UtraPro 50021 Plug In Dual Outlet Digital Timer with Tethered Button User Guide
- June 6, 2024
- UtraPro
Table of Contents
Read instructions or
watch the easy-to-follow videos.
Scan QR code or visit https://byjasco.com/50021i
50021
PLUG-IN DUAL-OUTLET DIGITAL TIMER WITH TETHERED BUTTON
SETUP
- If no numbers are visible on-screen, plug the timer into an outlet and charge for 1 hour. Once charged, press the reset ( R ) button in the lower-right corner using a toothpick or pencil.
- Use up ( ∧ ) and down ( ∨ ) arrows to set the time — note AM or PM.
Note: After the timer is charged, it can be removed from the outlet for easy programming. Return to the outlet when finished.
| 
---|---
PROGRAMMING OPTIONS
DEFAULT TIMER
Two ON/OFF programs feature default settings. To activate the default times,
press the ON TIME or OFF TIME button. Indicator arrows appear on the
display to show which programs are set. To deactivate a setting, press the
desired button again.
Note: Outlets operate simultaneously for any schedules.
CUSTOMIZED TIMER
Press either ON TIME button, then use up (∧ ) and down ( ∨) arrows to set
on time. Press the ON TIME button again or wait five seconds to store the
program and return to the clock display.
Press either OFF TIME button, then use up (
∧ ) and down ( ∨ ) arrows to set off time. Press the OFF TIME button
again or wait five seconds to store the program and return to the clock
display.
Note: An indicator arrow ( or ) appears on-screen to show which settings
are active.
OVERRIDE OPTIONS
Override scheduled programs and manually operate the connected device(s) using
the tethered button or ON/ OFF button below the display screen. If a scheduled
program is running and the device is on, press either button to turn off the
device. The device remains off until the next scheduled program begins, or the
button is pressed again. If a scheduled program is running and the device is
off, press either button to turn on the device. It remains on until the next
scheduled program ends, or the button is pressed again. When no programs are
active, press either button to turn ON/OFF the device manually.
FCC/IC
Supplier Declaration of Conformity
Model #: 50021
Jasco Products Co., 10 E.
Memorial Rd., Oklahoma City, OK 73114,
www.byjasco.com
This device complies with Part 15 of the FCC and Industry Canada license-
exempt RSS standards. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee interference will not occur in
a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3(B)/NMB-3(B)
SPECIFICATIONS
Total ratings for both outlets:
125VAC, 60Hz
15A 1875W general/resistive
5A 625W tungsten
1/2HP motor
Works with all LED and CFL bulbs
WARNING
RISK OF ELECTRICAL SHOCK
- PLUG DIRECTLY INTO AN ELECTRICAL OUTLET
- DO NOT USE IN WET LOCATIONS
- USE INDOORS ONLY
- UNPLUG TIMER BEFORE CLEANING
| RISK OF FIRE
-
DO NOT USE TO CONTROL
APPLIANCES THAT CONTAIN HEATING ELEMENTS (COOKING APPLIANCES, HEATERS, IRONS, ETC.) -
DO NOT EXCEED ELECTRICAL RATINGS
-
DO NOT USE WITH EXTENSION CORDS
---|---
MADE IN CHINA/HECHO EN CHINA
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City,
OK 73114.
This Jasco product comes with a 2-year limited warranty. Visit
www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7 AM-8 PM, M-F,
Central Time.
©JASCO 2020 | 50021 | 09/21/20 v1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>