LG HBS-FN7 TONE Free Bluetooth Stereo Headset Owner’s Manual
- June 7, 2024
- LG
Table of Contents
USER MANUAL
Bluetooth® LG Stereo Headset
HBS-FN7
https://apps.apple.com/app/lg-tone-talk-free/id1498881097|
https://play.google.com/store/apps/details?id=com.lge.tonentalkplus.tonentalkfree
---|---
Rev 1.0 RU www.lg.com
Contact office for compliance of this product: LG Electronics European Shared Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands
NOTE: For the best performance and to prevent any damage to or misuse of
the headset, please read all of the information carefully prior to using the
headset. Any modifications or changes to this manual due to typographical
errors or inaccuracies of stated information shall only be made by LG
Electronics Inc.
HBS-FN7
www.lg.com Copyright © 2021 LG Electronics Inc. All
Rights Reserved
The LG TONE Free (HBS-FN7) is a lightweight wireless headset that uses Bluetooth technology. This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free Bluetooth Profile.
Safety Precautions
The following safety precautions are provided to prevent any unexpected
accident or damage. Please familiarize yourself with the safety precautions.
The safety precautions are classified into “WARNING” and “CAUTION”.
WARNING: Failing to comply with the instructions may result in serious
injury or death.
CAUTION: Failing to comply with the instructions may result in minor
injury or product damage.
WARNING
Do not drop the product from a high place. Make sure there is no water,
alcohol, or benzene in contact with the product. Do not store the product in a
wet or dusty place. Do not place heavy objects on the product. This product is
waterproof to the IPX4 level (daily life waterproof). (The IPX4 waterproof
rating applies to the earbud product only.) Do not put the product under the
water or use it in a humid location such as a bathroom.
CAUTION
Do not disassemble, adjust, or repair the product arbitrarily. Do not place
the product near excessive heat or flammable material. The product may be
damaged if an incompatible charger is used. Make sure that an infant or child
does not swallow a magnet or a small component of the product.
Make sure that foreign objects do not enter the charger’s connectors (charging
port and power plug). Failure to do so may result in fire or electric shock.
If you have a medical device implanted, contact your doctor before using this
device. This product has a built-in battery, and the battery cannot be removed
or replaced arbitrarily. For your safety, do not remove the battery
incorporated in the product. If you arbitrarily replace the battery or don’t
replace it correctly, it may explode. The lithium-ion battery is a hazardous
component that can cause injury. Battery replacement by an unqualified
professional can cause damage to your device. Do not discard the battery
arbitrarily. Follow the local procedure for discarding batteries. Disposal of
a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion.
A battery subjected to extremely low air pressure may result in an explosion
or the leakage of flammable liquid or gas.
NOTE If the product is exposed to excessive sweat, clean the product. Keep the
earbuds clean.
HD Speaker
If the communication network of the device you are connecting to supports HD
Voice Calling, you can enjoy making voice calls and listening to music in high
definition.
Product Components
| LG TONE Free™ Earbuds (medium eargels installed) UV Charging Case
---|---
| Extra Ear Gels (small & large)
| USB Type C™ Charging Cable
| Reference Guide
| User Manual
| Warranty Card
| WEEE Card
(Europe Only)
NOTE: Actual product design may differ from images shown in the manual.
CAUTION Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void the warranty.
Use the USB Type CTM cable provided with the product.
Overview
Charging Case
Earbuds
*The appearance and specifications of the actual product may differ depending on the model. 4
Pairing and Connecting
Fast Pair
-
Turn on the Bluetooth function on the mobile phone or the device to be connected.
-
Open the cover of the charging case with the earbuds mounted on the case. Press the pairing button for 3 to 5 seconds until the blue battery status lamp blinks.
![Panasonic F-PZT175H Air Purifier-[LG HBS-FN7](https://manuals.plus/wp- content/uploads/2021/09/Panasonic-F-PZT175H-Air-Purifier-LG-HBS-FN7.png) -
When the Fast Pair connection pop-up appears on the top area of the mobile phone screen, tap it to connect. (It only supports AndroidTM 6.0 or higher, and requires configuring Bluetooth and location information settings of the mobile device.)
-
If the pop-up does not appear, select [LG HBS-FN7] from the Bluetooth menu on the mobile phone and connect it (for users of iOS or Android 5.0 or lower versions).
NOTE: To connect with another device, perform the above procedure again.
CAUTION: In the list of Bluetooth-connected devices, LG HBS-FN7_LE is not
the correct model name for the connection. Check the model name in use and
connect with the model name without “LE”.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Wearing Earbuds
-
Separate the earbuds from the charging case and adjust them so that they fit comfortably in your ears.
