AZ Patio Heaters 40″ Slate Top Wood Burning Firepit Installation Guide
- June 7, 2024
- AZ Patio Heaters
Table of Contents
AZ Patio Heaters 40″ Slate Top Wood Burning Firepit
WARNINGS:
- This fire bowl is intended for outdoor use only. Do not use on wooden decks.
- This fire bowl is intended to burn wood logs only. Do not burn coal, leaves, or other combustible materials in the fire bowl.
- Not for use by children. Keep children and pets away from the fire bowl.
- The fire bowl is hot. Use with caution. Do not touch the hot fire bowl with bare hands.
- Never leave any burning fire bowl unattended, always extinguish the fire completely before leaving the fire bowl.
- Do not use near flammable or combustible objects or materials.
- When the fire bowl is in use, the handle on the mesh screen can reach extreme temperatures that can cause serious injury to an unprotected hand. Use a poker or an appropriate heat resistant glove or pad when handling.
- Check local fire regulations and municipal by-laws for safe use.
FIRE PIT PARTS LIST
No. | PARTS | Qty |
---|---|---|
A | Handle | 1 |
B | Mesh Screen | 1 |
C | Log Grate | 1 |
D | Fire Bowl | 1 |
E | Slate Top | 1 |
F | Leg | 4 |
G | Support Ring | 1 |
H | Poker | 1 |
HARDWARE LIST
No. | Hardware | Qty |
---|---|---|
1 | M6*10 bolt | 10 |
2 | M6 Nut | 2 |
3 | M6*18 bolt | 4 |
Step By Step Assembly Instructions:
Step 1: Choose a level location for assembly. Remove all parts from packaging check parts list for missing parts.
Step 2: Attach Leg (F) to Slate Top (E) by using 8pcs M6*10 bolts (1) Do not fully tighten at first!
Step 3: Attach Support Ring (G) to 4 Legs (F) by using 4pcs M6*18 bolts(3) tightened, once ring is attached tighten all the bolts.
Step 4: Insert Handle (A) into mid hole of Mesh Screen (B) by using M6*10MM bolts (1) and M6 Nut (2) tightened.
Step 5: Place Log Grate(C) and Mesh Screen (B) into the Fire Bowl. Then put the Fire Bowl (D) into the Slate top.Now your fire pit is ready for use!
Read User Manual Online (PDF format)
Loading......