Soundcore A3930 Liberty 2 Pro true Wireless Earbuds User Guide
- June 6, 2024
- Soundcore
Table of Contents
Soundcore Liberty 2 Pro
Upgraded Version
Quick Start Guide
For FAQs and more information, please visit :
soundcore.com/support
Model: A3930, A3930L, A3930R 51005002xxx V01
SUPPORT
For FAQs, detailed user manual, and more information, please visit www.soundcore.com/support
WEARING
Choose the EarTips and Liquid Silicone EarWings that fit your ears best.
APP
Download the Soundcore app to customize the user interface (e.g. adjust volume, control playback, activate Siri), trace HearID, adjust EQ, update firmware, and explore more.
CHARGING
Fully dry off the earbuds and the USB-C charging port before charging. Use a
certified USB-C charging cable and charger to prevent any damage. For wireless
charging, position the charging case at the center of your
wireless charger.
POWERING ON/OFF
Open the charging case, the earbuds will automatically power on. To power off, place the earbuds in the charging case and close it.
PAIRING
Open the charging case, the earbuds will automatically enter the Bluetooth pairing mode. On your device’s Bluetooth device list, select “Soundcore Liberty 2 Pro +” to connect. * “Soundcore Liberty 2 Pro +” is the Bluetooth device name of your Soundcore Liberty 2 Pro Upgraded Version.
CONTROL
1s: Press and hold for 1 second x1: Press once x2: Press twice
1s: Press and hold for 1 second
RE-PAIRING
Pairing with another device: Place the earbuds in the charging case, make sure they are being charged, and leave the case open. Press and hold the button on the case for 3 seconds until the earbud LED indicators to flash white to enter pairing mode.
RESET
Reset if the earbuds cannot properly pair with each other or with other devices. Place the earbuds in the charging case, make sure they are being charged, and leave the case open. Press and hold the button on the case for 10 seconds until the earbud LED indicators flash red 3 times and then turn white. Wait until the LED indicator on one of the earbuds flashes fast while the other flashes slowly. This confirms that the reset was successful and your earbuds can be connected normally.
LED LIGHT GUIDE
Steady white
Flashing white
Customer Service
18-month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this
product.
**service@soundcore.com
**support.mea@soundcore.com (For Middle
East and Africa Only)
support@anker.com
+1 (800) 988 7973 (US) Mon-Fri 9:00 – 17:00 (PT)
+44 (0) 1604 936200 (UK) Mon-Fri 6:00 – 11:00 (GMT)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>