NOTE: You can easily separate the earbuds from the charging case by turning the part with a dotted line in the image below to left or right and lifting the earbuds. -
When you wear the earbuds, you will hear a wearing detection alarm
Playing Music
Function | Description |
---|---|
Play / Pause | : Touch the left or right earbud once. |
Adjusting the Volume | : Touch the left(Decrease volume) or right(Increase |
volume) earbud twice.
Play Next| : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the touchpad settings of the LG TONE Free app.
Mobile Calling Functions
Function | Status | Description |
---|---|---|
Answering Calls | Ringing | Touch the left or right earbud once. |
Ending Calls | Talking | Touch the left or right earbud twice. |
Making Calls | Idle | If you make a call using a mobile phone, the call is |
automatically connected to the headset.
Receiving Calls while on the Phone| Talking| If you touch the left or right
earbud once, the current call will go on hold, and you will be able to answer
an incoming call. If the previous call is on hold, you can finish the current
call on the mobile phone. (It works differently depending on the mobile phone
settings.)
Rejecting Calls| Ringing| Touch and hold the left or right earbud.
Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
Listen to the Ambient Sound (LAS)
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
Active Noise Cancellation (ANC)
The Active Noise Cancellation (ANC) function blocks any ambient sound. So, you
can use the function to listen to music or watch a video without interference.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS model.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the
time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or
being on the phone.
NOTE: ANC is an acronym for Active Noise Cancellation.
CAUTION: When the LAS mode is enabled, you may hear the ambient sound
become loud suddenly. When using the ANC function outdoors, pay attention to
the surrounding environment for safety.
UVnano
The charging case has a built-in UVnano LED, which allows you to use your
earbuds cleanly.
If you charge the earbuds wired after mounting them on the charging case and
closing the cover, the UVnano LED operates for 10 minutes.
*** UVnano is a compound word derived from the words UV and its unit,
nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of Staphylococcus
aureus and Escherichia coli inside the earbud hole. In the case of a white
product, discoloring may occur in the contact area of the UVnano LED, but it
does not affect the product function. The UVnano LED does not turn on while
charging wirelessly.
CAUTION:** Be aware that the temperature of the earbuds may rise while the
UVnano LED is on.
Charging
Wired Charging
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc. 9
Wireless Charging
Align the bottom center of the charging case with the center of the wireless
charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the charging
case.
Checking the Battery Status
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed. If the
earbuds are mounted in the charging case while plugged in, the UVnano process
will commence for ten minutes. Once this process is complete, the charging
case’s battery status will be displayed.
Battery Status Indicator| Remaining Battery (charger not connected)| Charging
State (charger connected)
---|---|---
Red| 20% or lower| Charging
Yellow| 20% – 80%| –
Green| 80% or higher| Fully charged
NOTE : When the charging case lid is closed, the charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the charging
case charged at all times as the earbuds are not able to be turned on and
turned off independently.
Battery Status Indicator
Status
|
Description
---|---
Bluetooth Search Mode| The battery status indicator flashes in blue.
Battery below 20%| The battery status indicator turns on and off in red.
Battery 20% – 80%| The battery status indicator turns on and off in yellow.
Battery 80% or more| The battery status indicator turns on and off in green.
When there is a problem while charging| The battery status indicator flashes
in red.
Charging (charger connected)| The battery status indicator turns on in red.
Charging complete (charger connected)| The battery status indicator turns on
in green.
Out of Range
If the device connected to the product is out of effective communication
range, the communication signal becomes weak and the communication is lost.
The effective communication range may vary depending on surrounding and other
conditions.
If the device comes back within effective communication range, the product
automatically reconnects to the device. If the device is not automatically
reconnected, touch the left or right earbu d once to connect them.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud Battery, Voice
Alert, Change Equalizer Mode, Check Last Connected Location Information, and
Find My Earbuds functions. Check out the app for more details. To install the
“LG TONE Free” app, search LG TONE Free in the Google Play Store or App Store
or scan the QR code below.
It supports Android 5.0 or higher and iOS 11 or higher.
https://play.google.com/store/apps/details?id=com.lge.tonentalkplus.tonentalkfree|
https://apps.apple.com/app/lg-tone-talk-free/id1498881097
---|---
Troubleshooting
If you see any of the following symptoms while using the product, make sure to recheck it. It may not be a malfunction.
Symptom
|
Cause and Solution
---|---
The power does not turn on| Check the battery level and charge it.
If unable to make a call with
earbuds
| If the mobile phone does not support a headset and hands-free functions, you
cannot use the calling features. Check the battery level and charge it.
If unable to register earbuds to mobile phone| Check whether earbuds are
turned on.
Check if the charging case of earbuds is in search mode.
– Press the pairing button on the charging case to switch to search mode.
If you replaced the earbuds or there is a problem with the operation| Put the earbuds in the charging case and, with the case open, press the pairing button for 10 seconds or more.
