REVA DRAIN HOSE Installation Guide
- June 7, 2024
- REVA
Table of Contents
DRAIN HOSE INSTALLATION
WARNING|
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
- Remove the rear panel. See “Rear Panel” illustration for 5 screw locations.
- Insert the molded connection end of the drain hose through the hose clamp and over the discharge port on the drain pump, as shown.
- Locate the clamp.
- To keep the drain hose from kinking, coil the excess drain hose and secure it with the cable tie.
- Re-install the rear panel.
A. Drain pump discharge port
B. Hose clamp
C. Molded connection end of the drain hose
W11528110A
©2021. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>