TELLUR TLL331281 Wi-Fi Smoke Sensor User Manual
- June 7, 2024
- Tellur
Table of Contents
Wi-Fi Smoke Sensor
User Manual
TLL331281
For other languages, please visit
smart.tellur.com
INTO YOUR FUTURE
Thank you for choosing Tellur!
To ensure optimum performance and safety, please read this user manual
carefully before using the product. Keep this user manual safe for future
references.
WHAT’S IN THE BOX
Please consult this checklist for all parts.
1 x Tellur Smoke sensor
1 x CR123A battery
1 x 3M tape
2 x Screws
2 x Tapping screws
PRODUCT OVERVIEW
Increase your sense of security with Tellur’s WiFi Smart Smoke Sensor.
Having an intelligent double-checking algorithm, the device senses smoke and
temperature changes and triggers the alarm.
When it detects smoke, the sensor alerts you through an acoustic alarm, a
light indicator and a push notification is sent to your smartphone. You will
also be notified on your smartphone when the batteries are running low or when
someone tries to dismount the device.
The WiFi Smart Smoke Sensor works with a CR123A DC 3V battery (included) and
has a low energy consumption.
The sensor integrates perfectly in the Smart Home ecosystem and allows you to
check its working status and history records by simply accessing the Tellur
Smart app from your smartphone.
PRODUCT FEATURES
Detects smoke & temperature change and triggers the alarm.
Multiple types of alarms: light indicator, high-decibel acoustic alarm & push
notification.
Low battery & tamper notifications.
Compatible with Tellur Smart app, perfectly integrated in the Smart Home
ecosystem.
Works with a CR123A DC 3V battery (included) with low energy consumption.
Working in 802.11 b/g/n 2.4GHz wireless network (no hub required).
WiFi network configuration with EZ (Smart Config) and AP (Access Point) mode.
Share the device with your family.
Mounting with adhesive tape or screw.
PRODUCT DIAGRAM
PRODUCT SPECIFICATIONS
Power supply: 1 x CR123A DC 3V (included)
Battery life: Up to 3 years
Detection range: Up to 50 m2
Alarm level: 85dB @ 3 meters
Push notifications: Yes
Tamper notifications: Yes
Low battery notifications: Yes
History record: Yes
Self test: Yes
WiFi standard: IEEE 802.11b/g/n
Supported WiFi network: 2.4GHz
Color: White
Housing material: PC + ABS
Installation method: Screws or 3M tape
Operating temperature: -10°C – +55°C
Operating humidity: 5% – 95% RH
Product dimensions: 70 x 70 x 29mm
Product weight: 88 gr
INSTALL APP AND REGISTER AN ACCOUNT
Download the Tellur Smart App for both iOS and Android OS.
Scan the QR code to download Tellur Smart App
https://smartapp.tuya.com/tllsmart
Set up router
This device only supports a 2.4GHz frequency band router, does not support
5GHz frequency band router, please set the relevant parameters of the router
before WiFi configuration, WiFi passwords do not include special characters
such as ~!@#$%^&*(). When the device is configured in WiFi, the mobile phone
and device are as close as to the router, which can speed up the configuration
of the device.
ADD AND REMOVE DEVICE IN YOUR APP ACCOUNT
6.1 Open the app and login, Click Add Devices > Security and Sensor > Smoke Detector (Wi-Fi) to start the device adding.
6.2 Press the device button for 5 seconds to enter the Wi-Fi configuration
state (fast blinking in EZ mode or slow blinking in AP mode).
6.3 Input the Wi-Fi SSID and password of the Wi-Fi network that the device is
going to work with, then waiting around 30 seconds for the Wi-Fi configuration
finished until a device is successfully added;
6.4 Change the device name and share it within the APP account as you want.
6.5 Click the device just added to launch the device state UI to check the
state, battery level, record history and the APP notification setting.
Note:
Make sure the device and APP work in the same Wi-Fi configuration mode, both in EZ mode or in AP mode.
In some cases that the EZ mode is not working Wi-Fi network, AP mode is the only option.
• EZ mode:
make sure your APP is internet available and the device and APP both work in
EZ mode. Then input the Wi-Fi network password to finish the device adding. If
you want to change the Wi-Fi network, please check the “Change network” in
APP;
• AP mode:
Click AP Mode, make sure your APP is internet available, and the device and
APP both work in AP mode. Confirm to input the SSID and Password of Wi-Fi
network, then select the Device AP name with Tellur Smart App in Wi-Fi list
then back to App to finish the device adding.
After the device is successfully added to the APP account, the LED will turn off. Using the methods mentioned in the LED indicator to check the device is successfully added or not. If not, please repeat the Device adding again.
6.6 Remove device
-
Click “Remove Device” to remove this device from your account; click “Restore manufacturer Defaults” to remove the device from our account and clear the historical record in the cloud.
-
After removing the device or Restore manufacturer defaults from the APP, repeating the Device add steps to your account;
PRODUCT INSTALLATION
- The product is only for indoor ceiling installation;
- It is recommended to install this product in each corridor outside the room. If more rooms face different corridors, it is suggested to install the product in each corridor;
- For the room or corridor that is longer than 12m, it is recommended to install a product at each end;
- If your house has multiple floors, it is recommended to install it on every floor, including the loft and the basement.