– The factory reset proceeds while the battery status indicator on the charging case flashes red. Please reconnect the device after a factory reset.
Specifications and Features
Item | Comments |
---|---|
Bluetooth Specifications | V 5.0 (Headset/Hands-Free/A2DP/AVRCP) |
Battery | Earbud : 3.7 V / 55 mAh, Lithium-ion |
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time Earbuds & With Charging case (ANC ON)| Up to 7 & Up to 21
hours (Up to 5 / Up to 15 hours)*
Charging Time| Earbud: within an hour / Charging case: within 2 hours Fast
Charging: 5 min charge for up to 60 min playtime ※ When charging wired at room
temperature
Rated Input Voltage| Earbud: DC 5 V, 110 mA
Charging case: DC 5 V, 500 mA
Operating Temperature| 0°C (+32°F) ~ +40°C (+104°F)
Dimensions (mm) /
Weight (g)
| Earbud : 16.2 mm (W) X 32.7 mm (L) X 26.8 mm (H) / 5.6 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X 27.6 mm (H) / 39 g
Frequency range| 2402 MHz to 2480 MHz
Output power (Max.)| 10 dBm
***** Duration of use may vary depending on the connected mobile device,
features being used, settings, signal strength, operating temperature,
frequency band, and other methods of use. The fast charging feature does not
apply when the charging case is placed on a wireless charging device such as a
pad.
Wireless charging feature charges at a slower rate due to less power being
transmitted to the charging case.
Declaration of Confirmation
FCC NOTICE TO USERS :
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the manufacturer (or partly
responsible) for compliance could void the user’s authority to operate the
equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is
connected. – Consult the dealer or an experienced radio/TV technician for
help.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is permitted. Any change
to the antenna or the device could result in the device exceeding the RF
exposure requirements and void user’s authority to operate the device.
DECLARATION OF CONFORMITY: Hereby, LG Electronics declares that this headset is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be found at http://www.lg.com/global/declaration
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide. Android, Google Play, the Google Play logo, and other related marks and logos are trademarks of Google LLC.
FCC ID: ZNFHBSFN7
Additional Information
1. Radiofrequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When in
operation, it communicates with a Bluetooth-equipped mobile device by
receiving and transmitting radio frequency (RF) electromagnetic fields
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth Headset
is designed to operate in compliance with the RF exposure guidelines and
limits set by national authorities and international health agencies when used
with any compatible LG Electronics mobile phone.
2. Bluetooth Connection Precautions
The following environments affect the range and reception of Bluetooth
signals:
– When walls, metal, human bodies or other obstacles exist between the
Bluetooth device and the connected device
– When equipment that uses 2.4 GHz frequency signals (Wireless LANs, wireless
phones, micro wave ovens etc.) is placed near the devices being used
– When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specifications and performance
of the device
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive
atmosphere. It is rare, but your electronic device could generate sparks.
Sparks in such areas could cause an explosion or fire resulting in bodily
injury or even death. Areas with a potentially explosive atmosphere are often,
but not always, clearly marked.
4. Battery information
A rechargeable battery has a long service life if treated properly. A new
battery or one that has not been used for a long period of time could have
reduced capacity the first few times it is used. Do not expose the battery to
extreme temperatures, never above +50° or below -10°. For maximum battery
capacity, use the battery in room temperature. If the battery is used in low
temperatures, the battery capacity will be reduced. The battery can only be
charged in temperatures between 0° and +45°.
Removal of waste batteries and accumulators (Product with embedded battery
ONLY)
– In case this product contains a battery incorporated within the product that
cannot be readily removed by end-users, LG recommends that only qualified
professionals remove the battery, either for replacement or for recycling at
the end of this product’s working life. To prevent damage to the product, and
for their own safety, users should not attempt to remove the battery and
should contact LG Service Helpline, or other independent service providers for
advice.
– Removal of the battery will involve the dismantling of the product case,
disconnection of the electrical cables/contacts, and careful extraction of the
battery cell using specialized tools. If you need the instructions for
qualified professionals on how to remove the battery safely, please visit
http://www.lge.com/global/sustainability/environment/take-back-
recycling.
5. Recycling the battery in your Bluetooth Headset
The battery in your Bluetooth Headset must be disposed of properly and should
never be placed in municipal waste.
Disposal of waste batteries/accumulators
- This symbol may be combined with chemical symbols for mercury (Hg), cadmium (Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead.
- All batteries/accumulators should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
- The correct disposal of your old batteries/accumulators will help to prevent potential negative consequences for the environment, animal and human health.
