BISSELL Pet Hair Eraser Slim Cordless Vacuum Cleaning Filters Instruction Manual
- June 7, 2024
- Bissell
Table of Contents
BISSELL Pet Hair Eraser Slim Cordless Vacuum Cleaning Filters Instruction Manual
Pet Hair Eraser Slim Cordless Vacuum Cleaning Filters | Support
Maintaining your filters is very important to the function of your
vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
- Remove Dirt Tank from Hand Vac
- Grip the top portion of tank and pull up to remove the separator (the bottom ring of the separator will activate to “wipe” debris from screen & deposit into tank)
o Clean debris from Separator
o Empty debris from Dirt Tank
• Twist the top to remove Filter from Separator
o Remove Pre Motor Filter and clear debris (machine should not be used without
Filters installed)
• Pre Motor Filter can be rinsed in warm water > Allow to completely air dry
(24 – 48 hours) before reinstalling
• Insert the Filter with tag towards the Filter Frame
• Insert Filter Frame into Separator > Separator into Dirt Tank
• Attach Dirt Tank to Hand Vac
o You should hear a click when Tank is secure
• The Post Motor Filter is located on the back of the Hand Vac
o Pinch the latch on the back of the Hand Vac > Remove Filter Cover
o Press up on bottom tab to pull Filter out
o Post Motor Filter can be rinsed in warm water > Allow to completely air dry
(24 – 48 hours) before reinstalling
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>