URUAV UZ80 Kit Micro Toothpick Style FPV Drone Installation Guide
- June 7, 2024
- URUAV
Table of Contents
URUAV UZ80 Kit Micro Toothpick Style FPV Drone Installation Guide
Tools needed and spare parts list
-
Install the camera to the mount holder with M1.2×5, you can put some hot melt glue to fixed the camera
-
Install the camera and mount holder to the canopy with M1.3×4 screws
-
Install the motors to the frame with M1.4×3 screws
-
Motor directioan
-
Make M2x10 screws through the frame, and then use M2 nylon nuts to fix
-
Put the rubber damping ball on the M2x10 screw to install the flight controller
-
Insert the wire plug of the camera to the socket of the flight controller and then use M2 Nylon nut to fixed the canopy
-
Insert the wire plug of the motor to the flight controller
Flight controller connect ion diagram
Bind procedure
UZ80 Frsky version bind procedure: (Receiver mode “Frsky_D” and choose “Frsky
D8” for your radio transmitter)
Plug USB and then press the bind button for 1 second ,the Red LED on the top
of the flight controller will getting to be solid , this indicate the receiver
is
in bind mode. Or Plug USB and then connect betaflight configurator. Go to CLI
command then enter “frsky_bind”, the receiver would get into bind mode too.
Make your Frsky transmitter get into bind mode . If bind is successful the red
LED will starting to blink. The red LED wouldn’t blinking when binding with
some new ACCESS firmware frsky radio , but the bind is actual successful ,
need to go to CLI command and enter “save”to finish the binding .
UZ80 Flysky version bind procedure: (Receiver mode “A7105_FLYSKY_2A” and
choose “AFHDS2A” for your radio transmitter Press and hold the bind button for
1 second ,then plug USB, the Red LED at the bottom of the flight controller
will blinking fast , this indicate the receiver is in bind mode.
Make your Flysky transmitter get into bind mode . If bind is successful the
red led will getting to be solid.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>