CORSAIR Sabre RGB Pro FPS/MOBA Wireless Gaming Mouse User Guide
- June 7, 2024
- Corsair
Table of Contents
SABRE RGB PRO WIRELESS
FPS/MOBA Wireless Gaming Mouse
CHARGING THE MOUSE
IMPORTANT: The SABRE RGB PRO WIRELESS mouse must be fully charged before
its first use. Connect the mouse to an available USB 2.0 or 3.0 port on your
PC with the USB charging/data cable.
The battery / wireless status LED indicator on the mouse will begin pulsing
green to denote battery charging and will turn solid when charging is
complete.
GETTING TO KNOW YOUR MOUSE
A — QUICKSTRIKE LEFT-CLICK
BUTTON
B — MIDDLE CLICK BUTTON / SCROLL WHEEL
C — QUICKSTRIKE RIGHT-CLICK BUTTON
D — FORWARD BUTTON
E — BACK BUTTON
F — DPI CYCLE BUTTON
G — MULTI-PURPOSE LED INDICATOR
H — REPLACEABLE PTFE GLIDE PADS*
I — USB CHARGING / DATA PORT
J — OPTICAL GAMING SENSOR
K — PROFILE STATUS LED INDICATOR
L — PROFILE SWITCH BUTTON
M — POWER / WIRELESS MODE SWITCH
N — USB WIRELESS RECEIVER
O — USB CHARGING / DATA CABLE
*Replacements are available at www.corsair.com.
SETTING UP 2.4GHz SLIPSTREAM WIRELESS
Hyper-fast sub-1ms wireless connection is designed for no-compromise gaming- grade performance.
Toggle power / wireless mode switch to “2.4GHz” position to turn on your mouse.
Connect the USB wireless receiver to an available USB 2.0 or 3. x port located on the front panel of your PC or nearby USB port (e.g. on CORSAIR MM700, MM800, MM1000 mousepads).
The battery/wireless LED indicator will turn solid white when connected.
Download the iCUE software from www.corsair.com/downloads.
Run the installer program and follow instructions for installation.
If reconnection is required, initiate USB wireless receiver pairing via the iCUE software settings menu.
**SETTING UP BLUETOOTH® WIRELESS
**
Bluetooth wireless is best for everyday computing tasks, productivity, and office applications.
Initiate Bluetooth pairing on your Bluetooth 4.0 or higher enabled device.
Press and hold the DPI CYCLE button.
Toggle power / wireless mode switch to “BT” position to turn on your mouse.
Follow the instructions to successfully connect your device.
The battery/wireless LED indicator will turn solid blue when connected.
ON-THE-FLY DPI TUNING
The mouse has a unique feature where you can adjust the current onboard DPI stage setting in 50 DPI increments without the software, so you can jump right into the action while you find the perfect sensitivity setting.
| FUNCTION | SHORTCUT | DPI INDICATOR |
|---|---|---|
| INCREASE DPI BY 50 | HOLD DPI CYCLE BUTTON (F) AND PRESS THE FORWARD BUTTON | |
| (D) | BLINKS GREEN | |
| DECREASE DPI BY 50 | HOLD DPI CYCLE BUTTON (F) AND PRESS THE BACK BUTTON (E) |
BLINKS RED
RESET DPI STAGE| HOLD DPI CYCLE BUTTON (F) THEN BOTH FORWARD (D) AND BACK
BUTTONS (E) FOR 2 SECONDS| BLINKS YELLOW
On-the-fly DPI changes are saved to the onboard memory and can be further adjusted in granular 1 DPI steps in iCUE. If iCUE is running, then changes are saved to the software profile directly.
SABRE RGB PRO WIRELESS
| WEB: corsair.com| BLOG:
corsair.com/blog
---|---|---
PHONE: 888-222-4346| FORUM:
forum.corsair.com
SUPPORT: support.corsair.com| YOUTUBE:
youtube.com/corsairhowto
© 2021 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-002441 AA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>