- Keep a distance of at least 50cm from the lamps or decorations;
Keep at least 15cm away from the corner. The installation position should be 15~30cm from the corner as shown in figure 1;
If the ceiling is inclined, as the top is a “dead air” area, install the device on the top of the horizontal 90cm, as shown in figure 2
- Do not install in the bathroom, or in places accessible to water or water droplets.
- Do not install in an area with a temperature below -10ºC or above 55ºC.
- Do not install in very ventilated areas, such as near air conditioners, ceiling fans, or fresh air vent.
- Do not install in the place where burning particles are generated during combustion, such as the kitchen, near the stove or the exhaust gas from the garage.
- Screw installation is recommended. The user is responsible for any accidents and safety incidents caused by poor installation.
Installation Method I (Screw installation)
-
Mark the center point of the two holes in the bracket at the selected installation place on the ceiling or wall, drill two holes in the mark with the drill bit and insert the tapping screw to make it flush with the ceiling or wall.
(Note: keep the sensor away from dust when drilling) -
Use the two screws in the accessories kit to install the bracket in position.
- As shown in the figure below, align the product body with the bracket at an angle by referring to the “Product installation alignment icon on the bracket. Rotate the product body clockwise until the product is securely fixed into the bracket.
Product installation alignment icon side view
Product installation alignment icon front view
Installation Method II (3M tape installation)
- As shown in the figure below, align the product body with the bracket at an angle by referring to the “Product installation alignment icon ” on the bracket. Rotate the product body clockwise until the product is securely fixed into the bracket.
Product installation alignment icon side view
Product installation alignment icon back view
- Use the 3M tape from the accessories kit, stick it on the back of the bracket and place the product in the desired position.
Alarm and self-test function
In a normal working state, the LED will flash RED every 1 minute. If smoke is
detected, the RED LED flashes quickly and a sound prompt will be activated.
For a self-test press the Test/Mute button once. The sensor will make a prompt
sound and the LED will flash RED, GREEN and YELLOW, meaning the device is
working properly. During self-test, the sensor will also send a notification to
the Tellur Smart app.
! Important notes
-The sensor will self-check for online status every 10 hours.
-The sensor will send an audible, visual, and notification on the app when smoke is detected.
-Do not test the sensor with open flame to avoid damaging the product.
-If the alarm is sent during the test, it warns you of potential danger and needs immediate attention. Never ignore any alarm, it may lead to casualties or property damage.
-If the sensor fails to self-test please refer to the “Troubleshooting” part of the manual. If the fault can not be fixed, the product should be replaced immediately.
Mute function
In the eventuality of a non-fire alarm caused by a known factor, such as
cooking smoke, the sensor can be muted by one short pressing of the Test/Mute
button. The mute period is 90 seconds, during which proper measures needs to
be made (ventilate the area, remove the smoke).
! Important notes
-After 90 seconds of Mute function, the sensor will alarm again if the smoke concentration is still too high.
-If you do not know the source of smoke, don’t ignore it. It can lead to casualties or property damage.
Fault mode
In case of fault alarm (such as the low battery, dismantling, sensor failure),
press the Test/Mute button for 3 seconds then release. The sensor will be
muted for 12 hours, during which you can replace the battery, re-mount the
device, self-test the sensor.
Press the Test/Mute button again for 3 seconds to re-activate the sensor to a
normal working state.
During the mute period, if another alarm occurs, the sensor alarm will be
activated.
Replace the battery
Remove the sensor, take out the battery and press the Test/Mute for 5 seconds
to release the residual energy stored in the sensor. Insert the new battery
and press Test/Mute button, this will make the device to self-test. If the
self-test is ok, the sensor will switch to a normal working state.
Daily maintenance
-Test the sensor at least once a week.
-Keep the sensor clean and without dust. You can clean it with a vacuum cleaner and a soft fabric material.
-Do not use solvents or cleaning agents to clean the smoke sensor. It can cause damages to the sensor.
-Don’t paint the sensor, it can affect the normal working of the product.
TROUBLESHOOTING
-If the sensor is not reacting, check if the sensor is properly installed on the bracket.
-Check if the battery has sufficient energy and replace it whenever necessary.
-In case of an anti-dismantling alarm check if the sensor is properly installed on the bracket.
-Re-position the sensor if there are many false alarms (non-fire alarms)
-Try to clean the sensor if there are many false alarms.
WARNING
-Always use indicated battery type, do not replace it with another battery.
-Proper dispose of the battery, do not incinerate, burn, dismantle the battery.
-Do not leave the product in extremely high-temperature environment.
-Do not disassemble the sensor, it will cause the warranty to be lost.
-Keep out of reach of children, especially the battery.
Disposal and recycling information
The crossed-out wheeled bin symbol on your product, battery, literature or
packaging reminds you that all electronic products and batteries must be taken
to separate waste collection points at the end of their working lives; they
must not be disposed of in the normal waste stream with household garbage. It
is the responsibility of the user to dispose of the equipment using a
designated collection point or service for separate recycling of waste
electrical and electronic equipment (WEEE) and batteries according to local
laws. Proper collection and recycling of your equipment help ensure EEE waste
is recycled in a manner that conserves valuable materials and protects human
health and the environment, improper handling, accidental breakage, damage,
and/or improper recycling at the end of its life may be harmful for health and
the environment.
For other languages please scan the QR code
www.tellur.com/manual-tll331281
ABN Systems International
Str. Mariner’Lori nr.29 Sector 1, Bucuresti, Romania
004.021.233.09.95
www.teltur.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>