resideo Braukmann F76S User Guide

Filter
Braukmann
F76S
Reverse rinsing fine filter

APPLICATION

F76S reverse rinsing filters ensure a continuous supply of filtered water. The fine filter prevents the ingress of foreign bodies, for example, rust particles, strands of hemp, and grains of sand, and thus reduces the probability of corrosion. The appliances correspond to the requirements of current DIN/DVGW specifications.
APPROVALS
• DVGW
• SVGW
approval for all filters with 100 μm mesh sizes

SPECIAL FEATURES

• Double Spin Technology for connection sizes
  1/2″ to 1/4″
  – Cartridge with external rotor enabling simultaneous cleaning in lower and upper filter areas
  – Visual function check possible

• Filtered water supplied even during reverse rinsing

• Patented reverse rinsing system – fast and thorough cleaning of the filter with a small amount of water

• Memory ring indicates when next manual reverse rinsing is due

• Automatic reverse rinsing actuator with bayonet connector can be retrofitted

• Large filter surface

• Shock-resistant clear synthetic material filter bowl enables easy checking of filter contamination

• Filter and complete filter bowl are replaceable

• Also available without connections

• Standardized discharge connection

• ACS certified

• All materials are KTW approved

• Approved by TÜV LGA for low noise, Group 1 without limitations

TECHNICAL DATA

Media

Medium:| Drinking water
Connections/Sizes
Connection sizes:| 1/2″ – 2″
Pressure values
Max. operating pressure with clear filter bowl:| 1.5 – 16 bar
Max. operating pressure with red-bronze filter bowl:| 1.5 – 25 bar
Operating temperatures
Operating temperature range medium accord. to EN 1567:| 5 °C – 30 °C
Max. operating temperature medium (clear filter bowl):| 40 °C
Max. operating temperature medium (red bronze filter bowl):| 70 °C
Specifications
Installation position:| Horizontal, with filter bowl

downwards
Note: The filter is constructed for drinking water installations. In the case of a process water application, the filter has to be proven individually.

CONSTRUCTION

Overview

METHOD OF OPERATION
The filter insert is divided into two parts. In the “filtering” position, only the lower, larger section is rinsed through by water jets from outside to inside. The small upper section does not come in contact with unfiltered water. When the ball valve is opened for reverse rinsing, then the whole filter insert is pushed downwards until the water supply to the outer side of the main filter is stopped. Simultaneously, the water flow is opened to the upper part of the filter. The water needed for cleaning the filter passes through the upper filter section, then the rotating impeller and the main filter from inside to outside, i.e. the filter is reverse rinsed with filtered water. In that way, the upper filter is also cleaned by jets from the impeller. The filter automatically switches back to the operating position when the ball valve is closed again. Filters with Double Spin Technology have turbine blades that circulate the water and thereby set the rotor on the upper filter into a rotational motion. The internal impeller rinses off particles that have adhered to the upper ilter at the intersecting points with the rotor.
TRANSPORTATION AND STORAGE
Keep parts in their original packaging and unpack them shortly before use.
The following parameters apply during transportation and storage:

*non condensing

Installation Example

TECHNICAL CHARACTERISTICS

kvs-Values

DIMENSIONS

Overview

Double Spin Technology:

| Yes| Yes| Yes| Yes| No| No

Note All dimensions in mm unless stated otherwise.

The following tables contain all the information you need to make an order of an item of your choice. When ordering, please always state the type, the ordering or the part number.

