and LI Power Tower - QR http://qr17.cn/EFAlnE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals