CORSAIR MP600 PRO 2TB M.2 NVMe PCIe Gen. 4×4 Hydro X E. SSD User Guide
- June 6, 2024
- Corsair
Table of Contents
MP600 PRO
MP600 PRO
Gen4 PCIe x4 NVMe M.2 SSD
User Guide
IMPORTANT NOTICE
Quick Start Guide is a general installation guide and does not cover the
specifics of individual cases or radiator mounting.
CORSAIR recommends you thoroughly leak-test your custom cooling system for at
least 24 hours to ensure that the system is securely sealed and operating
reliably. CORSAIR warranty does not cover any hardware damage resulting from
the poorly executed, improper, and otherwise hasty assembly of your custom
water cooling system.
Disassembly of CORSAIR HYDRO X products is highly discouraged due to the
complex design of components. Such action may result in irreparable
mechanical, electrical or chemical damage that may void the warranty.
For an exact and up-to-date product compatibility list, please refer to the
CORSAIR website.
PREREQUISITES (NOT INCLUDED)
A — x1 PHILLIPS-HEAD SCREWDRIVER
INSTALLATION
Precaution: Take care to discharge any electrostatic charges.
-
Power down your system.
-
Identify an available M.2 key M 2280 slot on your system, referring to your motherboard or system documentation.
-
Remove any cover from the M.2 slot and screws. Take care to ensure no screws remain on standoffs for shorter M.2 cards.
-
Insert and secure M.2 with a screw.
-
Install the two (2) appropriate CORSAIR XF G1/4” BSPP threaded-type fittings (not included) into the water block ports and tighten them by hand. Do not use any tools to tighten (i.e. pliers)
-
Install tubing and secure it to finalize the adding of the water block to the water-cooling loop. Do not forget to leak-test the system before fully powering on your PC.
-
Flow orientation is not important. This product works great with the flow in either direction.
WEB: corsair.com
PHONE: 888-222-4346
SUPPORT: support.corsair.com
BLOG: corsair.com/blog
FORUM: forum.corsair.com
YOUTUBE: youtube.com/corsairhowto
© 2020 CORSAIR MEMORY Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-002311 AA