LG SP11RA Wi-Fi Soundbar User Manual
- June 7, 2024
- LG
Table of Contents
LG SP11RA Wi-Fi Soundbar
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for
future reference.
To view the instructions of advanced features, visit http://www.lg.com
or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your
product.
Sound bar
Remote Control Receiver / Status Display
Wireless Rear Speakers
Wireless Subwoofer – Install it close to the sound bar.
External Device – (Blu-ray player, game console, etc.)
-
Connect the sound bar to your TV via an optical cable or an HDMI cable.
-
If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an HDMI cable.
-
Connect to power in the following order: wireless subwoofer wireless rear speakers sound bar. Then, turn on the sound bar. When the connection is automatically established with the sound bar, the LEDs on the wireless subwoofer and wireless rear speakers will light up in green.
-
Using the product with your TV
Press the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.
On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
When the TV is properly connected to the product, “OPT”, “ARC”, or “E-ARC” will appear on the status display with a sound.
-
Connecting the product to your smartphone via Wi-Fi
Connect your smartphone to Wi-Fi.
Install the LG Sound Bar app on Google Play or the App Store.
Run the LG Sound Bar app and follow the instructions.
The product will connect to your smartphone and you can control the product with LG Sound Bar app.
-
Connecting the product to your smartphone via Bluetooth
Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. (
On)
Press the Bluetooth pair button. After a moment, you will see “BT READY” on the status display.
Find and tap “LG_Speaker_SP11RA_XXXX” or the name you registered on the Google Home app.
When the product is connected to your smartphone via Bluetooth, you can see the status display change from “PAIRED” “Connected Bluetooth device name” “BT”.
If you see a red LED on the back of the wireless subwoofer or wireless rear speakers, it means that the sound bar is not connected to the speakers. If this is the case, connect them in the following order.
Press the Power ** button on the sound bar to turn it off.
Press the PAIRING (Pairing) button on the back of the disconnected wireless
subwoofer or wireless rear speakers. Check if each LED blinks green.
– If you still see a red LED on the back of the wireless subwoofer or wireless
rear speakers, press and hold the button on the back of the subwoofer or
wireless rear speakers again.
Press the Power** button on the sound bar to turn it on.
When the connection is established, you will see a green LED light on the back
of the wireless subwoofer or wireless rear speakers light up in green.
Keep the sound bar, the subwoofer and wireless rear speakers away from the
device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to
prevent wireless interference.
● Some speakers may not make sound depend on the input source. Select CINEMA
sound mode to listen through all speakers.
- Design and specifications are subject to change without notice.
- Google Play is a trademark of Google LLC.
Replacement of Battery
Specification
Power requirements
- Refer to the main label.
Power consumption
- Refer to the main label.
Sound bar dimensions (W x H x D): Approx. 1443.0 mm x 63.0 mm x 146.0 mm
(56.8 inch x 2.5 inch x 5.7 inch)
Wireless rear speakers dimensions (W x H x D): Approx. 130.0 mm x 211.5
mm x 191.2 mm (5.1 inch x 8.3 inch x 7.5 inch)
Bus Power Supply (USB): 5 V ⎓ 500 mA
Amplifier (Total RMS Output power): 770 W RMS
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
media, shipping, and handling) upon email request to
opensource@lge.com.
This offer is valid for a period of three years after our last shipment of
this product. This offer is valid to anyone in receipt of this information.
Industry Canada Statement
[For having wireless function (WLAN, Bluetooth,…)] This device contains
licence-exempt transmitter(s)/ receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
CAN ICES-003(B) / NMB-003(B)
IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,…)] This equipment complies
with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm
(7.8 inches) between the antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT
WARNING
[For product having the wireless function using 5 GHz frequency bands]
i. the device for operation in the band 5150–5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the maximum antenna gain
permitted for devices in the bands 5250- 5350 MHz and 5470-5725 MHz shall be
such that the equipment still complies with the e.i.r.p. limit;
iii. for devices with detachable antenna(s), the maximum antenna gain
permitted for devices in the band 5725- 5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as appropriate; and
iv. [for devices operating in the band 5250-5350 MHz having an e.i.r.p.
greater than 200 mW] antenna type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the e.i.r.p. elevation mask
requirement set forth in section 6.2.2.3 of RSS-247 shall be clearly
indicated.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Copyright © 2021 LG Electronics Inc. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>