controller gear Razer Quick Charging Stand for Xbox User Manual
- June 7, 2024
- controller gear
Table of Contents
Razer Quick Charging Stand for Xbox
User Manual
1. Connect Power Cable
2. Place Rechargeable Battery in your controller
3. Attach the included Battery Cover.
4. Place on Stand to Charge
Works with
Xbox Series X | S
Contents:
- 1 Charging Stand
- 1 Rechargeable Battery
- 1 Battery Cover
- 16 Foot Charging Cable
Use:
- Connect the DC power jack to the back of the charging stand and the 2 prong AC plug into an open power outlet. When powered on, the LED on the front of the charging stand flashes 3 times.
- Place the rechargeable battery into the Xbox One Controller.
- Attach the included battery cover.
- Place the Xbox One controller on the charging stand. When the controller is placed on the charging stand, the LED turns orange to indicate the controller is charging.
- Once the controller is fully charged, the LED turns white.
- While you play, look for the on-screen battery indicator to monitor your current battery power.
Battery: 1100mAh 2.4V
Input: 110-220 AC
Output: 5V 1A
Model # CGXCS
Class 2 Battery Charger
Input: 5VDC 1A
Output: 3VDC 550mA
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) the device must accept any interference received, including interference that may cause undesired operation. The equipment has been tested and complies with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Warranty: 1 Year Limited Warranty: visit controllergear.com/support to register your product and additional warranty details.
Troubleshooting: For tips on troubleshooting your charging stand, visit controllergear.com/support.
Customer Service: Razer Inc. 9 Pasteur, Suite 100, Irvine, CA 92618, USA
Microsoft, Xbox, Xbox “Sphere” Design, Xbox Series X|S, Xbox One, Windows are
trademarks of the Microsoft group of companies.
All other trademarks are the property of their respective owners.
© 2021 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, “For Gamers, By Gamers.” are trademarksor registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks are the property of their respective owners. Actual product may differ from pictures. Warranty not valid outside of product’s intended region.