Options
The filter is available in the following sizes: 1 3/2″,/4″, 1″, 111/4″, 1/2″ and 2″.
• standard
– not available

| F76S-…AA| F76S-…AAM| F76S-…EA
---|---|---|---
Connection type:| Threaded male connections, filter mesh size 100  μm| •| –| –
| Red bronze filter bowl, threaded male connections, filter mesh size 100 μm| –| •| –
| Without connections, filter mesh size 100 μm| –| –| •

Note: … = space holder for connection size
Note: Ordering number example for 1″ and type AA valve: F76S-1AA
Note: Filters with other mesh widths available on request

| Description| | Dimension| Part No.
---|---|---|---|---

| Z11S| Automatic reverse rinsing actuator

For automatic filter cleaning at presettable intervals

| 230 V, 50/60 Hz, 10 with molded Schuko electrical plug 24 V, 50/60 Hz, 10 without    electrical plug 230 V, 50/60 Hz, 10 with molded Type 12 electrical plug for Switzerland| Z11S-A

Z11S-B

Z11S-Z

VST06B| Connection set Solder connections

| | 1/2″
3/4″
1″
11/4″
11/2″
2″| VST06-1/2B
VST06-3/4B
VST06-1B
VST06-11/4B
VST06-11/2B
VST06-2B
FT09RS| Red-bronze filter bowl
For temperatures up to 70°C and operating pressures up to 25.0 bar

| | 11/2″ – 1/4″
11/2″ – 2″| FT09RS-1A
FT09RS-11/2A
DDS76| Differential pressure switch| |

| | 1/2″ + 3/4″
1″ + 1 1/4″
1 1/2″ + 2″| DDS76-1/2
DDS76-1
DDS76-11/2
ZR10K| Double ring wrench for removing the filter bowl
| | | 1/2″ +3/4″
11″ + 1/4″
11/2″ + 2″| ZR10K-3/4
ZR10K-1
ZR10K-11/2

Spare Parts
F76S Fine Filters from 2007 onwards

| | Description| Dimension| Part No.
---|---|---|---|---
1| Pressure gauge
| 0 – 16 bar| M76K-A16
2a| Connection set threaded connection
| 1/2″
3/4″
1″
11/4″
11/2″
2″| VST06-1/2A
VST06-3/4A
VST06-1A
VST06-11/4A
VST06-11/2A
VST06-2A
2| Union seal washer (10 pcs.)| 1/2″ +3/4″
1″
11/4″
11/2″
2″| 0901444
0901445
0901446
0901447
0901448
3| Filter insert complete, filter mesh 100 μm
| 1/2″ -3/4″
1″ – 1 /4″
11/2″ – 2″| AF11S-1/2A
AF11S-1A
AF11S-11/2A
4| Filter insert complete, for filters with Double Spin
Technology, Filter mesh 100 μm
| 1  /2″ – 3/4″
1″ – 1 /4″| AF11DS-1/2A
AF11DS-1A
5| Clear filter bowl
| 1/2″ – 11/4″
11/2″ – 2″| KF11S-1A
KF11S-11/2A
6| Red bronze filter bowl
| 1/2″ – 1/4″
11/2″ – 2″| FT09RS-1A
FT09RS-11/
2A
7| O-ring set (10 pcs.)
| 11/2″ + 1/4″
11/2″ + 2″| 0900747
0900748
8| Drain connector
| 1/2″ – 2″| AA76-1/2A
9| Ball valve complete
| 1/2″ – 2″| KH11S-1A
10| Spring
| 11/2″ – 1/4 ”
11/2″ – 2 “| 2074900
2159400

*The filter guide (either with double spin or without double spin feature) is included in the packaging of the replacement filter inserts (AF11DS and AF11S) only for the sizes
1 /2″ up to 11/4″!

Manufactured for
and on behalf of
Pittway Sàrl, Z.A., La Pièce 4,
1180 Rolle, Switzerland by its authorized representative
Ademco 1 GmbH

For more information
homecomfort.resideo.com/europe
Ademco 1 GmbH, Hardhofweg 40,
74821 MOSBACH, GERMANY
Phone: +49 6261 810
Fax: +49 6261 81309

© 2020 Resideo Technologies, Inc. All rights reserved.
Subject to change. EN0H-1110GE23 R0420

References

• Comfort Europe from Resideo
• Comfort Europe from Resideo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>