- For more detailed information about the disposal of your old batteries/accumulators, please contact your city office, waste disposal service or the shop where you purchased the product. (http://www.lg.com/global/sustainability/environment/takeback-recycling/global-network-europe)
6. Conditions
– The warranty is valid only if the original receipt issued to the original
purchaser by the dealer, specifying the date of purchase and serial number, is
presented with the product to be repaired or replaced. LG Electronics reserves
the right to refuse warranty service if this information has been removed or
changed after the original purchase of the product from the dealer.
– If LG Electronics repairs or replaces the product, the repaired or replaced
product shall be warranted for the remaining time of the original warranty
period or for ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the property of
LG Electronics.
– This Warranty does not cover any failure of the product due to normal wear
and tear, or due to misuse, including but not limited to use in other than the
normal and customary manner, in accordance with instructions for use and
maintenance of the product. Nor does this warranty cover any failure of the
product due to accident, modification or adjustment, acts of God or damage
resulting from the liquid.
– This warranty does not cover product failures due to improper repair
installations, modifications or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will void
the warranty.
Limited Warranty
SUBJECT TO THE CONDITIONS OF THIS LIMITED WARRANTY, LG ELECTRONICS WARRANTS
THIS PRODUCT TO BE FREE FROM DEFECTS IN DESIGN, MATERIAL, AND WORKMANSHIP AT
THE TIME OF ITS ORIGINAL PURCHASE BY A CONSUMER, AND FOR A SUBSEQUENT PERIOD
OF ONE (1) YEAR. SHOULD YOUR PRODUCT NEED WARRANTY SERVICE, PLEASE RETURN IT
TO THE DEALER FROM WHOM IT WAS PURCHASED OR CONTACT YOUR LOCAL LG ELECTRONICS
CONTACT CENTER TO GET FURTHER INFORMATION.
Important safety information
Avoiding hearing damage
Permanent hearing loss may occur if you use your Headset at a high volume. Set
the volume to a safe level. You can adapt over time to a higher volume of
sound that may sound normal but can be damaging to your hearing. If you
experience ringing in your ears or muffled speech, stop listening and have
your hearing checked. The louder the volume, the less time is required before
your hearing could be affected. Hearing experts suggest that to protect your
hearing:
- Limit the amount of time you use Headset at high volume.
- Avoid turning up the volume to block out noisy surroundings.
Turn the volume down if you can’t hear people speaking near you.
Please refer to your handset user guide for more information on how to adjust listening levels on your handset.
Using headsets safely
Use of a Headset to listen to music while operating a vehicle is not
recommended and is illegal in some areas. Be careful and attentive while
driving. Stop using this device if you find it disruptive or distracting while
operating any type of vehicle or performing any other activity that requires
your full attention.
Customs Union Technical Regulations
Manufacturer Info
LG ELECTRONICS INC 128, YEOUI-DAERO, YEONGDUNGPO-GU, SEOUL, KOREA
Production Plants Area C5-4 Trang Due IZ, AnDuong Dist, Hai Phong City,
VietNam
Production Date Production date indicated on the box
Additional information
(1) Storage
Do not install or store the appliance outdoors or in places exposed to direct
weather conditions (direct sunlight, wind, rain or temperatures below zero
degrees)
(2) Transportation
The product is transported by any means of transport in accordance with the
rules of transportation of goods, operating in the this type of
transportation. · Transportation must be carried out under conditions
excluding damage. · Do not expose the product to impact loads during loading
and unloading.
(3) Realization
· The sale of products is performed in accordance with the rules established
by the current legislation of the country in which it is realized.
(4) Recycling
- Old electrical products can contain hazardous substances so correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. Your old appliance may contain reusable parts that could be used to repair other products and other valuable materials that can be recycled to conserve limited resources.
- For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
Disposal of your old appliance
- This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream.
- Old electrical products can contain hazardous substances so correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. Your old appliance may contain reusable parts that could be used to repair other products and other valuable materials that can be recycled to conserve limited resources.
- You can take your appliance either to the shop where you purchased the product, or contact your local government waste office for details of your nearest authorized WEEE collection point. For the most up-to-date information for your country please see www.lg.com/global/recycling.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open-source
licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers, and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
media, shipping, and handling) upon email request to
opensource@lge.com.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
Ukraine Restriction of Hazardous Substances The equipment complies with requirements of the Technical Regulation, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
RISK GROUP 2
| CAUTION: UV EMITTED FROM THIS PRODUCT. EYE OR SKIN IRRITATION MAY
RESULT FROM EXPOSURE. USE APPROPRIATE SHIELDING.
WARNING: WHEN OPENING THE CHARGING CASE OR WIRELESS CHARGING, THE UV
FUNCTION DOES NOT WORK.
References
- Indian National Congress
- LG Open Source
- LG Electronics & Home Appliances | Shop Now | LG USA
- LG Electronics & Home Appliances | Shop Now | LG USA
- Consumer Electronics | LG Global
- CeDoc
- LG Open Source
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>