COSOOS Q400 Magnetic-Dual Wireless Charger User Manual
- June 6, 2024
- COSOOS
Table of Contents
Magnetic-Dual
Wireless Charger
www.amazon.com/cosoos
[email protected]
Thanks for Choosing COSOOS Qi Wireless Charger
This is a wireless charger for Qi-supported smartphones. It will enable you with a better charging experience and allow you to enjoy the fun of digital products easily. Please read the manual carefully before using this product, and keep properly this manual for possible future reference
Magnetic-Duo combines a Charger Stand and a Charger Mat by magnets, they can either work together or separately.
Connect to Wall Adapter
- Plugin the power adapter.
- Connect the USB cable to the charger stand and Mag-Click the charger mat to the charger, then both of them can work at the same time.
Remark: Intelligent Chipset built-in, long-term stand-by made worry-free.
Wireless Charger Stand Work-Alone Mode and Its LED Indication
- When powered on, the LED indicator shines in BLUE for 5 seconds then lights off and enter into Standby Mode
- When a wireless charging enabled mobile phone is being placed on the charger, LED will indicate differently in different situations Charging: LED will shine constantly in GREEN during the whole charging process.
Fully Charged: For Samsung, LED Off;
For iPhone, LED in Conti nous Green.
FOD/Malfunction: LED blinks in GREEN & BLUE in turns at a 0.5-second pace.
Charger Mat Work-Alone Mode and Its LED Indication
Supports Qi-Enabled Phones and Samsung Watch Power Input: SV=2A
- When powered on, the LED indicator shines in BLUE for 5 seconds then lights off and enters into Stand-by Mode.
- When a wireless charging enabled mobile phone is being placed on the charger, LED will indicate differently in a different situation
• Charging: LED will shine constantly in GREEN during the whole charging process.
• Fully Charged: For Samsung, LED Off; for iPhone, LED in Continous Green.
• FOD/Malfunction: LED blinks in GREEN & BLUE in turns at a 0.5-second pace.
Charger Specification
Input (DC): 5.0V/2.0A; 9.0V/1.SA
Output: SW/7.SW/l0W(self adjustable)
Frequency: 110-205Khz Conversion Rate 72%
Dimension: 84.8143.7123.6mm
Tip
- Do not squeeze or collide.
- Do not disassemble or throw into fire or water to avoid causing a short circuit.
- Do not use wireless chargers in extremely hot, humid, or corrosive environments.
- Do not use a near magnetic bank card or IC card to avoid ma [functioning.
- Please keep a minimum of 20cm between implantable me medical devices (pacemaker, implantable cochlear. etc) to avoid potential interference with the medical device.
- Keep out of reach of children and pets.
- The dual wireless charger needs QC3.0 18w fast wall charger in order to work simultaneously. If the wall charger is not up to 18w, the wireless charger may just work separately.
The images in this manual are sketch drawings of the actual products only,
actual product might be slightly different.
Package Including: 1 • Wireless Charger Stand;
1 • Wireless Charger Mat; 1 • 100cm Power Cable;
1User Manual.
Trouble Shooting
Issu
| Detail|
Solution
---|---|---
No
Charge
| The indicator light keeps green & blue flashing/Do not charge
simultaneously| 1) Restart your device and make sure your device supports Qi
wireless charge and it is without any phone case, bank card, or metal
attachment, retry again
2) Move your device and find out the wireless charging spot between your
device and the wireless charger. While charging, the indicator light of the
wireless charger should be solid green.
3) See if the temperature of the device is hot, the wireless charger will stop
charging until the temperature goes down
4) Use a stand or pad to charge your device separately, if it works alone, it
should be a wall charger issue and contact us at
[email protected]
| Stop charging/
Discontinuous charging| 1) See if the temperature of the device is hot. the
wireless charger will stop charging until the temperature goes down.
2) Use another QC3.0 fast wall charger with a wireless charger and see if it
is a wall charger issue. If you just have a normal wall charger, use it to
charge stand or pad alone and see if it is a wall charger issue
Slow
Charge| | 1) Make sure your devices support quick wireless charge and use
QC3.0 fast wall charger.
2) Move your device and wireless charger need precise alignment.
3) Take off the case and turn off the device while charging
4) Use a stand or pad to charge it and see if it can be charged quicker.
Heat
Issue| | 1) It is normal to produce heat while charging
2) Case or inaccurate placement also will lead to the heat issue
3) Turn off the device while charging will stop the heat issue.
Noise| | It can be a current sound or from the wall charger. Use a different
wall charger and see if the noise can be gone.
Warranty Policy & Support
COSOOS products provide a 12-months warranty and lifetime friendly customer service. Please send your order number to [email protected] and register the warranty.
https://www.facebook.com/Cosoos-Global-112444390111256| 
https://twitter.com/COSOOS_SERVICE
---|---
Facebook Page
Cosmos Global| Twitter
@COSOOS SERVICE
Email: [email protected]
Website: www.cosoos.com
More Choice From COSOOS, Contact Us At [email protected] for More Discount.
Flashlight with 18650 Rechargeable Battery and Charger
https://www.amazon.com/dp/B077TH96TF?ref_=ast_sto_dp
Scan for info
4-Bay Battery Charger
https://www.amazon.com/dp/B07H32WVTF
Scan for info
Charging Station with 1 QC3.0
https://www.amazon.com/dp/B0794Z2K4W
Scan for info
39inch Soundbar
(Detachable Design)
https://www.amazon.com/dp/B07RP9SS56?ref_=ast_sto_dp
Scan for info
Documents / Resources
|
COSOOS Q400 Magnetic-Dual Wireless
Charger
[pdf] User Manual
Q400, Magnetic-Dual Wireless Charger, Wireless Charger
---|---